VLMO30.., VLMS30.., VLMY30.. Vishay Semiconductors Low Current SMD LED FEATURES • SMD LED with exceptional brightness • Compatible with automatic placement equipment • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 • Available in 8 mm tape • Low profile package • Non-diffused lens: excellent for coupling to light pipes and backlighting • Very low power consumption • Luminous intensity ratio in one packaging unit IVmax./IVmin. ≤ 1.6 • ESD withstand voltage: up to 2 kV according to JESD22-A114-B • Preconditioning: according to JEDEC level 2a • AEC-Q101 qualified • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for AllnGaP based low current SMD LEDs. The package of the VLM.30.. is the PLCC-2 package. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. PRODUCT GROUP AND PACKAGE DATA • Product group: LED • Package: SMD PLCC-2 • Product series: low current • Angle of half intensity: ± 60° APPLICATIONS • Automotive: backlighting in dashboards and switches • Telecommunication: indicator and backlighting in telephone and fax • Indicator and backlight for audio and video equipment • Indicator and backlight for battery driven equipment • Indicator and backlight in office equipment • Flat backlight for LCDs, switches and symbols • General use PARTS TABLE PART COLOR, LUMINOUS INTENSITY TECHNOLOGY VLMS3000-GS08 Super red, IV > 2.8 mcd AllnGaP VLMS3000-GS18 Super red, IV > 2.8 mcd AllnGaP VLMS30J1K2-GS08 Super red, IV = (4.5 to 11.2) mcd AllnGaP VLMS30J1K2-GS18 Super red, IV = (4.5 to 11.2) mcd AllnGaP VLMS30K1L2-GS08 Super red, IV = (7.1 to 18) mcd AllnGaP VLMS30K1L2-GS18 Super red, IV = (7.1 to 18) mcd AllnGaP Document Number 81322 Rev. 1.2, 01.-Dec-09 For technical support, please contact: [email protected] www.vishay.com 1 VLMO30.., VLMS30.., VLMY30.. Vishay Semiconductors PARTS TABLE COLOR, LUMINOUS INTENSITY TECHNOLOGY VLMS30J1L2-GS08 PART Super red, IV = (4.5 to 18) mcd AllnGaP VLMS30J1L2-GS18 Super red, IV = (4.5 to 18) mcd AllnGaP VLMS30J2K2-GS08 Super red, IV = (5.6 to 11.2) mcd AllnGaP VLMS30J2K2-GS18 Super red, IV = (5.6 to 11.2) mcd AllnGaP VLMS30K2L2-GS08 Super red, IV = (9 to 18) mcd AllnGaP VLMO3000-GS08 Orange, IV > 5.6 mcd AlInGaP VLMO3000-GS18 Orange, IV > 5.6 mcd AlInGaP VLMO30K1L2-GS08 Orange, IV = (7.1 to 18) mcd AlInGaP VLMO30K1L2-GS18 Orange, IV = (7.1 to 18) mcd AlInGaP VLMO30L1M2-GS08 Orange, IV = (11.2 to 28) mcd AlInGaP VLMO30L1M2-GS18 Orange, IV = (11.2 to 28) mcd AlInGaP VLMO30K1M2-GS08 Orange, IV = (7.1 to 28) mcd AlInGaP VLMO30K1M2-GS18 Orange, IV = (7.1 to 28) mcd AlInGaP VLMY3000-GS08 Yellow, IV > 4.5 mcd AlInGaP VLMY3000-GS18 Yellow, IV > 4.5 mcd AlInGaP VLMY3001GS08 Yellow, IV = (7.1 to 18) mcd AlInGaP VLMY3001-GS18 Yellow, IV = (7.1 to 18) mcd AlInGaP VLMY30J2L1-GS08 Yellow, IV = (5.6 to 14) mcd AlInGaP VLMY30J2L1-GS18 Yellow, IV = (5.6 to 14) mcd AlInGaP