GT40Q322 TOSHIBA Insulated Gate bipolar Transistor Silicon N Channel IGBT GT40Q322 Preliminary Voltage Resonance Inverter Switching Application • Enhancement-mode • High speed : tf = 0.14 µs (typ.) (IC = 40A) • FRD included between emitter and collector • The 4th generation • TO-3P(N) (Toshiba package name) Unit: mm Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-emitter voltage VCES 1200 V Gate-emitter voltage VGES ±25 V @ Tc = 100°C Continuous collector current @ Tc = 25°C Pulsed collector current Diode forward current IC 20 39 ICP 80 DC IF 10 Pulsed IFP 80 @ Tc = 100°C A A A 80 W 200 W Tj 150 °C Tstg −55 to 150 °C Characteristics Symbol Max Unit Thermal resistance (IGBT) Rth (j-c) 0.625 °C/W Thermal resistance (diode) Rth (j-c) 1.79 °C/W Collector power dissipation @ Tc = 25°C Junction temperature Storage temperature range PC JEDEC ― JEITA ― TOSHIBA 2-16C1C Weight: 4.6 g (typ.) Thermal Characteristics Equivalent Circuit Collector Gate Emitter 1 2003-07-07 GT40Q322 Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Gate leakage current IGES VGE = ±25 V, VCE = 0 ― ― ±500 nA Collector cut-off current ICES VCE = 1200 V, VGE = 0 ― ― 5.0 mA VGE (OFF) IC = 40 mA, VCE = 5 V 4.0 ― 7.0 V VCE (sat) IC = 40 A, VGE = 15 V ― 3.0 3.7 V VCE = 10 V, VGE = 0, f = 1 MHz ― 5550 ― pF Resistive Load ― 0.18 ― VCC = 600 V, IC = 40 A ― 0.26 ― VGG = ±15 V, RG = 39 Ω ― 0.14 0.21 ― 0.43 ― Gate-emitter cut-off voltage Collector-emitter saturation voltage Input capacitance Cies tr Rise time Switching time Turn-on time ton Fall time tf Turn-off time (Note 1) toff µs Diode forward voltage VF IF = 10 A, VGE = 0 ― ― 2.0 V Reverse recovery time trr IF = 10 A, di/dt = −20 A/µs ― 0.6 ― µs Note 1: Switching time measurement circuit and input/output waveforms VGE 90% 10% 0 RG RL IC 0 90% VCC 0 90% 10% VCE 10% td (off) tf toff 2 tr ton 2003-07-07 GT40Q322 RESTRICTIONS ON PRODUCT USE 030519EAA • The information contained herein is subject to change without notice. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. 3 2003-07-07