0KPA Transient Voltage Suppressors Series MERITEK UL E223045 FEATURES Plastic package. Glass passivated junction. 30,000W Peak Pulse Power capability on 10/1000µs waveform. Excellent clamping capability. Repetition rate (duty cycle): 0.05%. Low incremental surge resistance. Fast response time: typically less than 1.0ps from 0 volt to BV. High temperature soldering guaranteed: 265°C/10 seconds/.375", P600 6 (9.5mm) lead length, 5lbs., (2.3kg) tension. MM ECHANICAL DATA Case: Molded plastic over glass passivated junction. Terminals: Plated Axial leads, solderable per MIL-STD-750, Method 2026. Polarity: Color band denotes cathode except Bipolar. Mounting Position: Any. Weight: 0.07 ounce, 2.3 grams. DD EVICES FOR BIPOLAR APPLICATION For Bidirectional use C or CA suffix for type 30KPA30 through type 30KPA288 (e.g. 30KPA30C, 30KPA288CA); Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS M Ratings at 25°C ambient temperature unless otherwise specified. RATING Peak Pulse Power Dissipation on 10/1000 s waveform. (Note 1, Fig. 1) Peak Pulse Current on 10/1000 s waveform. (Note 1, Fig. 3) Steady State Power Dissipation at TL =75°C , Lead length .375” (9.5mm). (Fig. 5) Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load. (JEDEC Method) (Note 2, Fig. 6) Operating junction and Storage Temperature Range. SYMBOL VALUE UNIT PPPM Minimum 0000 30,000 Watts IPPM See Table Amps PM(AV) 8.0 Watts IFSM 400 Amps TJ , TSTG -55 to +175 °C Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2. 22. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minute maximum. All specifications are subject to change without notice. 1 Rev 7 0KPA Transient Voltage Suppressors Series MERITEK PACKAGE DIMENSIONS d s DIA. DIA. L T L P600 Millimeters Item Inches Min. Max. Min. Max. L 25.40 - 1.000 - T 8.60 9.10 0.340 0.360 d 8.60 9.10 0.340 0.360 s 1.22 1.32 0.048 0.052 SPECIFICATIONS Part Number Reverse Stand-Off Voltage Breakdown Voltage MIN.@IT Test Current Maximum Clamping Voltage @IPP Peak Pulse Current Reverse Leakage @ VRWM UNI-POLAR BI-POLAR VRWM(V) VBR MIN (V) IT(mA) VC(V) IPP(A) IR(ȝA) 30KPA28A 30KPA28CA 28.0 31.28 50 50.0 606.0 5000 30KPA30A 30KPA30CA 30.0 33.51 50 55.2 548.9 5000 30KPA33A 30KPA33CA 33.0 36.90 50 58.5 517.9 5000 30KPA36A 30KPA36CA 36.0 40.20 50 61.8 490.3 5000 30KPA39A 30KPA39CA 39.0 43.60 20 67.2 450.9 2000 30KPA42A 30KPA42CA 42.0 46.90 10 72.0 420.8 1000 30KPA43A 30KPA43CA 43.0 48.00 10 73.0 415.1 1000 30KPA45A 30KPA45CA 45.0 50.30 5 77.4 391.5 250 30KPA48A 30KPA48CA 48.0 53.60 5 81.6 371.3 150 30KPA51A 30KPA51CA 51.0 57.00 5 86.4 350.7 50 30KPA54A 30KPA54CA 54.0 60.30 5 91.4 331.5 20 30KPA58A 30KPA58CA 58.0 64.80 5 92.4 327.9 20 2 Rev 7 0KPA 0KPA rTransient Voltage Suppressors Series Series MERITEK E Part Number Reverse Stand-Off Voltage Breakdown Voltage MIN.