RN1901FE~RN1906FE TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT process) (Bias Resistor Built-in Transistor) RN1901FE, RN1902FE, RN1903FE RN1904FE, RN1905FE, RN1906FE Switching, Inverter Circuit, Interface Circuit and Driver Circuit Applications Unit: mm • Two devices are incorporated into an Extreme-Super-Mini (6-pin) package. • Incorporating a bias resistor into a transistor reduces parts count. Reducing the parts count enables the manufacture of ever more compact equipment and lowers assembly cost. • Complementary to RN2901FE to RN2906FE Equivalent Circuit and Bias Resistor Values C R2 B R1 E Type No. R1 (kΩ) R2 (kΩ) RN1901FE 4.7 4.7 RN1902FE 10 10 RN1903FE 22 22 RN1904FE 47 47 RN1905FE 2.2 RN1906FE 4.7 JEDEC ― 47 JEITA ― 47 TOSHIBA 2-2N1G Weight: 3 mg (typ.) Absolute Maximum Ratings (Ta = 25°C) (Q1, Q2 common) Equivalent Circuit Characteristics Symbol Rating Unit VCBO 50 V VCEO 50 V (top view) 6 Collector-base voltage Collector-emitter voltage Emitter-base voltage RN1901FE to RN1906FE RN1901FE to RN1904FE RN1905FE, RN1906FE Collector current Collector power dissipation RN1901FE to RN1906FE Junction temperature Storage temperature range Note: 4 Q2 Q1 10 VEBO 5 V 5 1 IC 100 mA 100 mW Tj 150 °C Tstg −55 to 150 °C PC (Note 1) 2 3 Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Total rating 1 2010-05-14 RN1901FE~RN1906FE Electrical Characteristics (Ta = 25°C) (Q1, Q2 common) Characteristics Collector cut-off current Symbol Test Condition ⎯ 100 ICEO VCE = 50 V, IB = 0 ⎯ ⎯ 500 0.82 ⎯ 1.52 0.38 ⎯ 0.71 0.17 ⎯ 0.33 0.082 ⎯ 0.15 0.078 ⎯ 0.145 0.074 ⎯ 0.138 RN1901FE 30 ⎯ ⎯ RN1902FE 50 ⎯ ⎯ 70 ⎯ ⎯ 80 ⎯ ⎯ RN1905FE 80 ⎯ ⎯ RN1906FE 80 ⎯ ⎯ ⎯ 0.1 0.3 RN1901FE 1.1 ⎯ 2.0 RN1902FE 1.2 ⎯ 2.4 1.3 ⎯ 3.0 1.5 ⎯ 5.0 RN1905FE 0.6 ⎯ 1.1 RN1906FE 0.7 ⎯ 1.3 1.0 ⎯ 1.5 0.5 ⎯ 0.8 VCE = 10 V, IC = 5 mA ⎯ 250 ⎯ MHz VCB = 10 V, IE = 0, f = 1 MHz ⎯ 3 6 pF RN1901FE 3.29 4.7 6.11 RN1902FE 7 10 13 15.4 22 28.6 32.9 47 61.1 RN1905FE 1.54 2.2 2.86 RN1906FE 3.29 4.7 6.11 RN1901FE to 1904FE 0.9 1.0 1.1 RN1903FE RN1904FE VEB = 10 V, IC = 0 IEBO VEB = 5 V, IC = 0 RN1906FE Input voltage (ON) Input voltage (OFF) Transition frequency Collector output capacitance Input resistor Resistor ratio Unit ⎯ RN1905FE Collector-emitter saturation voltage Max VCB = 50 V, IE = 0 RN1902FE DC current gain Typ. ICBO RN1901FE to 1906FE RN1901FE Emitter cut-off current Min RN1903FE RN1904FE RN1901FE to 1906FE RN1903FE RN1904FE RN1901FE to 1904FE RN1905FE, 1906FE RN1901FE to 1906FE RN1901FE to 1906FE RN1903FE RN1904FE RN1905FE hFE VCE (sat) VI (ON) VI (OFF) fT Cob R1 R1/R2 RN1906FE VCE = 5 V, IC = 10 mA IC = 5 mA, IB = 0.25 mA VCE = 0.2 V, IC = 5 mA VCE = 5 V, IC = 0.1 mA ⎯ ⎯ mA V V V kΩ 0.0421 0.0468 0.0515 0.09 2 nA 0.1 0.11 2010-05-14 RN1901FE~RN1906FE Q1, Q2 Common RN1901FE RN1102FT RN1902FE RN1903FE RN1904FE RN1905FE RN1906FE 3 2010-05-14 RN1901FE~RN1906FE Q1, Q2 Common RN1901FE RN1902FE RN1903FE RN1904FE RN1905FE RN1906FE 4 2010-05-14 RN1901FE~RN1906FE RN1901FE RN1902FE RN1903FE RN1904FE RN1905FE RN1906FE 5 2010-05-14 RN1901FE~RN1906FE RN1901FE RN1902FE RN1903FE RN1904FE RN1905FE RN1906FE 6 2010-05-14 RN1901FE~RN1906FE Marking Type Name Marking Type name RN1901FE XA Type name RN1902FE XB Type name RN1903FE XC Type name RN1904FE XD Type name RN1905FE XE Type name RN1906FE XF 7 2010-05-14 RN1901FE~RN1906FE RESTRICTIONS ON PRODUCT USE • Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively “Product”) without notice. • This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission. • Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS. • Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. • Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. • Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. • The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. • ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. • Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. • Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. 8 2010-05-14