VLMY30K2M1-GS08 Yellow, IV = (9 to 22.4) mcd AlInGaP VLMY30K2M1-GS18 Yellow, IV = (9 to 22.4) mcd AlInGaP VLMY30J2M1-GS08 Yellow, IV = (5.6 to 22.4) mcd AlInGaP VLMY30J2M1-GS18 Yellow, IV = (5.6 to 22.4) mcd AlInGaP ABSOLUTE MAXIMUM RATINGS 1) VLM30.. PARAMETER Reverse voltage TEST CONDITION 2) DC forward current Surge forward current tp ≤ 10 µs SYMBOL VALUE UNIT VR 6 V IF 15 mA IFSM 0.1 A mW Power dissipation PV 40 Junction temperature Tj 125 °C Operating temperature range Tamb - 40 to + 100 °C Storage temperature range Tstg - 40 to + 100 °C RthJA 400 K/W Thermal resistance junction/ Mounted on PC board ambient (pad size > 16 mm2) Note: 1) Tamb = 25 °C, unless otherwise specified 2) Driving the LED in reverse direction is suitable for short term application www.vishay.com 2 For technical support, please contact: [email protected] Document Number 81322 Rev. 1.2, 01.-Dec-09 VLMO30.., VLMS30.., VLMY30.. Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS 1) VLMS30.., RED PARAMETER Luminous intensity 2) TEST CONDITION PART SYMBOL MIN. IF = 2 mA VLMS3000 IV 2.8 TYP. MAX. UNIT IF = 10 mA VLMS3000 IV IF = 2 mA VLMS30J1K2 IV 4.5 11.2 mcd IF = 2 mA VLMS30K1L2 IV 7.1 18 mcd IF = 2 mA VLMS30J1L2 IV 4.5 18 mcd IF = 2 mA VLMS30J2K2 IV 5.6 11.2 mcd IF = 2 mA VLMS30K2L2 IV 9 18 mcd 624 mcd 20 mcd Dominant wavelength IF = 2 mA λd Peak wavelength IF = 2 mA λp 635 nm Angle of half intensity IF = 2 mA ϕ ± 60 deg Forward voltage IF = 2 mA VF Reverse voltage IR = 10 µA VR 636 1.8 6 2.2 15 nm V V Note: 1) Tamb = 25 °C, unless otherwise specified 2) In one packing unit IVmax./IVmin. ≤ 1.6 OPTICAL AND ELECTRICAL CHARACTERISTICS 1) VLMO30.., ORANGE PARAMETER Luminous intensity 2) TEST CONDITION PART SYMBOL MIN. IF = 2 mA VLMO3000 IV 5.6 TYP. MAX. UNIT IF = 10 mA VLMO3000 IV IF = 2 mA VLMO30K1L2 IV 7.1 18 mcd IF = 2 mA VLMO30L1M2 IV 11.2 28 mcd IF = 2 mA VLMO30K1M2 mcd 50 mcd IV 7.1 28 mcd Dominant wavelength IF = 2 mA λd 600 609 nm Peak wavelength IF = 2 mA λp 610 Angle of half intensity IF = 2 mA ϕ ± 60 Forward voltage IF = 2 mA VF 1.8 Reverse voltage IR = 10 µA VR 6 nm deg 2.2 15 V V Note: 1) T amb = 25 °C, unless otherwise specified 2) In one packing unit IVmax./IVmin. ≤ 1.6 OPTICAL AND ELECTRICAL CHARACTERISTICS 1) VLMY30.., YELLOW PARAMETER Luminous intensity 2) TEST CONDITION PART SYMBOL MIN. IF = 2 mA VLMY3000 IV 4.5 TYP. MAX. UNIT IF = 10 mA VLMY3000 IV IF = 10 mA VLMY3001 IV 7.1 18 mcd IF = 2 mA VLMY30J2L1 IV 5.6 14 mcd IF = 2 mA VLMY30K2M1 IV 9 22.4 mcd IF = 2 mA VLMY30J2M1 IV 5.6 22.4 mcd 581 mcd 50 mcd Dominant wavelength IF = 2 mA λd Peak wavelength IF = 2 mA λp 585 nm Angle of half intensity IF = 2 mA ϕ ± 60 deg Forward voltage IF = 2 mA VF Reverse voltage IR = 10 µA VR 594 1.8 6 15 2.2 nm V V Note: 1) Tamb = 25 °C, unless otherwise specified 2) In one packing unit I Vmax./IVmin. ≤ 1.6 Document Number 81322 Rev. 1.2, 01.