Noise Suppression Products/EMI Suppression Filters > Common Mode Choke Coil > Film Type Data Sheet 1 Common Mode Choke Coil Film Type DLP0NS Series (03025 Size) c Dimensions c Equivalent Circuit 0.45±0.05 0.27±0.1 0.5±0.1 (2) (3) (4) (2) (4) (3) 0.85±0.05 (1) (1) 0.20+0.05 –0.10 No polarity. 0.65±0.05 : Electrode (in mm) c Impedance-Frequency Characteristics (Main Items) c Impedance-Frequency Characteristics (Main Items) DLP0NSC/DLP0NSN Series DLP0NSA Series 10000 1000 Common mode Common mode DLP0NSN121HL2 1000 100 DLP0NSA150HL2 Impedance (Ω) Impedance (Ω) DLP0NSN900HL2 DLP0NSN670HL2 DLP0NSN350HL2 100 DLP0NSC280HL2 DLP0NSN121HL2 10 DLP0NSA150HL2 DLP0NSA070HL2 DLP0NSN900HL2 10 DLP0NSA070HL2 1 DLP0NSN670HL2 Differential mode DLP0NSN350HL2 DLP0NSC280HL2 1 1 10 100 Frequency (MHz) Differential mode 1000 0.1 10000 c Differential Mode Transmission Characteristics (Typ.) 1 10 1000 10000 c Differential Mode Transmission Characteristics (Typ.) DLP0NSC Series DLP0NSN Series 0 0 2 2 DLP0NSN280HL2 DLP0NSN350HL2 DLP0NSN670HL2 DLP0NSN900HL2 DLP0NSN121HL2 Insertion Loss (dB) DLP0NSC280HL2 Insertion Loss (dB) 100 Frequency (MHz) 4 6 8 4 6 8 10 10 1 10 100 Frequency (MHz) 1000 10000 1 10 100 Frequency (MHz) 1000 10000 Continued on the following page. oThis data sheet is applied for CHIP COMMON MODE CHOKE COIL used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.11.8 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > Common Mode Choke Coil > Film Type Data Sheet 2 Continued from the preceding page. c Differential Mode Transmission Characteristics (Typ.) DLP0NSA Series 0 2 c Packaging Code Packaging Minimum Quantity L 180mm Embossed Tape 10000 B Bulk(Bag) 500 DLP0NSA070HL2 Insertion Loss (dB) DLP0NSA150HL2 4 6 8 10 1 10 100 Frequency (MHz) 1000 10000 c Rated Value (p: packaging code) Part Number Operating Common Mode Impedance Rated Current Rated Voltage Insulation Resistance (min.) Withstand Voltage DC Resistance Temperature Range (at 100MHz/20°C) DLP0NSC280HL2p 28ohm ±20% 100mA 5Vdc 100M ohm 12.5Vdc 1.3ohm±25% -40 to +85°C DLP0NSN350HL2p 35ohm ±10ohm 100mA 5Vdc 100M ohm 12.5Vdc 1.2ohm±25% -40 to +85°C DLP0NSN670HL2p 67ohm ±20% 110mA 5Vdc 100M ohm 12.5Vdc 2.4ohm±25% -40 to +85°C DLP0NSN900HL2p 90ohm ±20% 100mA 5Vdc 100M ohm 12.5Vdc 3.0ohm±25% -40 to +85°C DLP0NSN121HL2p 120ohm ±20% 90mA 5Vdc 100M ohm 12.5Vdc 3.8ohm±25% -40 to +85°C DLP0NSA070HL2p 7ohm ±2ohm 100mA 5Vdc 100M ohm 12.5Vdc 0.6ohm±25% -40 to +85°C DLP0NSA150HL2p 15ohm ±5ohm 100mA 5Vdc 100M ohm 12.5Vdc 0.95ohm±25% -40 to +85°C Number of Circuit: 1 c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP COMMON MODE CHOKE COIL used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.11.8 http://www.murata.com/