KBL005 - KBL10 KBL005 - KBL10 Features • Ideal for printed circuit board . • Reliable low cost construction. • High surge current capability. • UL certified, UL #E96005. - ~~ + KBL Bridge Rectifiers Absolute Maximum Ratings* Symbol TA = 25°C unless otherwise noted Value Parameter 005 01 02 Units 04 06 08 10 VRRM Maximum Repetitive Reverse Voltage 50 100 200 400 600 800 1000 V VRMS Maximum RMS Bridge Input Voltage 35 70 140 280 420 560 700 V VR DC Reverse Voltage 50 100 200 400 600 800 1000 V IF(AV) Average Rectified Forward Current, @ TA = 50°C IFSM Non-repetitive Peak Forward Surge Current 8.3 ms Single Half-Sine-Wave Storage Temperature Range -55 to +150 °C Operating Junction Temperature -55 to +150 °C Tstg TJ (Rated VR) 4.0 A 200 A *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Thermal Characteristics Symbol Parameter Value Units PD Power Dissipation 6.58 W RθJA Thermal Resistance, Junction to Ambient,* per leg 19 °C/W RθJL Thermal Resistance, Junction to Lead,* per leg 2.4 °C/W *Device mounted on PCB with 0.375 " (9.5 mm) lead length and 0.5 x 0.5" (13 x 13 mm) copper pads. Electrical Characteristics Symbol TA = 25°C unless otherwise noted Device Units VF Forward Voltage, per bridge @ 4.0 A Parameter 1.1 V IR Reverse Current, total bridge @ rated VR TA = 25°C TA = 100°C 5.0 500 µA µA 2001 Fairchild Semiconductor Corporation KBL005-KBL10, Rev. C (continued) 200 100 0 1 10 100 Number of Cycles at 60Hz 1000 Figure 1. Non-Repetitive Surge Current Average Rectified Forward Current, IF [A] Peak Forward Surge Current, IFSM [A] Typical Characteristics 5 4 3 1 0 50 100 Ambient Temperature [ºC] 150 10 Reverse Current, IR [mA] Forward Current, IF [A] 0 Figure 2. Forward Current Derating Curve 10 1 0.1 TA J = 25º C µS Pulse Width = 300µ 200µ 2% Duty Cycle 0.01 0.4 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" 9.0 mm LEAD LENGTHS 2 0.6 0.8 1 1.2 Forward Voltage, VF [V] 1.4 1.6 Figure 3. Forward Voltage Characteristics 2001 Fairchild Semiconductor Corporation T A= 100º C 1 0.1 T A= 25º C 0.01 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage [%] Figure 4. Reverse Current vs Reverse Voltage KBL005-KBL10, Rev. C KBL005 - KBL10 Bridge Rectifiers TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DenseTrench™ DOME™ EcoSPARK™ E2CMOSTM EnSignaTM FACT™ FACT Quiet Series™ FAST FASTr™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench QFET™ QS™ QT Optoelectronics™ Quiet Series™ SILENT SWITCHER SMART START™ STAR*POWER™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™ UHC™ UltraFET VCX™ STAR*POWER is used under license DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. H4