SPECIFICATION CONTROL DRAWING Product Name B-106-8401 B-106-8502 øA min 4.0 [0.160] 4.6 [0.180] Product Dimensions øB øC L nom nom max 4.0 5.5 30 [0.160] [0.217] [1.180] 5.0 6.0 32 [0.197] [0.236] [1.260] Color (1) Red Blue Wire Dimensions Size Range øG mm2 (AWG) min max 0.5 - 1.0 1.4 4.0 (AWG 22-18) [0.055] [0.160] 1.5 - 2.5 2.0 4.6 (AWG 16-14) [0.080] [0.180] MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent color (1), radiation cross-linked modified polyamide with thermoplastic adhesive coating inside. 2. BULLET TERMINAL: Tin-plated brass. BASE METAL: C260 Brass. PLATING: Tin-plated per ASTM B545, Class A. APPLICATION 1. These controlled crimp devices are designed to terminate a tin-plated or bare copper stranded wire having an insulation rated for at least 75°C to a bullet terminal. It will provide a splash proof and strain relief connection. UL listed wire connector 91J4. 2. Temperature range: -55°C to +125°C. 3. For application tooling and installation, see RPIP-684-00. For best results, prepare the wire as shown: DuraSeal is a trademark of Tyco Electronics Corporation. = Tyco Electronics Corporation 300 Constitution Drive, Menlo Park, CA. 94025, U.S.A. TITLE: DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A DRAWN BY: ANGLES: N/A ROUGHNESS IN MICRON CAGE CODE: B-106-8XXX Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. REPLACES: DURASEAL BULLET RECEPTACLE Raychem DCR NUMBER: M. FORONDA 06090 D030375 D060181 © 2006 Tyco Electronics Corporation. All rights reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. REV.: DATE: A SCALE: 17-Jul-06 SIZE: --- SHEET: A 1 of 1