www.fairchildsemi.com KA78LXXA/KA78L05AA 3-Terminal 0.1A Positive Voltage Regulator Features Description • Maximum Output Current of 100mA • Output Voltage of 5V, 6V, 8V, 9V,10V, 12V, 15V, 18V and 24V • Thermal Overload Protection • Short Circuit Current Limiting • Output Voltage Offered in ±5% Tolerance The KA78LXXA/KA78L05AA series of fixed voltage monolithic integrated circuit voltage regulators are suitable for application that required supply current up to 100mA. TO-92 SOT-89 GND 1 2 3 123 1. Output 2. GND 3. Input 8-SOP 8 1 1. Output 2. GND 3. GND 4. NC 5. NC 6. GND 7. GND 8. Input Internal Block Diagram VIt Inpu 3 THERMAL SHUTDOWN CIRCUIT I REFERENCE VOLTAGE + - SHORT CIRCUIT PROTECTION GND 2 RSC V0 Outpu t 1 Rev. 1.0.5 ©2005 Fairchild Semiconductor Corporation KA78LXXA/KA78L05AA Absolute Maximum Ratings Parameter Symbol Value Unit Input Voltage (for VO = 5V, 8V) (for VO = 12V to 18V) (for VO = 24V VI 30 35 40 V V V Operating Junction Temperature Range TJ 0 ~ +150 °C TSTG -65 ~ +150 °C Storage Temperature Range Electrical Characteristics(KA78L05A) (VI = 10V, IO = 40mA, 0°C ≤ TJ ≤ 125°C, CI = 0.33µF, CO = 0.1µF, unless otherwise specified. (Note1) Parameter Symbol Output Voltage VO Line Regulation (Note1) Load Regulation (Note1) ∆VO ∆VO Conditions TJ = 25°C TJ = 25°C TJ = 25°C Min. Typ. Max. Unit 4.8 5.0 5.2 V 7V ≤ VI ≤ 20V - 8 150 mV 8V ≤ VI ≤ 20V - 6 100 mV 1mA ≤ IO ≤ 100mA - 11 60 mV 1mA ≤ IO ≤ 40mA - 5.0 30 mV 7V ≤ VI ≤ 20V 1mA ≤ IO ≤ 40mA - - 5.25 V Output Voltage VO 7V ≤VI ≤ VMAX (Note2) 1mA ≤ IO ≤ 70mA 4.75 - 5.25 V Quiescent Current IQ TJ = 25°C - 2.0 5.5 mA - 1.5 mA Quiescent Current Change With Line ∆IQ 8V ≤VI ≤ 20V - With Load ∆IQ 1mA ≤ IO ≤ 40 mA - - 0.1 mA VN TA = 25°C, 10Hz ≤ f ≤ 100kHz - 40 - µV/Vo IO = 5mA - -0.65 - mV/°C 41 80 - dB - 1.7 - V Output Noise Voltage Temperature Coefficient of VO ∆VO/∆T Ripple Rejection RR f = 120Hz, 8V ≤ VI ≤ 18V, TJ = 25°C Dropout Voltage VD TJ = 25°C Note: 1. The maximum steady state usable output current and input voltage are very dependent on the heat sinking and/or lead length of the package. The data above represent pulse test conditions with junction temperature as indicated at the initiation of tests. 2. Power dissipation PD ≤ 0.75W. 2 KA78LXXA/KA78L05AA Electrical Characteristics(KA78L06A) (Continued) (VI = 12V, IO = 40mA, 0°C ≤ TJ ≤ 125°C, CI = 0.33µF, CO = 0.1µF, unless otherwise specified. (Note 1) Parameter Symbol Output Voltage Line Regulation (Note1) Load Regulation (Note1) VO TJ = 25°C ∆VO TJ = 25°C ∆VO Output Voltage VO Quiescent Current IQ Quiescent Current Change Conditions 8.5V ≤ VI ≤ 20V Min. Typ. Max. Unit 5.75 6.0 6.25 V - 64 175 mV 9V ≤ VI ≤ 20V - 54 125 mV 1mA ≤ IO ≤ 100mA - 12.8 80 mV 1mA ≤ IO ≤ 70mA - 5.8 40 mV 8.5 ≤ VI ≤ 20V, 1mA ≤ IO ≤ 40mA 5.7 - 6.3 V 8.5 ≤ VI ≤ VMAX(Note), 1mA ≤ IO ≤ 70mA 5.7 - 6.3 V TJ = 25°C TJ = 25°C - - 5.5 mA TJ = 125°C - 3.9 6.0 mA With Line ∆IQ 9 ≤ VI ≤ 20V - - 1.5 mA With Load ∆IQ 1mA ≤ IO ≤ 40mA - - 0.1 mA VN TA = 25°C, 10Hz ≤ f ≤ 100kHz - 40 - µV/Vo IO = 5mA - 0.75 - mV/°C 40 46 - dB - 1.7 - V Output Noise Voltage Temperature Coefficient of VO ∆VO/∆T Ripple Rejection RR f = 120Hz, 10V ≤ VI ≤ 20V, TJ = 25°C Dropout Voltage VD TJ = 25°C Note: 1. The maximum steady state usable output current and input voltage are very dependent on the heat sinking and/or lead length of the package. The data above represent pulse test conditions with junction temperature as indicated at the initiation of tests. 2. Power dissipation PD ≤ 0.75W. 3 KA78LXXA/KA78L05AA Electrical Characteristics(KA78L08A) (Continued) (VI = 14V, IO = 40mA, 0°C ≤ TJ ≤ 125°C, CI = 0.33µF, CO = 0.1µF, unless otherwise specified. (Note1) Parameter Symbol Output Voltage Line Regulation (Note1) Load Regulation (Note1) Conditions VO TJ = 25°C ∆VO TJ = 25°C ∆VO TJ = 25°C 10.5V ≤ VI ≤ 23V Min. Typ. Max. Unit 7.7 8.0 8.3 V - 10 175 mV 11V ≤ VI ≤ 23V - 8 125 mV 1mA ≤ IO ≤ 100mA - 15 80 mV 1mA ≤ IO ≤ 40mA - 8.0 40 mV 10.5V ≤ VI ≤ 23V 1mA ≤ IO ≤ 40mA 7.6 - 8.4 V Output Voltage VO 10.5V ≤ VI ≤ VMAX (Note2) 7.6 - 8.4 V Quiescent Current IQ TJ = 25°C - 2.0 5.5 mA Quiescent Current Change 1mA ≤ IO ≤ 70mA With Line ∆IQ 11V ≤ VI ≤ 23V - - 1.5 mA With Load ∆IQ 1mA ≤ IO ≤ 40mA - - 0.1 mA VN TA = 25°C, 10Hz ≤ f ≤100kHz - 60 - µV/Vo Output Noise Voltage Temperature Coefficient of VO ∆VO/∆T IO = 5mA Ripple Rejection RR f = 120Hz, 11V ≤ VI ≤ 21V, TJ = 25°C Dropout Voltage VD TJ = 25°C - -0.8 - mV/°C 39 70 - dB - 1.7 - V Note: 1. The maximum steady state usable output current and input voltage are very dependent on the heat sinking and/or lead length of the package. The data above represent pulse test conditions with junction temperature as indicated at the initiation of tests. 2. Power dissipation PD ≤ 0.75W. 4 KA78LXXA/KA78L05AA Electrical Characteristics(KA78L09A) (Continued) (VI = 15V, IO = 40mA, 0°C ≤ TJ ≤ 125°C, CI = 0.33µF, CO = 0.1µF, unless otherwise specified. (Note1) Parameter Symbol Output Voltage Line Regulation (Note1) Load Regulation (Note1) Conditions VO TJ = 25°C ∆VO TJ = 25°C ∆VO TJ = 25°C Min. Typ. Max. Unit 8.64 9.0 9.36 V - 90 200 mV 13V ≤ VI ≤ 24V - 100 150 mV 1mA ≤ IO ≤ 100mA - 20 90 mV 1mA ≤ IO ≤ 40mA - 10 45 mV 11.5V ≤ VI ≤ 24V 11.5V ≤ VI ≤ 24V 1mA ≤ IO ≤ 40mA 8.55 - 9.45 V Output Voltage VO 11.5V ≤ VI ≤ VMAX (Note 2) 8.55 - 9.45 V Quiescent Current IQ TJ = 25°C - 2.1 6.0 mA Quiescent Current Change 1mA ≤ IO ≤ 70mA