@IT Test Current Maximum Clamping Voltage @IPP Peak Pulse Current Reverse Leakage @ VRWM UNI-POLAR BI-POLAR VRWM(V) VBR MIN (V) IT(mA) VC(V) IPP(A) IR(ȝA) 30KPA60A 30KPA60CA 60.0 67.00 5 102.0 297.1 15 30KPA64A 30KPA64CA 64.0 71.50 5 104.0 291.3 10 30KPA66A 30KPA66CA 66.0 73.70 5 107.0 283.2 2 30KPA70A 30KPA70CA 70.0 78.20 5 109.0 278.0 2 30KPA71A 30KPA71CA 71.0 79.30 5 111.5 271.7 2 30KPA72A 30KPA72CA 72.0 80.40 5 114.0 265.8 2 30KPA75A 30KPA75CA 75.0 83.80 5 119.4 253.8 2 30KPA78A 30KPA78CA 78.0 87.10 5 129.0 234.9 2 30KPA84A 30KPA84CA 84.0 93.80 5 139.2 217.7 2 30KPA90A 30KPA90CA 90.0 100.50 5 146.4 207.0 2 30KPA96A 30KPA96CA 96.0 107.20 5 156.0 194.2 2 30KPA102A 30KPA102CA 102.0 113.90 5 165.6 183.0 2 30KPA108A 30KPA108CA 108.0 120.60 5 175.2 172.9 2 30KPA120A 30KPA120CA 120.0 134.00 5 194.4 155.9 2 30KPA132A 30KPA132CA 132.0 147.40 5 213.0 142.3 2 30KPA144A 30KPA144CA 144.0 160.80 5 223.2 135.8 2 30KPA150A 30KPA150CA 150.0 167.60 5 233.4 129.8 2 30KPA156A 30KPA156CA 156.0 174.30 5 245.0 123.7 2 30KPA160A 30KPA160CA 160.0 178.70 5 252.6 120.0 2 30KPA168A 30KPA168CA 168.0 187.70 5 272.4 111.2 2 30KPA170A 30KPA170CA 170.0 189.90 5 275.0 110.2 2 30KPA180A 30KPA180CA 180.0 201.10 5 290.4 104.3 2 30KPA198A 30KPA198CA 198.0 221.20 5 319.8 94.7 2 30KPA216A 30KPA216CA 216.0 241.30 5 348.6 86.9 2 30KPA240A 30KPA240CA 240.0 268.10 5 387.0 78.3 2 30KPA258A 30KPA258CA 258.0 288.20 5 416.4 72.8 2 30KPA260A 30KPA260CA 260.0 290.40 5 416.0 72.8 2 30KPA270A 30KPA270CA 270.0 301.60 5 436.2 69.5 2 30KPA280A 30KPA280CA 280.0 312.80 5 464.0 65.3 2 30KPA288A 30KPA288CA 288.0 321.70 5 469.9 64.5 2 Note: For Bidirectional type having VRWM of 10 volts and less, the IR limit doubles. 3 Rev 7 0KPA Transient Voltage Suppressors RATING AND CHARACTERISTIC CURVES MERITEK (TA: 25°C UNLESS OTHERWISE SPECIFIED) Figure 1 - Peak Pulse Power Rating Curve Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve 100 Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 1000 Pppm-Peak Pulse Po wer (KW) Series 100 10 1 0.1 0.000001 0.00001 0.0001 80 60 40 20 0 0 0.001 25 50 75 100 125 150 175 200 TA-Ambient temperature (ºC) td-Pulse Width (Sec.) Figure 3 - Pulse Waveform Figure 3 - Pulse Waveform Figure 4 - Typical Junction Capacitance tr=10µsec T J =25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of PPM I Peak Value IPPM 100 Half Value IPPM IPPM ( 50 2 Bi-directional V= OV Cj, Junction Capacitance (pf) IPPM - Peak Pulse Current, %RSMI 150 ) 10/1000µsec. Waveform as defined by R.E.A 10000 td 0 Uni-directional @ VR 100 2.0 3.0 Bi-directional @ VR Tj=25C f=1.0MHz Vsig=50mVp-p 1 1.0 0 Uni-directional V= OV 0 4.0 t-Time (ms) 9 450 8 IFSM, Peak Forward Surge Current (A) Steady State Power Dissipation (W) 300 Figure 6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Only Figure 5 - Steady State Power Dissipation Derating Curve 7 6 5 4 3 L L 2 1 0 50 100 150 200 250 VBR - Reverse Breakdown Voltage (V) 0 25 50 75 100 125 150 175 200 TL- Lead Temperature (ºC) 400 350 300 250 200 150 100 50 0 1 10 100 Number of Cycles at 60 Hz 4 Rev 7