SM12(G,J)48,USM12(G,J)48,SM12(G,J)48A,USM12(G,J)48A TOSHIBA BI-DIRECTIONAL TRIODE THYRISTOR SILICON PLANAR TYPE SM12G48,USM12G48,SM12J48,USM12J48 SM12G48A,USM12G48A,SM12J48A,USM12J48A AC POWER CONTROL APPLICATIONS l Repetitive Peak Off-State Voltage : VDRM=400, 600V l R.M.S. On-State Current : IT (RMS) =12A l Gate Trigger Current : IGT=30mA Max. : IGT=20mA Max. (“A”Type) Unit in mm SM12G48, SM12J48, SM12G48A, SM12J48A JEDEC JEITA TOSHIBA ― ― 13-10J1A USM12G48, USM12J48, USM12G48A, USM12J48A JEDEC JEITA TOSHIBA ― ― 13-10J2A Weight : 1.7g MARKING NUMBER *1 *2 SYMBOL TYPE MARK SM12G48, SM12G48A, USM12G48, USM12G48A SM12G48 SM12J48, SM12J48A, USM12J48, USM12J48A SM12J48 SM12G48A,SM12J48A,USM12G48A,USM12J48A A Example 8A : January 1998 8B : February 1998 8L : December 1998 *3 1 2001-07-13 SM12(G,J)48,USM12(G,J)48,SM12(G,J)48A,USM12(G,J)48A MAXIMUM RATINGS CHARACTERISTIC SYMBOL (U)SM12G48 (U)SM12G48A Repetitive Peak Off-State Voltage UNIT 400 V VDRM (U)SM12J48 (U)SM12J48A 600 R.M.S On-State Current IT (RMS) Peak One Cycle Surge On-State Current (Non-Repetitive) 2 Peak Gate Power Dissipation Average Gate Power Dissipation A A 132 (60Hz) 2 (Note 1) 12 120 (50Hz) ITSM I t Limit Value Critical Rate of Rise of On-State Current RATING 2 I t 72 A s di /dt 50 A / ms PGM 5 W PG (AV) 0.5 W Peak Forward Gate Voltage VGM 10 V Peak Forward Gate Current IGM 2 A Tj −40~125 °C Tstg −40~125 °C Junction Temperature Storage Temperature Range Note 1 : VDRM=0.5×Rated ITM≤15A tgw≥10ms tgr≤250ns igp=IGT×2.0 ELECTRICAL CHARACTERISTICS (Ta=25°C) CHARACTERISTIC SYMBOL MIN. TYP. MAX. UNIT ― ― 20 mA T2 (+) , Gate (+) ― ― 1.5 T2 (+) , Gate (-) ― ― 1.5 T2 (-) , Gate (-) ― ― 1.5 IV T2 (-) , Gate (+) ― ― ― I T2 (+) , Gate (+) ― ― 30 ― ― 30 Repetitive Peak Off-State Current IDRM TEST CONDITION VDRM=Rated I II Gate Trigger Voltage III SM12G48 SM12J48 Gate Trigger Current VD=12V RL=20W II T2 (+) , Gate (-) III T2 (-) , Gate (-) ― ― 30 IV T2 (-) , Gate (+) ― ― ― T2 (+) , Gate (+) ― ― 20 II T2 (+) , Gate (-) ― ― 20 III T2 (-) , Gate (-) ― ― 20 IV T2 (-) , Gate (+) ― ― ― I SM12G48A SM12J48A VGT IGT VD=12V RL=20W V mA Peak On-State Voltage VTM ITM=17A ― ― 1.5 V Gate Non-Trigger Voltage VGD VD=Rated, Tc=125°C 0.2 ― ― V VD=12V, ITM=1A ― ― 50 mA Rth (j-c) Junction to Case, AC ― ― 2.4 °C / W VDRM=Rated, Tj=125°C Exponential Rise ― 300 ― dv / dt ― 200 ― 10 ― ― Holding Current IH Thermal Resistance Critical Rate of Rise of Off-State Voltage Critical Rate of Rise of Off-State Voltage at Commutation (U)SM12G48 (U)SM12J48 (U)SM12G48A (U)SM12J48A (U)SM12G48 (U)SM12J48 (U)SM12G48A (U)SM12J48A (dv / dt) c VDRM=400V, Tj=125°C (di / dt) c=−6.5A / ms 2 V / ms V / ms 4 ― ― 2001-07-13 SM12(G,J)48,USM12(G,J)48,SM12(G,J)48A,USM12(G,J)48A 3 2001-07-13 SM12(G,J)48,USM12(G,J)48,SM12(G,J)48A,USM12(G,J)48A 4 2001-07-13 SM12(G,J)48,USM12(G,J)48,SM12(G,J)48A,USM12(G,J)48A RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 5 2001-07-13