New Product V20100C, VF20100C, VB20100C & VI20100C Vishay General Semiconductor Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.50 V at IF = 5 A FEATURES TMBS ® • Trench MOS Schottky technology ITO-220AB TO-220AB • Low forward voltage drop, low power losses • High efficiency operation 2 3 1 1 V20100C • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) 3 2 VF20100C PIN 1 PIN 2 PIN 1 PIN 3 CASE PIN 3 TO-263AB • Solder dip 260 °C, 40 s (for TO-220AB, ITO-220AB and TO-262AA package) PIN 2 • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TO-262AA K K TYPICAL APPLICATIONS For use in high frequency inverters, switching power supplies, freewheeling diodes, OR-ing diode, dc-to-dc converters and reverse battery protection. 2 1 1 VB20100C PIN 1 3 VI20100C K PIN 2 2 HEATSINK PIN 1 PIN 2 PIN 3 K MECHANICAL DATA Case: TO-220AB, TO-262AA ITO-220AB, TO-263AB and Epoxy meets UL 94V-0 flammability rating PRIMARY CHARACTERISTICS IF(AV) 2 x 10 A VRRM 100 V IFSM 150 A VF at IF = 10 A 0.58 V TJ max. 150 °C Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Maximum repetitive peak reverse voltage V20100C VF20100C VB20100C VI20100C UNIT VRRM 100 V per device Maximum average forward rectified current (Fig. 1) per diode IF(AV) 20 10 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 150 A VAC 1500 V TJ, TSTG - 40 to + 150 °C Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min Operating junction and storage temperature range Document Number: 88977 Revision: 31-Jul-08 per diode For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 New Product V20100C, VF20100C, VB20100C & VI20100C Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IR = 10 mA Breakdown voltage per diode Instantaneous forward voltage per diode (1) SYMBOL TYP. VBR TA = 25 °C MAX. UNIT 105 (minimum) - V 0.55 0.65 0.79 IF = 5 A IF = 10 A TA = 25 °C IF = 5 A IF = 10 A TA = 125 °C 0.50 0.58 0.68 VR = 70 V TA = 25 °C TA = 125 °C 17 5.3 - µA mA VR = 100 V TA = 25 °C TA = 125 °C 12 800 25 µA mA V VF Reverse current per diode (2) IR Notes: (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL V20100C VF20100C VB20100C VI20100C UNIT RθJC 2.8 5.5 2.8 2.8 °C/W Typical thermal resistance per diode ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB V20100C-E3/4W 1.881 4W 50/tube Tube ITO-220AB VF20100C-E3/4W 1.75 4W 50/tube Tube TO-263AB VB20100C-E3/4W 1.39 4W 50/tube Tube TO-263AB VB20100C-E3/8W 1.39 8W 800/reel Tape and reel TO-262AA VI20100C-E3/4W 1.452 4W 50/tube Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 24 20 20 VF20100C 16 D = 0.5 18 Average Power Loss (W) Average Forward Current (A) Resistive or Inductive Load V20100C VI(B)20100C 12 8 4 16 D = 0.2 14 D = 1.0 D = 0.1 12 10 8 T 6 4 2 0 D = 0.8 D = 0.3 D = tp/T tp 16 20 0 0 25 50 75 100 125 150 175 0 4 8 12 24 Case Temperature (°C) Average Forward Current (A) Figure 1. Maximum Forward Current Derating Curve Figure 2. Forward Power Loss Characteristics Per Diode www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88977 Revision: 31-Jul-08 New Product V20100C, VF20100C, VB20100C & VI20100C Vishay General Semiconductor 10 Transient Thermal Impedance (°C/W) Instantaneous Forward Current (A) 100 TA = 150 °C TA = 125 °C 10 TA = 25 °C 1 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Junction to Case V(B,I)20100C 1 0.01 1.6 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance Per Diode 10 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (mA) 100 TA = 150 °C 10 TA = 125 °C 1 0.1 TA = 25 °C 0.01 0.001 10 20 30 40 50 60 70 80 90 100 Junction to Case VF20100C 1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 4. Typical Reverse Characteristics Per Diode Figure 7. Typical Transient Thermal Impedance Per Diode Junction Capacitance (pF) 10 000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1000 100 10 0.1 1 10 100 Reverse Voltage (V) Figure 5. Typical Junction Capacitance Per Diode Document Number: 88977 Revision: 31-Jul-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 New Product V20100C, VF20100C, VB20100C & VI20100C Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB ITO-220AB 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) PIN 2 3 0.160 (4.06) 0.140 (3.56) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 2 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7° REF. 0.350 (8.89) 0.330 (8.38) 3 7° REF. 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.560 (14.22) 0.530 (13.46) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.057 (1.45) 0.045 (1.14) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.671 (17.04) 0.651 (16.54) PIN 1 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 7° REF. 0.076 (1.93) REF. 45° REF. 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 1 0.190 (4.83) 0.170 (4.32) 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-262AA 0.185 (4.70) 0.175 (4.44) 0.411 (10.45) MAX. 0.250 (6.35) MIN. 30° (TYP.) (REF.) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) K 0.950 (24.13) 0.920 (23.37) 1 PIN 2 0.401 (10.19) 0.381 (9.68) 0.350 (8.89) 0.330 (8.38) 0.510 (12.95) 0.470 (11.94) 3 0.160 (4.06) 0.140 (3.56) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.104 (2.65) 0.096 (2.45) PIN 1 PIN 2 PIN 3 HEATSINK 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.022 (0.56) 0.014 (0.35) 0.205 (5.20) 0.195 (4.95) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) www.vishay.com 4 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88977 Revision: 31-Jul-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1