GF1A-GF1M GF1A - GF1M Features • • • • Low forward voltage drop. High current capability. Easy pick and place. High surge current capability. SMA/DO-214AC COLOR BAND DENOTES CATHODE General Purpose Rectifiers (Glass Passivated) Absolute Maximum Ratings* Symbol TA = 25°C unless otherwise noted Parameter Value Units 1A 1B 1D 1G 1J 1K 1M 50 100 200 400 600 800 1000 VRRM Maximum Repetitive Reverse Voltage IF(AV) Average Rectified Forward Current, @ TL = 125°C Non-repetitive Peak Forward Surge Current 8.3 ms Single Half-Sine-Wave Storage Temperature Range 30 A -65 to +175 °C Operating Junction Temperature -65 to +175 °C Value Units IFSM Tstg TJ 1.0 V A *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Thermal Characteristics Symbol Parameter PD Power Dissipation 1.8 W RθJA Thermal Resistance, Junction to Ambient* 80 °C/W RθJL Thermal Resistance, Junction to Lead* 26 °C/W Device Units *Device mounted on PCB with 0.2 x 0.2" (5.0 x 5.0 mm) copper pad areas. Electrical Characteristics Symbol TA = 25°C unless otherwise noted Parameter 1A VF Forward Voltage @ 1.0 A trr Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A Reverse Current @ rated VR TA = 25°C TA = 125°C Total Capacitance VR = 4.0 V, f = 1.0 MHz IR CT 2001 Fairchild Semiconductor Corporation 1B 1D 1G 1.0 1J 1K 1M 1.2 V 2.0 µs 5.0 50 µA µA 15 pF GF1A-GF1M, Rev. G (continued) 1.6 1.4 1.2 1 RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED ON 0.2 x 0.2" (5.0 x 5.0 mm) COPPER PAD AREAS 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 Lead Temperature [ºC] 150 175 Peak Forward Surge Current, IFSM [A] Average Rectified Forward Current, IF [A] Typical Characteristics Figure 1. Forward Current Derating Curve 20 10 5 2 1 1 2 5 10 20 Number of Cycles at 60Hz 50 100 100 10 10 Reverse Current, IR [mA] Forward Current, IF [A] 50 Figure 2. Non-Repetitive Surge Current 100 1 0.1 0.01 0.4 100 TA = 25 º C µS Pulse Width = 300µ 2% Duty Cycle 0.6 0.8 1 1.2 1.4 1.6 Forward Voltage, VF [V] 1.8 2 Figure 3. Forward Voltage Characteristics TA = 125 º C 1 0.1 TA = 75º C 0.01 TA = 25º C 0.001 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage [%] Figure 4. Reverse Current vs Reverse Voltage 100 Total Capacitance, CT [pF] 50 20 10 5 2 1 0.01 0.1 1 10 Reverse Voltage, VR [V] 100 Figure 5. Total Capacitance 2001 Fairchild Semiconductor Corporation GF1A-GF1M, Rev. G GF1A-GF1M General Purpose Rectifiers (Glass Passivated) TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DenseTrench™ DOME™ EcoSPARK™ E2CMOSTM EnSignaTM FACT™ FACT Quiet Series™ FAST FASTr™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench QFET™ QS™ QT Optoelectronics™ Quiet Series™ SILENT SWITCHER SMART START™ STAR*POWER™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™ UHC™ UltraFET VCX™ STAR*POWER is used under license DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into support device or system whose failure to perform can the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system, or to affect its safety or with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. H4