Noise Suppression Products/EMI Suppression Filters > Block Type EMIFILr (LC Combined) > SMD Type Data Sheet 1 Block Type EMIFILr (LC Combined) SMD Type BNX02* Series ■ Dimensions ■ Insertion Loss Characteristics (Main Items) 12.1±0.2 20 (4) 1.05±0.2 1.6±0.3 0.3±0.1 (3) (4) 7.0±0.2 1.55±0.2 1.3±0.2 (2.45) (1) (2) (4) 1.0±0.3 60 80 100 0.1 : Electrode 2.5±0.2 1.55±0.2 (4) 10 Frequency (MHz) 100 1000 ■ Packaging L1 Code Packaging Minimum Quantity L 180mm Embossed Tape 400 K 330mm Embossed Tape 1500 B Bulk(Bag) 100 L3 C2 B L2 1 (in mm) ■ Equivalent Circuit (1) BNX022-01 BNX023-01 40 (2) 0.3±0.1 (1) 4.2±0.3 (3) (4) Insertion Loss (dB) BNX022 3.1±0.2 (3) 0 (2) 9.1±0.2 (1) CB (2) C1 CG (4) (3) PSG (1)-(4): Terminal Number PSG: Power Supply Ground CG: Circuit Ground CB: Circuit+B ■ Rated Value (p: packaging code) Part Number Rated Voltage Withstand Voltage Rated Current Insulation Resistance(min.) Insertion Loss BNX022-01p 50Vdc 125Vdc 10A 500M ohm 1MHz to 1GHz:35dB min. (20 to 25 degrees C line impedance=50 ohm) BNX023-01p 100Vdc 250Vdc 15A 500M ohm 1MHz to 1GHz:35dB min. (20 to 25 degrees C line impedance=50 ohm) Operating Temperature Range: -40°C to +125°C In operating temperatures exceeding +85°C, derating of current is necessary. Continued on the following page. o This data sheet is applied for Block Type EMIFILr used for General Electronics equipment for your design. ! Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2009.5.1 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > Block Type EMIFILr (LC Combined) > SMD Type Data Sheet 2 Continued from the preceding page. ■ Derating of Rated current In operating temperatures exceeding +85°C, derating of current is necessary for BNX022 series. Please apply the derating curve shown in chart according to the operating temperature. Derated Current (A) Derating 10 1 0 -40 85 125 Operating Temperature (°C) ■ Derating of Rated current In operating temperatures exceeding +85°C, derating of current is necessary for BNX023 series. Please apply the derating curve shown in chart according to the operating temperature. Derating Derated Current (A) 15 1 0 -40 85 125 Operating Temperature (°C) ■ !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. o This data sheet is applied for Block Type EMIFILr used for General Electronics equipment for your design. ! Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2009.5.1 http://www.murata.com/