With Line ∆IQ 13V ≤ VI ≤ 24V - - 1.5 mA With Load ∆IQ 1mA ≤ IO ≤ 40mA - - 0.1 mA VN TA = 25°C, 10Hz ≤ f ≤ 100kHz - 70 - µV/Vo Output Noise Voltage Temperature Coefficient of VO ∆VO/∆T IO = 5mA Ripple Rejection RR f = 120Hz, 12V ≤ VI ≤ 22V, TJ = 25°C Dropout Voltage VD TJ = 25°C - -0.9 - mV/°C 38 44 - dB - 1.7 - V Note: 1. The maximum steady state usable output current and input voltage are very dependent on the heat sinking and/or lead length of the package. The data above represent pulse test conditions with junction temperature as indicated at the initiation of tests. 2. Power dissipation PD ≤ 0.75W. 5 KA78LXXA/KA78L05AA Electrical Characteristics(KA78L10A) (Continued) (VI = 16V, IO = 40mA, 0 °C ≤ TJ ≤ 125 °C, CI = 0.33 µF, CO = 0.1µF, unless otherwise specified. (Note1) Parameter Symbol Output Voltage Line Regulation (Note1) Load Regulation (Note1) VO TJ = 25°C ∆VO TJ = 25°C ∆VO Output Voltage VO Quiescent Current IQ Quiescent Current Change Conditions Min. Typ. Max. Unit 9.6 10.0 10.4 V - 100 220 mV 14V ≤ VI ≤ 25V - 100 170 mV 1mA ≤ IO ≤ 100mA - 20 94 mV 1mA ≤ IO ≤ 70mA - 10 47 mV 12.5V ≤ VI ≤ 25V, 1mA ≤ IO ≤ 40mA 9.5 - 10.5 12.5V ≤ VI ≤ VMAX (Note2) 1mA ≤ IO ≤ 70mA 9.5 - 10.5 TJ = 25°C - - 6.0 TJ =125°C - 4.2 6.5 TJ = 25°C 12.5 ≤ VI ≤ 25V V mA With Line ∆IQ 12.5 ≤ VI ≤ 25V - - 1.5 mA With Load ∆IQ 1mA ≤ IO ≤ 40mA - - 0.1 mA VN TA = 25°C, 10Hz ≤ f ≤ 100kHz - 74 - µV/Vo IO = 5mA - 0.95 - mV/°C 38 43 - dB - 1.7 - V Output Noise Voltage Temperature Coefficient of VO ∆VO/∆T Ripple Rejection RR f = 120Hz, 15V ≤ VI ≤ 25V, TJ = 25°C Dropout Voltage VD TJ = 25°C Notes: 1. The maximum steady state usable output current and input voltage are very dependent on the heat sinking and/or lead length of the package. The data above represent pulse test conditions with junction temperature as indicated at the initiation of tests. 2. Power dissipation PD ≤ 0.75W. 6 KA78LXXA/KA78L05AA Electrical Characteristics(KA78L12A) (Continued) (VI = 19V, IO = 40mA, 0°C ≤ TJ ≤ 125°C, CI = 0.33 µF, CO = 0.1µF, unless otherwise specified. (Note 1) Parameter Symbol Output Voltage Line Regulation (Note1) Load Regulation (Note1) Conditions VO TJ = 25°C ∆VO TJ = 25°C ∆VO TJ = 25°C Min. Typ. Max. Unit 11.5 12 12.5 V 14.5V ≤ VI ≤ 27V - 20 250 mV 16V ≤ VI ≤ 27V - 15 200 mV 1mA ≤ IO ≤ 100mA - 20 100 mV 1mA ≤ IO ≤ 40mA - 10 50 mV 14.5V ≤ VI ≤ 27V 1mA ≤ IO ≤ 40mA 11.4 - 12.6 V Output Voltage VO 14.5V ≤ VI ≤ VMAX (Note 2) 11.4 - 12.6 V Quiescent Current IQ TJ = 25°C - 2.1 6.0 mA Quiescent Current Change 1mA ≤ IO ≤ 70mA With Line ∆IQ 16V ≤ VI ≤ 27V - - 1.5 mA With Load ∆IQ 1mA ≤ IO ≤ 40mA - - 0.1 mA VN TA = 25°C, 10Hz ≤ f ≤ 100kHz - 80 - µV/Vo Output Noise Voltage Temperature