Features • • • • • • • • • 10 kV – ESD Protection Two Comparators with Common Reference Tight Threshold Tolerance Constant Threshold NPN Output Interference and Damage-protection According to VDE 0839 and ISO/CD 7637 EMI Protection Reversal Polarity Protection Load-dump Protection Description The bipolar U4793B is designed to monitor overload or a short circuit in automotive or industrial applications. The threshold is tied to V4,6 = VS - VT where VT = 44.5 mV. It is independent of the supply voltage, VS. If the voltage drop across shunt resistor, Rsh, exceeds this value, the output is turned on, otherwise the output is turned off. Current Monitor IC U4793B Without supply voltage or open input Pin 8, the output is turned off. The output breakdown voltage is determined by the Z-diodes Z3 and Z5 with a typical value of VZ = 22 V. An unused comparator input must be connected to Pin 7. Block Diagram Figure 1. Schematic and Application Circuit VS V Batt 2 R sh 7 Z 2 + - 4 5 OUT1 3 OUT2 & Z5 0.6 VS R sh + 8 + - & 6 Z3 1 Load R1 150 W Rev. 4557A–AUTO–11/02 1 Pin Configuration Figure 2. Pinning DIP8/SO8 GND VS OUT2 IN1 1 2 3 4 8 7 6 5 Input switch VRef IN2 OUT1 Pin Description Pin Symbol 1 GND 2 VS 3 OUT2 4 IN1 5 OUT1 6 IN2 Function Reference point, ground Supply voltage Output 2 Input 1 Output 1 Input 2 7 VRef 8 Input switch Reference voltage Input switch Absolute Maximum Ratings Parameters Symbol Value Unit VS 16.5 V Current consumption t = 2 ms, measured at Pin 1 (GND) Pin 1 I1 1.5 A Output current I3,5 20 mA -V4,6 6 V Tamb = 125°C,DIP8 SO8 Ptot 220 150 mW mW Tamb = 95°C, DIP8 SO8 Ptot 420 360 mW mW Tamb = 60°C, DIP8 SO8 Ptot 690 560 mW mW Ambient temperature range Tamb -40 to +125 °C Storage temperature range Tstg -55 to +125 °C Tj 150 °C Symbol Value Unit RthJA RthJA 110 160 K/W K/W Supply voltage Pin 2, 7 Pin 3, 5 Input voltage reference point Pin 7 Pin 4, 6 Power dissipation Junction temperature Thermal Resistance Parameters Junction ambient 2 DIP8 SO8 U4793B 4557A–AUTO–11/02 U4793B Electrical Characteristics VS = 9 V to 15 V, Tamb = -40°C to +125°C, unless otherwise specified (see Figure 1) No. 1 Parameters Supply voltage 1.2 Internal Z-diode Z2 1.3 Current consumption 1.5 2 2.1 2.2 3 Output saturation voltage 3.5 3.6 3.7 3.8 3.9 3.10 4 Typ. Max. Unit Type* 2, 7 VS 9 15 V A 2 VZ 20 V A I1 3.5 4.8 I1 2.8 I1 2.0 1 6.0 mA C VS = 12 V measured Tamb = 25°C 1 3.4 6.0 mA A VS = 12 V measured Tamb = 125°C 1 2.6 3.2 mA C VS = 9 V, I3,5 = 10 mA Tamb = 25°C 3, 5 0.5 V A 3, 5 V A Vsat VZ 21 -VT 42 44 46 mV C -VT 43 44.5 46 mV A -VT 44.5 46 47.5 mV C µV/K C Control Signal Control signal threshold I3,5 = 1 mA, figure 3 Tamb = -40°C 4, 6 I3,5 = 1 mA, figure 3 Tamb = 25°C 4, 6 I3,5 = 1 mA, figure 3 Tamb = 125°C 4, 6 Temperature coefficient of control signal threshold Input currents Pins connected to 12 V Input currents Pins connected to 12 V TC Tamb = -40°C 15 II 100 II 60 Tamb = 125°C II Tamb = -40°C Tamb = 25°C Tamb = 25°C 4, 6 190 nA C 150 nA A 30 110 nA C II 5.5 7.0 µA C 100 II 4.0 5.5 µA A Tamb = 125°C II 3.0 4.5 µA C Switch identification Tamb = -40°C V8 0.47 ´ VS 0.69 ´ VS V C V8 0.47 ´ VS 0.69 ´ VS V A V8 0.47 ´ VS 0.69 ´ VS V C 8 5.0 Threshold 4.1 4.2 Min. VS = 12 V measured Tamb = -40°C Output Z-diodes Z3, Z5 3.3 3.4 Symbol Output 3.1 3.2 Pin Supply 1.1 1.4 Test Conditions Threshold voltage 4.3 Switch identification Tamb = 25°C Switch