-Dec-09 For technical support, please contact: [email protected] www.vishay.com 3 VLMO30.., VLMS30.., VLMY30.. Vishay Semiconductors LUMINOUS INTENSITY CLASSIFICATION GROUP STANDARD LIGHT INTENSITY (mcd) OPTIONAL MIN. MAX. 1 2.8 3.55 H J K L M COLOR CLASSIFICATION 2 3.55 4.5 1 YELLOW ORANGE DOM. WAVELENGTH (nm) MIN. MAX. MIN. MAX. 581 584 1 4.5 5.6 2 583 586 600 603 2 5.6 7.1 3 585 588 602 605 1 7.1 9.0 4 587 590 604 607 2 9.0 11.2 5 589 592 606 609 1 11.2 14.0 6 591 594 2 14.0 18.0 1 18.0 22.4 2 22.4 28.0 GROUP Note: Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of ± 1 nm. Note: Luminous Intensity is tested at a current pulse duration of 25 ms and CROSSING TABLE an accuracy of ± 11 %. The above type numbers represent the order grous which include only a few brightness groups. Only one group VISHAY VLMO30K1L2 OSRAM LOT67K-K1L2 will be shipped in one reel (there will be no mixing of two groups on VLMO30K1M2 LOT67K-K1M2 each reel). In order to ensure availability, single brightness groups VLMO30L1M2 LOT67K-L1M2 will not be orderable. In a similar manner for colors where VLMS30J1K2 LST67K-J1K2 wavelength groups are measured and binned, single wavelength VLMS30J1L2 LST67K-J1L2 groups will be shipped in any one reel. In order to ensure availability, VLMS30K1L2 LST67K-K1L2 single wavelength groups will not be orderable. VLMY30J2L1 LYT67K-J2L1 VLMY30J2M1 LYT67K-J2M1 VLMY30K2M1 LYT67K-K2M1 TYPICAL CHARACTERISTICS Tamb = 25 °C, unless otherwise specified 1000 25 IF - Forward Current (mA) IF - Forward Current (mA) tp/T= 0.01 20 15 10 5 18254 20 40 60 80 100 Tamb - Ambient Temperature (°C) Figure 1. Forward Current vs. Ambient Temperature www.vishay.com 4 0.05 17557 0.1 100 0.2 0.5 10 0.01 0 0 0.02 1 0.1 1 10 100 tp - Pulse Duration (ms) Figure 2. Forward Current vs. Pulse Length For technical support, please contact: [email protected] Document Number 81322 Rev. 1.2, 01.-Dec-09 VLMO30.., VLMS30.., VLMY30.. Vishay Semiconductors 0° 10° 20° 2.50 0.9 50° 0.8 60° 70° 0.7 80° IV rel - Relative Luminous Intensity 40° 1.0 ϕ - Angular Displacement IV rel - Relative Luminous Intensity 30° 2.00 orange 1.75 red 1.50 1.25 1.00 0.75 0.50 0.25 0 0.6 0.4 0.2 - 40 0 95 10319 18251 Figure 3. Rel. Luminous Intensity vs. Angular Displacement - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Figure 6. Rel. Luminous Intensity vs. Ambient Temperature 1.2 IV rel - Relative Luminous Intensity yellow 2.25 2.00 yellow orange VF rel - Forward Voltage (V) 1.0 red yellow 0.8 0.6 0.4 0.2 0.0 540 580 620 660 700 λ - Wavelength (nm) 18266 1.95 red 1.85 1.80 1.75 1.70 1.65 - 40 18252 Figure 4. Relative Intensity vs. Wavelength orange 1.90 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Figure 7. Forward Voltage vs. Ambient Temperature IF - Forward Current (mA) 100 10 1 1 95 10878 1.5 2 2.5 3 VF - Forward Voltage (V) Figure 5. Forward Current vs. Forward Voltage Document Number 81322 Rev. 1.2, 01.