152 RMH www.vishay.com Vishay BCcomponents Aluminum Capacitors Radial Miniature, High Voltage FEATURES 152 RMH low voltage • Long useful life: 3000 h to 4000 h at 105 °C • AEC-Q200 qualified • Miniaturized, ultra high CV-product per unit volume • High reliability • Polarized aluminum electrolytic capacitors, non-solid electrolyte • Radial leads, cylindrical aluminum case, insulated with a blue sleeve • Pressure relief • Charge and discharge proof • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 148 RUS Fig. 1 APPLICATIONS QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Category temperature range Endurance test at 105 °C Useful life at 105 °C: Case Ø D = 10 mm and 12.5 mm Case Ø D = 16 mm and 18 mm Useful life at 40 °C, 1.6 x IR applied: Case Ø D = 10 mm and 12.5 mm Case Ø D = 16 mm and 18 mm Shelf life at 0 V, 105 °C Based on sectional specification Climatic category IEC 60068 VALUE 10 x 12 to 18 x 35 1.5 μF to 220 μF ± 20 % 200 V to 450 V - 40 °C to + 105 °C 2000 h 3000 h 4000 h 200 000 h 260 000 h 1000 h IEC 60384-4/EN 130300 40/105/56 • Automotive • High-reliability and professional applications • Lighting, monitors, consumer electronics, industrial • Filtering of high voltages in power supplies general MARKING The capacitors are marked (where possible) with the following information: • Rated capacitance value (in μF) • Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) • Rated voltage (in V) • Date code, in accordance with IEC 60062 • Code indicating factory of origin • Name of manufacturer • Upper category temperature (105 °C) • Negative terminal identification • Series number (152) SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) CR (μF) 1.5 2.2 4.7 6.8 10 22 33 47 68 100 220 Revision: 09-Nov-12 UR (V) 200 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 35 250 10 x 16 12.5 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 25 - 400 10 x 12 10 x 16 10 x 12 10 x 16 10 x 20 12.5 x 25 16 x 20 16 x 20 16 x 25 16 x 35 18 x 35 - 450 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 20 16 x 25 18 x 20 16 x 35 18 x 25 18 x 35 - Document Number: 28320 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 152 RMH www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS 4+1 -0 L Ød + + F ØD F ØD - 5 min L Ød 15 min Fig. 2 - Form CA: Long leads Fig. 3 - Form CB: Cut leads Fig. 4 - Form TFA: Taped in box (ammopack) Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL CASE CODE Ød Ø Dmax. Lmax. F MASS (g) 10 x 12 14 0.6 10.5 13.5 5.0 ± 0.5 10 x 16 15 0.6 10.5 17.5 10 x 20 16 0.6 10.5 12.5 x 20 17 0.6 12.5 x 25 18 16 x 20 FORM CA FORM CB FORM TFA 1.6 1000 500 800 5.0 ± 0.5 1.9 500 500 800 22.0 5.0 ± 0.5 2.2 500 500 800 13.0 22.0 5.0 ± 0.5 4.0 500 500 500 0.6 13.0 27.0 5.0 ± 0.5 5.0 250 250 500 19a 0.8 16.5 22.0 7.5 ± 0.5 6.0 250 250 250 16 x 25 19 0.8 16.5 27.0 7.5 ± 0.5 8.0 250 250 250 16 x 35 21 0.8 16.5 37.5 7.5 ± 0.5 11.0 100 100 - 18 x 20 1820 0.8 18.5 22.0 7.5 ± 0.5 8.0 100 100 - 18 x 25 1825 0.8 18.5 27.0 7.5 ± 0.5 10.0 100 100 - 18 x 35 22 0.8 18.5 37.5 7.5 ± 0.5 14.5 100 100 - Note • For detailed tape dimensions please see www.vishay.com/doc?28360 Revision: 09-Nov-12 Document Number: 28320 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 152 RMH www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL Electrolytic capacitor 152 series DESCRIPTION CR Rated capacitance at 100 Hz, tolerance ± 20 % 4.7 μF/400 V; ± 20 % IR Rated RMS ripple current at 100 Hz, 105 °C Nominal case size: Ø 10 mm x 16 mm; form TFA Max. leakage current after 1 min at UR Ordering code: MAL215236478E3 Former 12NC: 2222 152 36478 IL1 tan Max. dissipation factor at 100 Hz Z Max. impedance at 10 kHz Note • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 200 250 400 450 CR 100 Hz (μF) NOMINAL CASE SIZE ØDxL (mm) IR 100 Hz 105 °C (mA) IL1 1 min (μA) tan 100 Hz 10 10 x 12 85 130 22 10 x 16 120 33 10 x 20 150 47 12.5 x 20 ORDERING CODE MAL2152 ....... Z 10 kHz () FORM CA FORM CB FORM TFA 0.12 6.3 52109E3 62109E3 32109E3 202 0.12 3.2 52229E3 62229E3 32229E3 268 0.12 2.3 52339E3 62339E3 32339E3 240 352 0.12 0.9 52479E3 62479E3 32479E3 BULK