Coefficient of VO ∆VO/∆T IO = 5mA Ripple Rejection RR f = 120Hz, 15V ≤ VI ≤ 25V, TJ = 25°C Dropout Voltage VD TJ = 25°C - -1.0 - mV/°C 37 65 - dB - 1.7 - V Note: 1. The maximum steady state usable output current and input voltage are very dependent on the heat sinking and/or lead length of the package. The data above represent pulse test conditions with junction temperature as indicated at the initiation of tests. 2. Power dissipation PD ≤ 0.75W. 7 KA78LXXA/KA78L05AA Electrical Characteristics(KA78L15A) (Continued) (VI = 23V, IO = 40mA, 0°C ≤ TJ ≤ 125°C, CI = 0.33 µF, CO = 0.1µF, unless otherwise specified. (Note1) Parameter Symbol Output Voltage Line Regulation (Note1) Load Regulation (Note1) Output Voltage Quiescent Current Change VO TJ = 25°C ∆VO TJ = 25°C ∆VO VO Quiescent Current Conditions IQ 17.5V ≤ VI ≤ 30V Min. Typ. Max. Unit 14.4 15 15.6 V - 25 300 mV 20V ≤ VI ≤ 30V - 20 250 mV 1mA ≤ IO ≤ 100mA - 25 150 mV 1mA ≤ IO ≤ 40mA - 12 75 mV 17.5V ≤ VI ≤ 30V 1mA ≤ IO ≤ 40mA 14.2 5 - 15.7 5 V 17.5V ≤ VI ≤ VMAX (Note 2) 1mA ≤ IO ≤ 70mA 14.2 5 - 15.7 5 V TJ = 25°C - 2.1 6.0 mA TJ = 25°C With Line ∆IQ 20V ≤ VI ≤ 30V - - 1.5 mA With Load ∆IQ 1mA ≤ IO ≤ 40mA - - 0.1 mA VN TA = 25°C, 10Hz ≤ f ≤ 100kHz - 90 - µV/Vo IO = 5mA - -1.3 - mV/°C 34 60 - dB - 1.7 - V Output Noise Voltage Temperature Coefficient of VO ∆VO/∆T Ripple Rejection RR f = 120Hz, 18.5V ≤ VI ≤ 28.5V, TJ = 25°C Dropout Voltage VD TJ = 25°C Note: 1. The maximum steady state usable output current and input voltage are very dependent on the heat sinking and/or lead length of the package. The data above represent pulse test conditions with junction temperature as indicated at the initiation of tests. 2. Power dissipation PD ≤ 0.75W. 8 KA78LXXA/KA78L05AA Electrical Characteristics(KA78L18A) (Continued) (VI = 27V, IO = 40mA, 0°C ≤ TJ ≤ 125°C, CI = 0.33 µF, CO = 0.1µF, unless otherwise specified. (Note1) Parameter Symbol Output Voltage Line Regulation (Note1) Load Regulation (Note1) Conditions VO TJ = 25°C ∆VO TJ = 25°C ∆VO TJ = 25°C Min. Typ. Max. Unit 17.3 18 18.7 V 21V ≤ VI ≤ 33V - 145 300 mV 22V ≤ VI ≤ 33V - 135 250 mV 1mA ≤ IO≤100mA - 30 170 mV 1mA ≤ IO ≤ 40mA - 15 85 mV 21V ≤ VI ≤ 33V 1mA ≤ IO ≤ 40mA 17.1 - 18.9 V Output Voltage VO 21V ≤ VI ≤ VMAX (Note 2) 1mA ≤ IO ≤ 70mA 17.1 - 18.9 V Quiescent Current IQ TJ = 25°C - 2.2 6.0 mA Quiescent Current Change With Line ∆IQ 21V ≤ VI ≤ 33V - - 1.5 mA With Load ∆IQ 1mA ≤ IO ≤ 40mA - - 0.1 mA VN TA = 25°C, 10Hz ≤ f ≤ 100kHz - 150 - µV/Vo Output Noise Voltage Temperature Coefficient of VO ∆VO/∆T IO = 5mA Ripple Rejection RR f = 120Hz, 23V ≤ VI ≤ 33V, TJ = 25°C Dropout Voltage VD TJ = 25°C - -1.8 - mV/°C 34 48 - dB - 1.7 - V Note: 1. The maximum steady state usable output current and input voltage are very dependent on the heat sinking and/or lead length of the package. The data above represent pulse test conditions with junction temperature as indicated at the initiation of tests. 