-Dec-09 For technical support, please contact: [email protected] www.vishay.com 5 VLMO30.., VLMS30.., VLMY30.. Vishay Semiconductors PACKAGE DIMENSIONS in millimeters technical drawings according to DIN specifications 0.9 1.75 ± 0.1 3.5 ± 0.2 Pin identification Mounting Pad Layout 4 A area covered with solder resist 2.6 (2.8) C 2.2 2.8 ± 0.15 1.2 4 1.6 (1.9) Ø 2.4 3 + 0.15 Drawing-No.: 6.541-5067.01-4 Issue: 5; 04.11.08 20541 www.vishay.com 6 For technical support, please contact: [email protected] Document Number 81322 Rev. 1.2, 01.-Dec-09 VLMO30.., VLMS30.., VLMY30.. Vishay Semiconductors METHOD OF TAPING/POLARITY AND TAPE AND REEL SMD LED (VLM.3 - SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 4.5 3.5 2.5 1.5 Adhesive tape 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity Blister tape 10.0 9.0 120° 14.4 max. 180 178 94 8665 Figure 9. Reel Dimensions - GS08 Component cavity 94 8670 REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED TAPING OF VLM.3... 2.2 2.0 3.5 3.1 4.5 3.5 5.75 5.25 3.6 3.4 4.0 3.6 8.3 7.7 1.85 1.65 1.6 1.4 4.1 3.9 4.1 3.9 0.25 2.05 1.95 94 8668 Figure 8. Tape Dimensions in mm for PLCC-2 Document Number 81322 Rev. 1.2, 01.-Dec-09 10.4 8.4 120° 2.5 1.5 13.00 12.75 62.5 60.0 Identification Label: Vishay type group tape code production code quantity 321 329 14.4 max. 18857 Figure 10. Reel Dimensions - GS18 For technical support, please contact: [email protected] www.vishay.com 7 VLMO30.., VLMS30.., VLMY30.. Vishay Semiconductors SOLDERING PROFILE BAR CODE PRODUCT LABEL EXAMPLE: IR Reflow Soldering Profile for Lead (Pb)-free Soldering 106 Preconditioning acc. to JEDEC Level 2a 300 A Temperature (°C) H max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 VISHAY 200 37 max. 30 s 150 max. 100 s max. 120 s 100 B C D E F G 20119 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 0 0 50 100 150 Time (s) 200 250 300 max. 2 cycles allowed 19885 Figure 11. Vishay Lead (Pb)-free Reflow Soldering Profile (acc. to J-STD-020) TTW Soldering (acc. to CECC00802) 300 5s Temperature (°C) 250 235 °C to 260 °C first wave 200 lead temperature second full line: typical wave dotted line: process limits A) Type of component B) Manufacturing plant C) SEL - selection code (bin): e.g.: K1 = code for luminous intensity group 3 = code for color group D) Date code year/week E) Day code (e.g. 5: Friday) F) Batch no. G) Total quantity H) Company code ca. 200 K/s 150 100 °C to 130 °C ca. 2 K/s 100 2 K/s ca. 5 K/s 50 forced cooling 0 0 948626-1 50 100 150 200 250 Time (s) Figure 12. Double Wave Soldering of Opto Devices (all Packages) www.vishay.com 8 For technical support, please contact: [email protected] Document Number 81322 Rev. 1.2, 01.-Dec-09 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1