60'- Transient Voltage Suppressors Series MERITEK FEATURES For surface mounted applications in order to optimize board space. Low profile package. Built-in strain relief. Glass passivated junction. Low inductance. Excellent clamping capability. SMC/DO-214AB Repetition Rate (duty cycle): 0.01%. Fast response time: typically less than 1.0ps from 0 volt to BV for unidirectional types. Typical IR less than 1µA. High Temperature soldering: 260°C/10 seconds at terminals. MECHANICAL DATA M Case: JEDEC DO-214AB. Molded plastic over glass passivated junction. Terminal: Solder plated, solderable per MIL-STD-750, Method 2026. Polarity: Color band denotes cathode except Bidirectional. Standard Packaging: 16mm tape (EIA STD RS-481). Weight: 0.007 ounce, 0.21 grams. MM AXIMUM RATINGS AND CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. RATING Peak Pulse Power Dissipation on 10/1000 s waveform. (Note 1, Note 2, Fig. 1) Peak Pulse Current on 10/1000 s waveform. (Note 1, Fig. 3) Steady State Power Dissipation at TL =75& , Lead lengths .375” (9.5mm). (Note 2, Fig. 5) Peak Forward Surge Current,8.3ms Single Half Sine-Wave Superimposed on Rated Load. (JEDEC Method) (Note 3, Fig. 6) Operating junction and Storage Temperature Range. SYMBOL VALUE UNIT PPPM Minimum 5,000 Watts IPPM See Table Amps PM(AV) 6.5 Watts IFSM 300 Amps TJ , TSTG -65 to +150 & Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25& Ser Fig. 2. Ng. 2. Mounted on x 8.0mm Copper PadsPads to each . 2. Mounted on8.0mm 8.0mm x 8.0mm Copper to terminal. each terminal. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minute maximum. maximum. 3.es All specifications are subject to change without notice. 1 Rev 7 60'- Transient Voltage Suppressors Series MERITEK PACKAGE DIMENSIONS t Cathode Band s D1 D d T1 T L SMC/DO-214AB Millimeters Item Inches Min. Max. Min. Max. L 6.60 7.11 0.260 0.280 D 5.59 6.22 0.220 0.245 D1 2.90 3.20 0.114 0.126 T 7.75 8.13 0.305 0.320 T1 0.76 1.52 0.030 0.060 d - 0.203 - 0.008 s 2.06 2.62 0.079 0.103 t 0.152 0.305 0.006 0.012 SPECIFICATIONS Part Number UNI-POLAR BI-POLAR Maximum Reverse Breakdown Breakdown Peak Reverse Device Test Clamping Stand-Off Voltage Voltage Pulse Leakage Marking Code Current Voltage Voltage @IT Current @VRWM @IT @IPP UNI BI VRWM(V) VBR MIN.(V) VBR MAX.(V) IT(mA) VC(V) IPP(A) IR(µA) 5.0SMDJ11A 5.0SMDJ11CA 5PEN 5BEN 11.0 12.20 13.50 10 18.2 275.00 800 5.0SMDJ12A 5.0SMDJ12CA 5PEP 5BEP 12.0 13.30 14.70 10 19.9 252.00 800 5.0SMDJ13A 5.0SMDJ13CA 5PEQ 5BEQ 13.0 14.40 15.90 10 21.5 233.00 500 5.0SMDJ14A 5.0SMDJ14CA 5PER 5BER 14.0 15.60 17.20 10 23.2 216.00 200 5.0SMDJ15A 5.0SMDJ15CA 5PES 5BES 15.0 16.70 18.50 1 24.4 205.00 100 5.0SMDJ16A 5.0SMDJ16CA 5PET 5BET 16.0 17.80 19.70 1 26.0 193.00 50 5.0SMDJ17A 5.0SMDJ17CA 5PEU 5BEU 17.0 18.90 20.90 1 27.6 181.00 20 5.0SMDJ18A 5.0SMDJ18CA 5PEV 5BEV 18.0 20.00 22.10 1 29.2 172.00 10 5.0SMDJ20A 5.0SMDJ20CA 5PEW 5BEW 20.0 22.20 24.50 1 32.4 155.00 5 5.0SMDJ22A 5.0SMDJ22CA 5PEX 5BEX 22.0 24.40 26.90 1 35.5 141.00 5 5.0SMDJ24A 5.0SMDJ24CA 5PEZ 5BEZ 24.0 26.70 29.50 1 38.9 129.00 5 5.0SMDJ26A 5.0SMDJ26CA 5PFE 5BFE 26.0 28.90 31.90 1 42.1 119.00 5 2 Rev 7 60'- Transient Voltage Suppressors Series MERITEK Part Number UNI-POLAR BI-POLAR Maximum Reverse Breakdown Breakdown Peak Reverse Device Test Clamping Stand-Off Voltage Voltage Pulse Leakage Marking Code Current Voltage Voltage @IT @IT Current @VRWM @IPP UNI BI VRWM(V) VBR MIN.