PACKAGING TAPED 68 12.5 x 25 310 478 0.12 0.6 52689E3 62689E3 32689E3 100 16 x 20 340 670 0.12 0.4 52101E3 62101E3 32101E3 220 16 x 35 630 1390 0.12 0.2 52221E3 62221E3 - 10 10 x 16 105 145 0.12 6.3 53109E3 63109E3 33109E3 22 12.5 x 20 180 235 0.12 2.3 53229E3 63229E3 33229E3 33 12.5 x 20 180 318 0.12 1.5 53339E3 63339E3 33339E3 47 12.5 x 25 310 423 0.12 0.9 53479E3 63479E3 33479E3 47 16 x 20 310 423 0.12 0.9 93475E3 93476E3 93473E3 100 16 x 25 340 820 0.12 0.4 53101E3 63101E3 33101E3 2.2 10 x 12 44 96 0.15 28.0 56228E3 66228E3 36228E3 4.7 10 x 12 48 127 0.15 24.0 96475E3 96476E3 96473E3 4.7 10 x 16 65 126 0.15 18.0 56478E3 66478E3 36478E3 6.8 10 x 16 65 152 0.15 12.0 56688E3 66688E3 36688E3 10 10 x 20 80 190 0.15 9.0 56109E3 66109E3 36109E3 22 12.5 x 25 150 334 0.15 3.8 56229E3 66229E3 36229E3 22 16 x 20 150 334 0.15 3.8 96225E3 96226E3 96223E3 33 16 x 20 190 466 0.15 2.6 56339E3 66339E3 36339E3 47 16 x 25 240 634 0.15 2.0 56479E3 66479E3 36479E3 68 16 x 35 310 886 0.15 1.7 56689E3 66689E3 - 100 18 x 35 380 1270 0.15 0.9 56101E3 66101E3 - 1.5 10 x 12 30 90 0.20 26.0 57158E3 67158E3 37158E3 2.2 10 x 16 50 99 0.20 26.0 57228E3 67228E3 37228E3 4.7 10 x 20 65 133 0.20 20.0 57478E3 67478E3 37478E3 6.8 12.5 x 20 80 162 0.20 16.0 57688E3 67688E3 37688E3 10 12.5 x 20 90 205 0.20 10.0 57109E3 67109E3 37109E3 22 16 x 25 150 367 0.20 4.6 57229E3 67229E3 37229E3 22 18 x 20 150 367 0.20 4.6 97225E3 97226E3 - 33 16 x 35 200 516 0.20 3.4 57339E3 67339E3 - 33 18 x 25 200 516 0.20 3.4 97335E3 97336E3 - 47 18 x 35 260 705 0.20 2.0 57479E3 67479E3 - Revision: 09-Nov-12 Document Number: 28320 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 152 RMH www.vishay.com Vishay BCcomponents ADDITIONAL ELECTRICAL DATA PARAMETER Voltage CONDITIONS VALUE UR = 200 V to 250 V UR = 400 V to 450 V Us 1.15 x UR Us 1.10 x UR Urev 1 V After 1 min at UR After 5 min at UR IL1 0.03 CR x UR + 70 μA IL5 0.015 CR x UR + 30 μA Case Ø D = 10 mm Case Ø D 12.5 mm Typ. 16 nH Typ. 18 nH Calculated from tan max. and CR (see Table 2) ESR = tan /2f CR Surge voltage Reverse voltage Current Leakage current Inductance Equivalent series inductance (ESL) Resistance Equivalent series resistance (ESR) MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) 50 100 300 1000 3000 10 000 100 000 IR MULTIPLIER UR 250 V 0.75 1.00 1.50 2.00 2.20 2.50 3.00 UR > 250 V 0.75 1.00 1.30 1.60 1.90 2.20 2.50 RIPPLE CURRENT AND USEFUL LIFE CCC206 3.8 IA 3.7 IR 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.8 Lifetime multiplier 2.6 0 1. 2.4 5 1. 0 2. 2.2 0 3. 0 4. 2.0 0 6. 0 8. 1.8 20 60 1.4 1.2 1.0 0.8 0.5 0.0 (1) 0 10 0 15 0 20 Useful life at 105 °C and IR applied Case Ø D = 10 mm and 12.5 mm: 3000 h Case Ø D = 16 mm and 18 mm: 4000 h 1.6 30 (1) 12 IA = Actual ripple current at 100 Hz IR = Rated ripple current at 100 Hz, 105 °C 40 50 60 70 80 90 100 110 Tamb (°C) Fig. 5 - Multiplier of useful life as a function of ambient temperature and ripple current load Revision: 09-Nov-12 Document Number: 28320 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 152 RMH www.vishay.com Vishay BCcomponents Table 4 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance REFERENCE IEC 60384-4/ EN 130300 subclause 4.13 PROCEDURE (quick reference) REQUIREMENTS Tamb = 105 °C; UR applied; 2000 h C/C: ± 20 % tan 2 x spec. limit Z 2 x spec. limit IL5 spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 105 °C; UR and IR applied; Case Ø D = 10 mm and 12.5 mm: 3000 h Case Ø D = 16 mm and 18 mm: 4000 h C/C: ± 50 % tan 3 x spec. limit Z 3 x spec. limit IL5 spec. limit no short or open circuit total failure percentage: 1 % Shelf life (storage at high temperature) IEC 60384-4/ EN 130300 subclause 4.17 Tamb = 105 °C; no voltage applied; 1000 h After test: UR to be applied for 30 min, 24 h to 48 h before measurement C/C: ± 20 % tan 2 x spec. limit Z 2 x spec. limit IL5 2 x spec. limit Reverse voltage IEC 60384-4/ EN 130300 subclause 4.15 Tamb = 105 °C: 125 h at U = - 1 V, followed by 125 h at UR C/C: ± 15 % IL5 spec. limit tan spec. limit Revision: 09-Nov-12 Document Number: 28320 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000