PMBTA44 400 V, 0.3 A NPN high-voltage low VCEsat (BISS) transistor Rev. 01 — 22 February 2008 Product data sheet 1. Product profile 1.1 General description NPN high-voltage low VCEsat Breakthrough In Small Signal (BISS) transistor in a SOT23 (TO-236AB) small Surface-Mounted Device (SMD) plastic package. 1.2 Features n Low current (max. 300 mA) n High voltage (max. 400 V) n AEC-Q101 qualified 1.3 Applications n n n n n n LED driver for LED chain module LCD backlighting High Intensity Discharge (HID) front lighting Automotive motor management Hook switch for wired telecom Switch mode power supply 1.4 Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit VCEO collector-emitter voltage open base - - 400 V IC collector current - - 300 mA hFE DC current gain VCE = 10 V; IC = 10 mA 50 - 200 PMBTA44 NXP Semiconductors 400 V, 0.3 A NPN high-voltage low VCEsat (BISS) transistor 2. Pinning information Table 2. Pinning Pin Description 1 base 2 emitter 3 collector Simplified outline Symbol 3 3 1 1 2 2 sym021 3. Ordering information Table 3. Ordering information Type number PMBTA44 Package Name Description Version - plastic surface-mounted package; 3 leads SOT23 4. Marking Table 4. Marking codes Type number Marking code[1] PMBTA44 W3* [1] * = -: made in Hong Kong * = p: made in Hong Kong * = t: made in Malaysia * = W: made in China PMBTA44_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 22 February 2008 2 of 12 PMBTA44 NXP Semiconductors 400 V, 0.3 A NPN high-voltage low VCEsat (BISS) transistor 5. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit VCBO collector-base voltage open emitter - 500 V VCEO collector-emitter voltage open base - 400 V VEBO emitter-base voltage open collector - 6 V IC collector current - 300 mA ICM peak collector current single pulse; tp ≤ 1 ms - 300 mA IBM peak base current single pulse; tp ≤ 1 ms - 100 mA Ptot total power dissipation Tamb ≤ 25 °C - 250 mW [1] Tj junction temperature - 150 °C Tamb ambient temperature −55 +150 °C Tstg storage temperature −65 +150 °C [1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. 006aab196 300 Ptot (mW) 200 100 0 −75 −25 25 75 125 175 Tamb (°C) FR4 PCB, standard footprint Fig 1. Power derating curve SOT23 (TO-236AB) PMBTA44_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 22 February 2008 3 of 12 PMBTA44 NXP Semiconductors 400 V, 0.3 A NPN high-voltage low VCEsat (BISS) transistor 6. Thermal characteristics Table 6. Symbol Rth(j-a) [1] Thermal characteristics Parameter Conditions [1] thermal resistance from junction to in free air ambient Min Typ Max Unit - - 500 K/W Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. 006aab151 103 duty cycle = 1 Zth(j-a) (K/W) 0.75 0.5 102 0.33 0.2 0.1 0.05 10 1 0.02 0.01 0 10−1 10−5 10−4 10−3 10−2 10−1 1 10 102 103 tp (s) FR4 PCB, standard footprint Fig 2. Transient thermal impedance from junction to ambient as a function of pulse duration for SOT23 (TO-236AB) PMBTA44_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 22 February 2008 4 of 12 PMBTA44 NXP Semiconductors 400 V, 0.3 A NPN high-voltage low VCEsat (BISS) transistor 7. Characteristics Table 7. Characteristics Tamb = 25 °C unless otherwise specified. Symbol Parameter ICBO Conditions Min Typ Max Unit collector-base cut-off VCB = 320 V; IE = 0 A current VCB = 320 V; IE = 0 A; Tj = 150 °C - - 100 nA - - 10 µA IEBO emitter-base cut-off current VEB = 4 V; IC = 0 A - - 100 nA hFE DC current gain VCE = 10 V IC = 10 mA VCEsat collector-emitter saturation voltage 50 - 200 IC = 50 mA [1] 45 - - IC = 100 mA [1] 40 - - IC = 1 mA; IB = 0.1 mA - - 400 mV IC = 10 mA; IB = 1 mA - - 500 mV IC = 50 mA; IB = 5 mA [1] - - 750 mV [1] - - 850 mV 20 - - MHz VBEsat base-emitter saturation voltage IC = 10 mA; IB = 1 mA fT transition frequency VCE = 10 V; IE = 10 mA; f = 100 MHz Cc collector capacitance VCB = 20 V; IE = ie = 0 A; f = 1 MHz - - 7 pF Ce emitter capacitance - - 180 pF [1] VEB = 0.5 V; IC = ic = 0 A; f = 1 MHz Pulse test: tp ≤ 300 µs; δ ≤ 0.02. PMBTA44_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 22 February 2008 5 of 12 PMBTA44 NXP Semiconductors 400 V, 0.3 A NPN high-voltage low VCEsat (BISS) transistor 006aab190 200 006aab191 0.3 IB (mA) = 26 hFE IC (A) 23.4 20.8 150 18.2 (1) 0.2 15.6 13 10.4 (2) 7.8 100 5.2 0.1 (3) 2.6 50 0 10−1 1 10 102 103 0 0 1 2 3 4 IC (mA) 5 VCE (V) Tamb = 25 °C VCE = 10 V (1) Tamb = 100 °C (2) Tamb = 25 °C (3) Tamb = −55 °C Fig 3. DC current gain as a function of collector current; typical values 006aab192 1.2 VBE (V) Fig 4. Collector current as a function of collector-emitter voltage; typical values 006aab193 1.2 VBEsat (V) (1) 0.8 (1) 0.8 (2) (2) (3) (3) 0.4 0 10−1 0.4 1 10 102 103 0 10−1 1 VCE = 10 V 102 103 IC/IB = 5 (1) Tamb = −55 °C (1) Tamb = −55 °C (2) Tamb = 25 °C (2) Tamb = 25 °C (3) Tamb = 100 °C (3) Tamb = 100 °C Fig 5. Base-emitter voltage as a function of collector current; typical values Fig 6. Base-emitter saturation voltage as a function of collector current; typical values PMBTA44_1 Product data sheet 10 IC (mA) IC (mA) © NXP B.V. 2008. All rights reserved. Rev. 01 — 22 February 2008 6 of 12 PMBTA44 NXP Semiconductors 400 V, 0.3 A NPN high-voltage low VCEsat (BISS) transistor 006aab194 1 006aab195 103 RCEsat (Ω) VCEsat (V) 102 10−1 10 (1) (2) (3) (1) (2) (3) 1 10−2 10−1 1 10 102 103 10−1 10−1 1 IC (mA) IC/IB = 5 102 103 IC (mA) IC/IB = 5 (1) Tamb = 100 °C (1) Tamb = 100 °C (2) Tamb = 25 °C (2) Tamb = 25 °C (3) Tamb = −55 °C (3) Tamb = −55 °C Fig 7. Collector-emitter saturation voltage as a function of collector current; typical values Fig 8. Collector-emitter saturation resistance as a function of collector current; typical values PMBTA44_1 Product data sheet 10 © NXP B.V. 2008. All rights reserved. Rev. 01 — 22 February 2008 7 of 12 PMBTA44 NXP Semiconductors 400 V, 0.3 A NPN high-voltage low VCEsat (BISS) transistor 8. Test information 8.1 Quality information This product has been qualified in accordance with the Automotive Electronics Council (AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is suitable for use in automotive applications. 9. Package outline 3.0 2.8 1.1 0.9 3 0.45 0.15 2.5 1.4 2.1 1.2 1 2 1.9 0.48 0.38 Dimensions in mm 0.15 0.09 04-11-04 Fig 9. Package outline SOT23 (TO-236AB) 10. Packing information Table 8. Packing methods The indicated -xxx are the last three digits of the 12NC ordering code.[1] Type number PMBTA44 [1] Package SOT23 Description 4 mm pitch, 8 mm tape and reel 3000 10000 -215 -235 For further information and the availability of packing methods, see Section 14. PMBTA44_1 Product data sheet Packing quantity © NXP B.V. 2008. All rights reserved. Rev. 01 — 22 February 2008 8 of 12 PMBTA44 NXP Semiconductors 400 V, 0.3 A NPN high-voltage low VCEsat (BISS) transistor 11. Soldering 2.90 2.50 0.85 2 1 solder lands 1.30 3.00 2.70 0.85 solder resist solder paste 3 occupied area 0.60 (3x) Dimensions in mm 0.50 (3x) 0.60 (3x) 1.00 3.30 sot023 Fig 10. Reflow soldering footprint SOT23 (TO-236AB) 3.40 1.20 (2x) solder lands solder resist occupied area 2 1 4.60 4.00 1.20 3 Dimensions in mm 2.80 preferred transport direction during soldering 4.50 sot023 Fig 11. Wave soldering footprint SOT23 (TO-236AB) PMBTA44_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 22 February 2008 9 of 12 PMBTA44 NXP Semiconductors 400 V, 0.3 A NPN high-voltage low VCEsat (BISS) transistor 12. Revision history Table 9. Revision history Document ID Release date Data sheet status Change notice Supersedes PMBTA44_1 20080222 Product data sheet - - PMBTA44_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 22 February 2008 10 of 12 PMBTA44 NXP Semiconductors 400 V, 0.3 A NPN high-voltage low VCEsat (BISS) transistor 13. Legal information 13.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 13.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. 13.3 Disclaimers General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. 13.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 14. Contact information For additional information, please visit: http://www.nxp.com For sales office addresses, send an email to: [email protected] PMBTA44_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 22 February 2008 11 of 12 PMBTA44 NXP Semiconductors 400 V, 0.3 A NPN high-voltage low VCEsat (BISS) transistor 15. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 8.1 9 10 11 12 13 13.1 13.2 13.3 13.4 14 15 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 Thermal characteristics. . . . . . . . . . . . . . . . . . . 4 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Test information . . . . . . . . . . . . . . . . . . . . . . . . . 8 Quality information . . . . . . . . . . . . . . . . . . . . . . 8 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8 Packing information. . . . . . . . . . . . . . . . . . . . . . 8 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Legal information. . . . . . . . . . . . . . . . . . . . . . . 11 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contact information. . . . . . . . . . . . . . . . . . . . . 11 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2008. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 22 February 2008 Document identifier: PMBTA44_1