identification Tamb = 125°C 8 0.6 VS *) Type means: A = 100% tested, B = 100% correlation tested, C = Characterized on samples, D = Design parameter 3 4557A–AUTO–11/02 Electrical Characteristics (Continued) VS = 9 V to 15 V, Tamb = -40°C to +125°C, unless otherwise specified (see Figure 1) No. 5 5.1 5.2 5.3 5.4 5.5 5.6 Parameters Test Conditions Pin Symbol Min. Typ. Max. Unit Type* Switch Delay (RL = 10 kW connected from Pin 3 or Pin 5 to VBatt) Delay time Switch-on High to low Delay time Switch-off Low to high Tamb = -40°C td(on) 3 4 6 µs C Tamb = 25°C td(on) 4 6 8 µs C td(on) 5 7 9 µs C td(off) 16 24 32 µs C Tamb = 25°C td(off) 18 30 50 µs A Tamb = 125°C td(off) 30 50 70 µs C Tamb = 125°C 3, 5 Tamb = -40°C *) Type means: A = 100% tested, B = 100% correlation tested, C = Characterized on samples, D = Design parameter Figure 3. Timing Diagram V 4,6 (V) 12.00 11.90 V0 (V) t d(off) t d(on) 12 6 0 10 20 30 40 50 60 t (ms) Figure 4. Threshold Voltage = f (VBatt and Temperature) -V T ( mV ) 48 47 Tamb = 125°C 46 95°C 45 25°C 44 -40°C 43 42 41 40 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 V Batt ( V ) 4 U4793B 4557A–AUTO–11/02 U4793B Ordering Information Extended Type Number Package Remarks U4793B DIP8 – U4793B-FP SO8 – Package Information Package DIP8 Dimensions in mm 7.77 7.47 9.8 9.5 1.64 1.44 4.8 max 6.4 max 0.5 min 3.3 0.58 0.48 0.36 max 9.8 8.2 2.54 7.62 8 5 technical drawings according to DIN specifications 1 4 Package SO8 Dimensions in mm 5.2 4.8 5.00 4.85 3.7 1.4 0.25 0.10 0.4 1.27 6.15 5.85 3.81 8 0.2 3.8 5 technical drawings according to DIN specifications 1 4 5 4557A–AUTO–11/02 Atmel Headquarters Atmel Operations Corporate Headquarters Memory 2325 Orchard Parkway San Jose, CA 95131 TEL 1(408) 441-0311 FAX 1(408) 487-2600 Europe Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland TEL (41) 26-426-5555 FAX (41) 26-426-5500 Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimhatsui East Kowloon Hong Kong TEL (852) 2721-9778 FAX (852) 2722-1369 Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL (81) 3-3523-3551 FAX (81) 3-3523-7581 2325 Orchard Parkway San Jose, CA 95131 TEL 1(408) 441-0311 FAX 1(408) 436-4314 Microcontrollers 2325 Orchard Parkway San Jose, CA 95131 TEL 1(408) 441-0311 FAX 1(408) 436-4314 La Chantrerie BP 70602 44306 Nantes Cedex 3, France TEL (33) 2-40-18-18-18 FAX (33) 2-40-18-19-60 ASIC/ASSP/Smart Cards Zone Industrielle 13106 Rousset Cedex, France TEL (33) 4-42-53-60-00 FAX (33) 4-42-53-60-01 RF/Automotive Theresienstrasse 2 Postfach 3535 74025 Heilbronn, Germany TEL (49) 71-31-67-0 FAX (49) 71-31-67-2340 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL 1(719) 576-3300 FAX 1(719) 540-1759 Biometrics/Imaging/Hi-Rel MPU/ High Speed Converters/RF Datacom Avenue de Rochepleine BP 123 38521 Saint-Egreve Cedex, France TEL (33) 4-76-58-30-00 FAX (33) 4-76-58-34-80 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL 1(719) 576-3300 FAX 1(719) 540-1759 Scottish Enterprise Technology Park Maxwell Building East Kilbride G75 0QR, Scotland TEL (44) 1355-803-000 FAX (44) 1355-242-743 e-mail [email protected] Web Site http://www.atmel.com © Atmel Corporation 2002. Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life support devices or systems. Atmel ® is the registered trademark of Atmel. Other terms and product names may be the trademarks of others. Printed on recycled paper. 4557A–AUTO–11/02 xM