DESCRIPTION BY APPD DATE B PERLIMINARY PER ER041174 GSA 1. MATERIAL SPECIFICATIONS: BEND SPRING: AISI 1080 STEEL OR D2 STEEL. SHAFT : D2 STEEL. HANDLE: CELLULOSE ACETATE. REV BB 04/11/12 NOTES: UNLESS OTHERWISE SPECIFIED 2. FINISH SPECIFICATIONS: BEND SPRING & SHAFT: .000100/.000150 NICKEL PER AMS-QQ-N-290 CLASS 2 OVER COPPER FLASH PER ASTM B734 (RoHS). 3 MARKING "KINGS P/N". 107-1506-24 107-1506-18 107-1506 CATALOG P/N 2.900 73.66 REF 24.00[609.6] 18.00[457.2] 9.10[231.1] A "A" REF .290 7.37 .038 .97 R.150 3.81 MARK 3 CATALOG P/N: SEE TABLE PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 1:4 THIRD ANGLE Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER SALES DRAWING DRAWN PSM APPROVED J.B. DMF029 B DATE APPROVED 11/05/09 WPM DATE APPROVED 11/06/09 XXX DATE 11/06/09 DATE XX/XX/XX DIN REMOVAL TOOL A SD107-1506 SHT 1 OF 1 REV B