2. Power dissipation PD ≤ 0.75W. 9 KA78LXXA/KA78L05AA Electrical Characteristics(KA78L24A) (Continued) (VI = 33V, IO = 40mA, 0°C ≤ TJ ≤ 125°C, CI = 0.33 µF, CO = 0.1µF, unless otherwise specified. (Note1) Parameter Symbol Output Voltage Line Regulation (Note1) Load Regulation (Note1) Conditions VO TJ = 25°C ∆VO TJ = 25°C ∆VO TJ = 25°C Min. Typ. Max. Unit 23 24 25 V - 160 300 mV 28V ≤ VI ≤ 38V - 150 250 mV 1mA ≤ IO ≤ 100mA - 40 200 mV 1mA ≤ IO ≤ 40mA - 20 100 mV 27V ≤ VI ≤ 38V 27V ≤ VI ≤ 38V 1mA ≤ IO ≤ 40mA 22.8 - 25.2 V Output Voltage VO 27V ≤ VI ≤ VMAX (Note2) 1mA ≤ IO ≤ 70mA 22.8 - 25.2 V Quiescent Current IQ TJ = 25°C - 2.2 6.0 mA Quiescent Current Change With Line ∆IQ 28V ≤ VI ≤ 38V - - 1.5 mA With Load ∆IQ 1mA ≤ IO ≤ 40mA - - 0.1 mA VN TA = 25°C, 10Hz ≤ f ≤ 100kHz - 200 - µV/Vo Output Noise Voltage Temperature Coefficient of VO ∆VO/∆T IO = 5mA Ripple Rejection RR f = 120Hz, 28V ≤ VI ≤ 38V, TJ = 25°C Dropout Voltage VD TJ = 25°C - -2.0 - mV/°C 34 45 - dB - 1.7 - V Note: 1. The maximum steady state usable output current and input voltage are very dependent on the heat sinking and/or lead length of the package. The data above represent pulse test conditions with junction temperature as indicated at the initiation of tests. 2. Power dissipation PD ≤ 0.75W. 10 KA78LXXA/KA78L05AA Absolute Maximum Ratings Parameter Symbol Value Unit Input Voltage (for VO = 5V, 8V) (for VO = 12V to 18V) (for VO = 24V VI 30 35 40 V V V Operating Junction Temperature Range TJ 0 ~ +150 °C TSTG -65 ~ +150 °C Storage Temperature Range Electrical Characteristics(KA78L05AA) (Continued) (VI = 10V, IO = 40mA, 0°C ≤ TJ ≤ 125°C, CI = 0.33 µF, CO = 0.1µF, unless otherwise specified. (Note1) Parameter Symbol Output Voltage VO Line Regulation (Note1) Load Regulation (Note1) ∆VO ∆VO Conditions TJ = 25°C TJ = 25°C TJ = 25°C Min. Typ. Max. Unit 4.9 5.0 5.1 V 7V ≤ VI ≤ 20V - 8 150 mV 8V ≤ VI ≤ 20V - 6 100 mV 1mA ≤ IO ≤ 100mA - 11 50 mV 1mA ≤ IO ≤ 40mA - 5.0 25 mV 7V ≤VI ≤ 20V 1mA ≤ IO ≤ 40mA - - 5.15 V Output Voltage VO 7V ≤VI ≤ VMAX (Note2) 1mA ≤ IO ≤ 70mA 4.85 - 5.15 V Quiescent Current IQ TJ = 25°C - 2.0 5.5 mA - 1.5 mA Quiescent Current Change With Line ∆IQ 8V ≤VI ≤ 20V - With Load ∆IQ 1mA ≤ IO ≤ 40 mA - - 0.1 mA VN TA = 25°C, 10Hz ≤ f ≤ 100kHz - 40 - µV/Vo IO = 5mA - -0.65 - mV/°C 41 80 - dB - 1.7 - V Output Noise Voltage Temperature Coefficient of VO ∆VO/∆T Ripple Rejection RR f = 120Hz, 8V ≤ VI ≤ 18V, TJ = 25°C Dropout Voltage VD TJ = 25°C Note: 1. The maximum steady state usable output current and input voltage are very dependent on the heat sinking and/or lead length of the package. The data above represent pulse test conditions with junction temperature as indicated at the initiation of tests. 