DESCRIPTION G REVISED PER ER 11418 2. MATERIAL SPECIFICATIONS: BRASS PER ASTM B16. BY APPD DATE DAO REV DAO 01/07/09 NOTES: UNLESS OTHERWISE SPECIFIED 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD74-0000. 3. FINISH SPECIFICATIONS: .000030 MIN. GOLD PER ASTM B488 OVER .000050 MIN. NICKEL PER AMS QQ-N-290. 4. ELECTRICAL SPECIFICATIONS: CURRENT RATING: 30 AMPS 5. SUGGESTED FOR USE WITH 12 GA WIRE OR EQUIVALENT. 6. REFER TO CAP10-01 FOR CABLE ASSEMBLY PROCEDURE. +.010 +.25 .00 .218 - .000 5.54 .167 4.24 .144±.001 3.66±.03 ACROSS FLATS .144 3.66 .275 6.99 .105±.003 2.67±.08 .250 6.35 CATALOG P/N: 01358 .095 2.41 MAX PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] ANGLES: ± 2° RECOMMENDED CABLE TRIM DIMENSIONS SCALE: 2:1 Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 SCALE: 8:1 CUSTOMER DRAWING DRAWN JEM APPROVED JED DATE APPROVED 08/12/03 CWB DATE APPROVED 08/12/03 MG DATE 08/16/03 DATE 08/16/03 POWERSNAP RIGHT ANGLE SOLDER MOUNT 12 AWG, 30 AMP A SD01358 SHT 1 OF 1 REV G