Features Regulated Converters ● ● ● ● ● ● ● ● 4:1 Wide Input Voltage Range 8 Watts Regulated Output Power 1.6kVDC Isolation Over Current and Over Voltage Protection Five-Sided Shield No Derating to 74°C Standard DIP24 and SMD-Pinning Efficiency to 88% Selection Guide 24V and 48V Wide Input Types Part Number Input Range Output Voltage Output Current Input (4,5) Current Efficiency(6) Capacitive(7) Load max. DIP24 (SMD) VDC VDC mA mA % µF RP08-243.3SAW** 9-36 3.3 2400 40/407 85 1330 RP08-2405SAW** 9-36 5 1600 40/402 87 1330 RP08-2412SAW** 9-36 12 666 25/407 86 288 RP08-2415SAW** 9-36 15 533 25/407 86 200 RP08-483.3SAW** 18-75 3.3 2400 20/204 85 1330 RP08-4805SAW** 18-75 5 1600 20/201 87 1330 RP08-4812SAW** 18-75 12 666 13/201 87 288 RP08-4815SAW** 18-75 15 533 13/198 88 200 RP08-2405DAW** 9-36 ±5 ±800 20/417 84 ±900 RP08-2412DAW** 9-36 ±12 ±333 25/407 84 ±133 RP08-2415DAW** 9-36 ±15 ±267 25/407 86 ±90 RP08-4805DAW** 18-75 ±5 ±800 10/208 84 ±900 RP08-4812DAW** 18-75 ±12 ±333 13/203 85 ±133 RP08-4815DAW** 18-75 ±15 ±267 13/201 87 ±90 POWERLINE DC/DC-Converter RP08S_DAW Series 8 Watt DIP24 & SMD, Single & Dual Output UL-60950-1 Pending ** add Suffix SMD for SMD package Derating Graph (Ambient Temperature) RP08-4805SAW 125 100 Output Power (%) 75 50 75Vin Natural Convection Nom Vin Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at [email protected] 25 0 -40 -25 -10 0 50 60 70 80 90 100 110 78 Ambient Temperature Range (°C) Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range Input Filter Input Surge Voltage (100 ms max.) 24V nominal input 48V nominal input 24V Input 48V Input Input Reflected Ripple (nominal Vin and full load) 9-36VDC 18-75VDC Pi Type 50VDC 100VDC 20mAp-p continued on next page 216 14-February-2007 www.recom-international.com POWERLINE RP08-S_DAW Series DC/DC-Converter Specifications (typical at nominal input and 25°C unless otherwise noted) Start Up Time (nominal Vin and constant resistor load) Remote ON/OFF (see note 1) 450ms typ. Open or 3.0V < Vr < 12V Short or 0V < Vr < 1.2V 2.5mA DC-DC ON DC-DC OFF Nominal input Remote OFF input current Output Power 8W max. Output Voltage Accuracy (full Load and nominal Vin) ±1% Minimum Load 0% Line Regulation (low line, high line at full load) Load Regulation (0% to 100% full load) ±0.2% ±0.5% ±1% Single Dual Cross Regulation Dual Output (asymmetrical load 25%/100% full load) ±5% Ripple and Noise (20MHz bandwith) 50mVp-p Temperature Coefficient ±0.02%/°C max. Transient Response (25% load step change) Input Voltage Variation, dv/dt 250µs complies with ETS300 132, part 4.4 Over Load Protection (% of full load at nominal Vin) Overvoltage Protection (Single) Undervoltage Protection 150% typ 24V Input 48V Input Short Circuit Protection Zener Diode Clamp DC-DC ON = 9VDC, DC-DC OFF = 8VDC DC-DC ON = 18VDC, DC-DC OFF = 16VDC Continuous, automatic recovery Efficiency Isolation Voltage 5V/ms see „Selection Guide“ table In to Out and I/O to case 1600VDC min. Isolation Resistance 10 GΩ min. Isolation Capacitance 1500pF max. Operating Frequency Operating Temperature Range 5, 12, 15, ±12, ±15V 3.3, ±5V with derating 300kHz typ. -40°C to +78°C -40°C to +74°C -40°C to +105°C Maximum Case Temperature +105°C Storage Temperature Range -55°C to +125°C Thermal Impedance Natural convection 12°C/Watt Case Material Nickel-Coated copper Base Material Non-conductive black plastic Potting Material Weight Conducted Emissions (see note 3) Radiated Emissions (see note 3) ESD Radiated Immunity Fast Transient Surge Conducted Immunity Epoxy (UL94-V0) DIP SMD EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Thermal Shock MIL-STD-810D Vibration 10-55Hz, 2G, 30 Min. along X, Y and Z Relative Humidity MTBF (see note 2) www.recom-international.com 18g 20g Class A Class A Perf. Critera B Perf. Critera A Perf. Critera B Perf. Critera B Perf. Critera A 5% to 95% RH Bellcore-TR-NWT-000332 14-February-2007 2350 x 103 hours 217 RP08-S_DAW Series POWERLINE DC/DC-Converter Notes : 1. 2. 3. 4. 5. 6. 7. The ON/OFF control pin voltage is referenced to negative input. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). Requires external filter to meet EN55022 Class A Typical value at nominal input voltage and no load. Maximum value at nominal input voltage and full load Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistor load. Package Style and Pinning (mm) DIP24 Package Style 31.80 20.30 3rd angle projection 10.20 3.8 2 5.10 20.30 15.20 Pin Connections 2.54 Pin # Single 1 ON/OFF 2 -Vin 3 -Vin 9 NC 11 NC 14 +Vout 16 -Vout 22 +Vin 23 +Vin NC = No Connection 0.25 x 0.50 Rectangular Pin 1 2 3 9 11 16 14 Bottom View 23 22 Dual ON/OFF -Vin -Vin Com -Vout +Vout Com +Vin +Vin Pin Pitch Tolerance ±0.35 mm SMD Package Style 32.00 20.30 SMD Package Style 31.40 Same spec. as the original DIP spec. and pin definition, excl. of the SMD type pin. 11.20 2.54 10.90 3.81 21.30 6.35 Pin Connections 25.40 Pin area 0.1 x 0.50 2.54 0.50 1.60 2.40 9 10 11 12 1 2 3 4 5 23.40 Bottom View 26.54 Top View 24.14 24 23 22 21 20 11 x 2.54 218 16 15 14 13 1 Pin # Single 1 ON/OFF 2 -Vin 3 -Vin 9 NC 11 NC 14 +Vout 16 -Vout 22 +Vin 23 +Vin Others NC NC = No Connection Dual ON/OFF -Vin -Vin Com -Vout +Vout Com +Vin +Vin NC Pin Pitch Tolerance ±0.35 mm 27.94 14-February-2007 www.recom-international.com