2. Power dissipation PD ≤ 0.75W. 11 KA78LXXA/KA78L05AA Typical Application 3(8) INPUT C1 0.33 µF NOTE 2 KA78LXXA NOTE 1 2(2,3,6,7) 1(1) OUTPUT 0. 1 µF NOTE 2 ’( )’ : 8SOP Type Note: 1. To specify an output voltage, substitute voltage value for “XX”. 2. Bypass Capacitors are recommend for optimum stability and transient response and should be located as close as possible to the regulator 12 KA78LXXA/KA78L05AA Mechanical Dimensions Package Dimensions in millimeters TO-92 +0.25 4.58 ±0.20 4.58 –0.15 14.47 ±0.40 0.46 ±0.10 1.27TYP [1.27 ±0.20] 1.27TYP [1.27 ±0.20] +0.10 0.38 –0.05 (0.25) +0.10 0.38 –0.05 1.02 ±0.10 3.86MAX 3.60 ±0.20 (R2.29) 13 KA78LXXA/KA78L05AA Mechanical Dimensions (Continued) Package Dimensions in millimeters 8-SOP Symbol Min Nom Max A - - 1.75 A1 0.10 0.15 0.25 A2 1.25 1.45 1.50 B 0.35 0.37 0.51 C 0.19 0.20 0.25 D 4.80 4.90 5.00 E 3.80 3.90 4.00 e 1.27BSC H 5.79 5.99 6.20 h 0.25 - 0.50 L 0.50 0.70 0.90 GP 14 0.36 BSC q 0 - 8 aaa - - 0.25 bbb - - 0.10 KA78LXXA/KA78L05AA Mechanical Dimensions (Continued) Package Dimensions in millimeters SOT-89 1.50 ±0.20 4.50 ±0.20 (0.40) (1.10) 2.50 ±0.20 C0.2 4.10 ±0.20 (0.50) 1.65 ±0.10 0.50 ±0.10 0.40 ±0.10 0.40 +0.10 –0.05 1.50 TYP 1.50 TYP 15 KA78LXXA/KA78L05AA Ordering Information Product Number Package Packing KA78L05AZTA Ammo KA78L05AZTF Tape & Reel KA78L05AZBU Bulk KA78L06AZTA Ammo KA78L06AZBU Tape & Reel KA78L08AZTA Ammo KA78L08AZTF Tape & Reel KA78L08AZBU Bulk KA78L09AZTA Ammo KA78L09AZBU KA78L10AZTA TO-92 Tape & Reel Ammo KA78L10AZBU Tape & Reel KA78L12AZTA Ammo KA78L12AZTF Tape & Reel KA78L12AZBU Bulk KA78L15AZTA Ammo KA78L15AZBU Tape & Reel KA78L18AZTA Ammo KA78L18AZBU Tape & Reel KA78L24AZTA Ammo KA78L05AMTF Tape & Reel KA78L05AMTM Tape & Reel KA78L08AMTF SOT-89 Tape & Reel KA78L12AMTF Tape & Reel KA78L08ADTF Tape & Reel 8-SOP KA78L12AD KA78L05AAZBU Tube Tape & Reel Tube KA78L12ADTF KA78L05AAZTA 0 ~ +125 °C Tube KA78L05ADTF KA78L08AD 5% Tape & Reel KA78L09AMTF KA78L05AD Output Voltage Tolerance Operating Temperature Tape & Reel TO-92 Ammo Bulk 2% Note: 1. For information on tape & reel and ammo pack specifications, including part orientation and tape sizes, please refer to our tape and reel data, www.fairchildsemi.com/products/analog/pdf/to92r_tr.pdf. 16 KA78LXXA/KA78L05AA 17 KA78LXXA/KA78L05AA DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 5/17/05 0.0m 001 Stock#DSxxxxxxxx 2005 Fairchild Semiconductor Corporation