Hologram Unit HUL6273 For Car DVD Player Hologram Unit 3.95±0.15 Apparent emitting point (3.0) 8 7 6 5 4 3 2 1 φ8.5 +0 -0.05 Therest of molding gate 0.1 max. ■ Applications • Car DVD player 12.2±0.3 Apparent emitting point 0.25±0.05 Lead frame Reference plane 1.33±0.2 3.1±0.4 0.78±0.1 (at the root) (5.0) (0.52) • General-purpose optical design independent of objective lens • Applicable to high-speed 6 × readout • With the supplementary amplifier of the bipolarity built-in, the noise characteristic can be born highly • Thin (4.0 mm) package realizes thin and simple DVD pick-up (2.3) ■ Features 7×0.5±0.1=3.5±0.1 PKG center 9 10 11 12 13 14 15 16 3.95±0.15 (0.3) 8.8±0.2 0.3 max. For optical information processing (Readable × 6 speed) Reference plane Unit : mm Note) 1. Standard Corner R = 0.2 max. 2. Thickness of HOE = 2.5 mm, refractive index n = 1.52 LDHU06 Package ■ Absolute Maximum Ratings Symbol Rating Unit Radiant power Parameter PO 5 mW Reverse voltage VR(LD) 1.5 V Supply voltage VCC 6 V Reference voltage Vref +2.1 to +2.3 V Operating ambient temperature Topr −10 to +70 °C Storage temperature Tstg −40 to +85 °C Publication date: October 2003 SHH00006AED 1 HUL6273 ■ Block Diagram 1 9 16 LD 15 FE1 14 TE1 2 FE2 13 TE2 3 TE3 4 Imon 12 TE4 5 11 10 8 6 7 ■ Pin Descriptions Pin No. Description Pin No. Description 1 GND 9 GND 2 TE1 Signal out 10 Vref 3 TE2 Signal out 11 VCC 4 TE3 Signal out 12 Imon 5 TE4 Signal out 13 FE2 Signal out 6 REP Signal out 14 FE1 Signal out 7 RFN Signal out 15 LD(+) 8 GND 16 LD(−) ■ Electro-Optical Characteristics • Unit characteristic specifications TC = 25°C ± 3°C, VRF = VREP − VRFN Parameter Threshold current 2 Symbol Conditions Ith CW Operating current IOP CW, VRF = 1 V, VCC = 5 V Operating voltage VOP Min Typ Max Unit 15 25 40 mA 20 35 60 mA 1.9 2.3 2.7 V 658 668 678 nm 0.2 0.3 mW Oscillation wavelength λ Optical output from lens PO Focus error signal amplitude VFE 240 360 480 mV Focus error signal balance BFE −15 +15 % Radial optical flux balance RAB −20 0 +20 % Tangential optical flux balance TAB −20 0 +20 % Jitter Jitter 8.0 0 % VRF = 1 V, VCC = 5 V, Vref = 2.2 V SHH00006AED Caution for Safety ■ This product contains Gallium Arsenide (GaAs). DANGER GaAs powder and vapor are hazardous to human health if inhaled or ingested. Do not burn, destroy, cut, cleave off, or chemically dissolve the product. Follow related laws and ordinances for disposal. The product should be excluded form general industrial waste or household garbage. ■ Do not touch or look into the laser beam directly. The laser beam may cause injury to the eye or skin, or loss of eyesight. Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2003 SEP