2SC982TM TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT process) (Darlington) 2SC982TM Printer Drive, Core Drive and LED Drive Applications Low Frequency Amplifier Applications · Unit: mm High DC current gain: hFE (1) = 5000 (min) (IC = 10 mA) : hFE (2) = 10000 (min) (IC = 100 mA) Equivalent Circuit Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO 40 V JEDEC TO-92 Collector-emitter voltage VCEO 40 V JEITA SC-43 Emitter-base voltage VEBO 10 V TOSHIBA 2-5F1B IC 300 ICP 500 Base current IB 10 mA Collector power dissipation PC 400 mW Junction temperature Tj 125 °C Tstg -55~125 °C DC Collector current mA Pulsed (Note) Storage temperature range Weight: 0.21 g (typ.) < 10 ms, duty cycle < Note: Pulse width = = 10% Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = 40 V, IE = 0 ¾ ¾ 0.1 mA Emitter cut-off current IEBO VEB = 8 V, IC = 0 ¾ ¾ 0.1 mA DC current gain Collector-emitter saturation voltage Base-emitter voltage hFE (1) VCE = 5 V, IC = 10 mA 5000 ¾ ¾ hFE (2) VCE = 2 V, IC = 100 mA 10000 ¾ ¾ IC = 300 mA, IB = 0.3 mA ¾ 0.9 1.3 V VCE = 2 V, IC = 100 mA ¾ 1.25 1.6 V VCE (sat) VBE 1 2003-03-25 2SC982TM 2 2003-03-25 2SC982TM RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 3 2003-03-25