New Product M3035S, M3045S Vishay General Semiconductor Schottky Barrier Rectifier FEATURES • Guardring for overvoltage protection TO-220AB • Lower power losses, high efficiency • Low forward voltage drop • High forward surge capability • High frequency operation • Solder dip 275 °C max. 10 s, per JESD 22-B106 2 • Compliant to RoHS directive 2002/95/EC accordance to WEEE 2002/96/EC 3 1 M3035S, M3045S and in • Halogen-free according to IEC 61249-2-21 definition PIN 1 PIN 2 PIN 3 CASE TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters or polarity protection applications. MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 30 A VRRM 35 V, 45 V IFSM 200 A VF at IF = 30 A 0.61 V TJ max. 150 °C Case: TO-220AB Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free and RoHS compliant, commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test per Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL M3035S M3045S UNIT Maximum repetitive peak reverse voltage VRRM 35 45 V Maximum average forward rectified current (fig. 1) IF(AV) 30 A Peak forward surge current 10 ms single half sine-wave superimposed on rated load IFSM 200 A Peak repetitive reverse current per leg at tp = 2 µs, 1 kHz IRRM 2.0 A Voltage rate of change (rated VR) dV/dt 10 000 V/µs TJ - 65 to + 150 °C TSTG - 65 to + 175 °C Operating junction temperature range Storage temperature range Document Number: 89157 Revision: 17-Nov-09 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 New Product M3035S, M3045S Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 15 A TJ = 25 °C IF = 30 A Maximum instantaneous forward voltage SYMBOL VF (1) IF = 15 A TJ = 25 °C Maximum instantaneous reverse current at rated VR IR (2) TJ = 125 °C Typical junction capacitance 4.0 V, 1 MHz MAX. UNIT 0.54 - 0.65 0.70 0.46 - 0.61 0.66 40 200 µA 55 mA V TJ = 125 °C IF = 30 A TYP. 26 CJ 980 pF Notes (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance M3035S RθJC M3045S UNIT 2.0 °C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB M3045S-M3/4W 1.878 4W 50/tube Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 300 Peak Forward Surge Current (A) Average Forward Current (A) 35 30 25 20 15 10 5 TJ = TJ Max. 8.3 ms Single Half Sine-Wave 250 200 150 100 50 0 0 0 25 50 75 100 125 150 1 100 10 Case Temperature (°C) Number of Cycles at 60 Hz Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 89157 Revision: 17-Nov-09 New Product M3035S, M3045S Vishay General Semiconductor 10 000 TJ = 150 °C Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 TJ = 125 °C 1 TJ = 25 °C 0.1 Pulse Width = 300 µs 1 % Duty Cycle 0.01 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 1000 100 0.1 0.9 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 1000 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (mA) 0 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TJ = 150 °C 100 10 TJ = 125 °C 1 0.1 TJ = 25 °C 0.01 0.001 10 20 30 40 50 60 70 80 90 100 10 Junction to Case 1 0.1 0.01 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Fig. 4 - Typical Reverse Characteristics Fig. 6 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 1 PIN 2 0.635 (16.13) 0.625 (15.87) 3 0.160 (4.06) 0.140 (3.56) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) Document Number: 89157 Revision: 17-Nov-09 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1