(V) VBR MAX.(V) IT(mA) VC(V) IPP(A) IR(µA) 5.0SMDJ28A 5.0SMDJ28CA 5PFG 5BFG 28.0 31.10 34.40 1 45.4 110.00 5 5.0SMDJ30A 5.0SMDJ30CA 5PFK 5BFK 30.0 33.30 36.80 1 48.4 103.00 5 5.0SMDJ33A 5.0SMDJ33CA 5PFM 5BFM 33.0 36.70 40.60 1 53.3 93.90 5 5.0SMDJ36A 5.0SMDJ36CA 5PFP 5BFP 36.0 40.00 44.20 1 58.1 86.10 5 5.0SMDJ40A 5.0SMDJ40CA 5PFR 5BFR 40.0 44.40 49.10 1 64.5 77.60 5 5.0SMDJ43A 5.0SMDJ43CA 5PFT 5BFT 43.0 47.80 52.80 1 69.4 72.10 5 5.0SMDJ45A 5.0SMDJ45CA 5PFV 5BFV 45.0 50.00 55.30 1 72.7 68.80 5 5.0SMDJ48A 5PFX 48.0 53.30 58.90 1 77.4 64.70 5 5.0SMDJ51A 5PFZ 51.0 56.70 62.70 1 82.4 60.70 5 5.0SMDJ54A 5RGE 54.0 60.00 66.30 1 87.1 57.50 5 5.0SMDJ58A 5PGG 58.0 64.40 71.20 1 93.6 53.50 5 5.0SMDJ60A 5PGK 60.0 66.70 73.70 1 96.8 51.70 5 5.0SMDJ64A 5PGM 64.0 71.10 78.60 1 103.0 48.60 5 5.0SMDJ70A 5PGP 70.0 77.80 86.00 1 113.0 44.30 5 5.0SMDJ75A 5PGR 75.0 83.30 92.10 1 121.0 41.40 5 5.0SMDJ78A 5PGT 78.0 86.70 95.80 1 126.0 39.70 5 5.0SMDJ85A 5PGV 85.0 94.40 104.00 1 137.0 36.50 5 5.0SMDJ90A 5PGX 90.0 100.00 111.00 1 146.0 34.30 5 5.0SMDJ100A 5PGZ 100.0 111.00 123.00 1 162.0 30.90 5 5.0SMDJ110A 5PHE 110.0 122.00 135.00 1 177.0 28.30 5 5.0SMDJ120A 5PHG 120.0 133.00 147.00 1 193.0 26.00 5 5.0SMDJ130A 5PHK 130.0 144.00 159.00 1 209.0 24.00 5 5.0SMDJ150A 5PHM 150.0 167.00 185.00 1 243.0 20.60 5 5.0SMDJ160A 5PHP 160.0 178.00 197.00 1 259.0 19.30 5 5.0SMDJ170A 5PHR 170.0 189.00 209.00 1 275.0 18.20 5 Note: For Bidirectional type having VRWM of 10 volts and less, the IR limit doubles. 3 Rev 7 60'- Transient Voltage Suppressors Series MERITEK (TA: 25°C UNLESS OTHERWISE SPECIFIED) RATING AND CHARACTERISTIC CURVES Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % P PPM -Peak Pulse Power (KW) 1000 100 10 1 0.1 100 80 60 40 20 0 0.000001 0.0000001 0.00001 0.0001 0 0.001 25 Figure 3 - Pulse Waveform 100 125 150 175 100000 tr=10µsec T J =25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of PPM I Peak Value IPPM 100 Half Value IPPM IPPM ( 50 2 Bi-directional V= OV 10000 Cj (pF) IPPM - Peak Pulse Current, %RSMI 75 Figure 4 - Typical Junction Capacitance 150 ) Uni-directional V= OV 1000 Uni-directional @ VR 100 10/1000µsec. Waveform as defined by R.E.A Bi-directional @ VR 10 td 0 1.0 0 2.0 3.0 1 1.0 4.0 10.0 100.0 1000.0 VBR - Reverse Breakdown Voltage (V) t-Time (ms) Figure 6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Only Figure 5 - Steady State Power Dissipation Derating Curve 6.5 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 350 IFSM - Peak Forward Surge Current (A) PM(AV), Steady State Power Dissipation (W) 50 TA - Ambient Temperature (ºC) td -Pulse Width (Sec.) 0 25 50 75 100 125 150 300 250 200 150 100 50 0 175 TA-Ambient Temperature (ºC) 1 10 100 Number of Cycles at 60 Hz 4 Rev 7