New Product MBR(F,B)1090 & MBR(F,B)10100 Vishay General Semiconductor High-Voltage Schottky Rectifier FEATURES • Trench MOS Schottky technology TMBS® TO-220AC ITO-220AC • Lower power losses, high efficiency • Low forward voltage drop • High forward surge capability • High frequency operation 2 2 1 1 MBR1090 MBR10100 MBRF1090 MBRF10100 PIN 1 PIN 1 CASE PIN 2 • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) • Solder dip 260 °C, 40 s (for TO-220AC and ITO-220AC package) PIN 2 TO-263AB • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC K 2 TYPICAL APPLICATIONS 1 MBRB1090 MBRB10100 PIN 1 PIN 2 For use in high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters or polarity protection application. K HEATSINK MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 10 A VRRM 90 V, 100 V IFSM 150 A VF 0.65 V TJ max. 150 °C Case: TO-220AC, ITO-220AC, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for commercial grade, meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR1090 MBR10100 UNIT Maximum repetitive peak reverse voltage VRRM 90 100 V Working peak reverse voltage VRWM 90 100 V Maximum DC blocking voltage VDC 90 100 V Maximum average forward rectified current at TC = 133 °C IF(AV) 10 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 150 A Peak repetitive reverse current at tp = 2 µs, 1 kHz IRRM 0.5 A Voltage rate of change (rated VR) Operating junction and storage temperature range Isolation voltage (ITO-220AC only) From terminal to heatsink t = 1 min www.vishay.com 476 dV/dt 10 000 V/µs TJ, TSTG - 65 to + 150 °C VAC 1500 V For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 89034 Revision: 19-May-08 New Product MBR(F,B)1090 & MBR(F,B)10100 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage (1) IF = 10 A IF = 10 A IF = 20 A Maximum reverse current at working peak reverse voltage (2) SYMBOL VALUE UNIT TC = 25 °C TC = 125 °C TC = 125 °C VF 0.80 0.65 0.75 V TJ = 25 °C TJ = 100 °C IR 100 6.0 µA mA Notes: (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR MBRF MBRB UNIT RθJA RθJC 60 2.0 3.5 60 2.0 °C/W Typical thermal resistance ORDERING INFORMATION (Example) PACKAGE UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AC MBR10100-E3/4W PREFERRED P/N 1.845 4W 50/tube Tube ITO-220AC MBRF10100-E3/4W 1.661 4W 50/tube Tube TO-263AB MBRB10100-E3/4W 1.384 4W 50/tube Tube TO-263AB MBRB10100-E3/8W 1.384 8W 800/reel Tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 10 160 Peak Forward Surge Current (A) Average Forward Current (A) Resistive or Inductive Load 8 6 4 2 TJ = TJ max. 8.3 ms Single Half Sine-Wave 140 120 100 80 60 40 0 0 50 100 150 1 10 100 Case Temperature (°C) Number of Cycles at 60 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Document Number: 89034 Revision: 19-May-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 477 New Product MBR(F,B)1090 & MBR(F,B)10100 Vishay General Semiconductor 100 Transient Thermal Impedance (°C/W) Instantaneous Forward Current (A) 100 TJ = 150 °C 10 TJ = 125 °C 1 0.1 TJ = 25 °C 0.01 0 0.1 0.2 0.3 0.4 0.5 0.7 0.8 0.9 10 1 MBR(B) 0.1 0.01 1.0 0.1 1 100 10 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 3. Typical Instantaneous Forward Characteristics Figure 6. Typical Transient Thermal Impedance 100 10 TJ = 150 °C Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (mA) 0.6 Junction to Case 10 TJ = 125 °C 1 0.1 0.01 TJ = 25 °C 0.001 10 20 30 40 60 50 70 80 90 100 Junction to Case 1 0.1 0.01 MBRF 0.001 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Characteristics Figure 7. Typical Transient Thermal Impedance Junction Capacitance (pF) 10 000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1000 100 10 1 10 100 Reverse Voltage (V) Figure 5. Typical Junction Capacitance www.vishay.com 478 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 89034 Revision: 19-May-08 New Product MBR(F,B)1090 & MBR(F,B)10100 Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) ITO-220AC TO-220AC 0.404 (10.26) 0.384 (9.75) 0.415 (10.54)MAX. 0.154 (3.91) DIA. 0.148 (3.74) 0.370 (9.40) 0.360 (9.14) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 1 PIN 2 0.560 (14.22) 0.530 (13.46) 7° REF. 0.057 (1.45) 0.045 (1.14) CASE 0.037 (0.94) 0.027(0.68) 0.205 (5.20) 0.195 (4.95) 0.110 (2.79) 0.100 (2.54) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.022 (0.56) 0.014 (0.36) 7° REF. 0.350 (8.89) 0.330 (8.38) 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) PIN 1 0.135 (3.43) DIA. 0.122 (3.08) DIA. 2 1 0.110 (2.79) 0.100 (2.54) PIN 2 0.105 (2.67) 0.095 (2.41) 0.671 (17.04) 0.651 (16.54) PIN 1.148 (29.16) 1.118 (28.40) 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 7° REF. 0.076 (1.93) REF. 45° REF. 0.635 (16.13) 0.625 (15.87) 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-263AB 0.41 1 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591(15.00) 0.055 (1.40) 0.045 (1.14) 0 to 0.01 (0 to 0.254) 0.105 (2.67) 0.095 (2.41) Document Number: 89034 Revision: 19-May-08 0.205 (5.20) 0.195 (4.95) 0.42 MIN. (10.66) 0.33 (8.38) MIN. 0.055 (1.40) 0.047 (1.19) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) Mounting Pad Layout 0.140 (3.56) 0.110 (2.79) 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 MIN. (2.032) 0.105 (2.67) (0.095) (2.41) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 479 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1