2SC2532 TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT process) 2SC2532 Audio Frequency Amplifier Applications Driver Stage for LED Lamp Applications Temperature Compensation Applications · Unit: mm High hFE: hFE (1) = 5000 (min) (IC = 10 mA) hFE (2) = 10000 (min) (IC = 100 mA) Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO 40 V Collector-emitter voltage VCEO 40 V Emitter-base voltage VEBO 10 V Collector current IC 300 mA Base current IB 60 mA Collector power dissipation PC 150 mW Junction temperature Tj 125 °C Tstg -55~125 °C Storage temperature range JEDEC TO-236MOD JEITA SC-59 TOSHIBA 2-3F1A Weight: 0.012 g (typ.) Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = 40 V, IE = 0 ¾ ¾ 0.1 mA Emitter cut-off current IEBO VEB = 8 V, IC = 0 ¾ ¾ 0.1 mA DC current gain Collector-emitter saturation voltage Base-emitter voltage Marking hFE (1) VCE = 5 V, IC = 10 mA 5000 ¾ ¾ hFE (2) VCE = 2 V, IC = 100 mA 10000 ¾ ¾ IC = 300 mA, IB = 0.3 mA ¾ 0.9 1.3 V VCB = 2 V, IC = 100 mA ¾ 1.25 1.6 V VCE (sat) VBE Equivalent Circuit 1 2003-03-27 2SC2532 2 2003-03-27 2SC2532 RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 3 2003-03-27