TOSHIBA TL19W01-WW-T32

TL19W01-WW(T32
TOSHIBA LED lamps
TL19W01-WW(T32
○ Surface-mount devices
3.1 (L) mm × 3.8 (W) mm × 0.65 (H) mm size
•
High luminous flux LED: 100 lm(typ.) @IF=300 mA
•
Color: white (3500K)
•
Reflow-soldering is available
•
Applications : general lighting and etc.
Unit: mm
3.1
3.8
•
Part Number
TL19W01-WW
Color
Material
White (3500K)
InGaN
0.65
Color and Material
(0.5)
Characteristics
1
2
Symbol
Rating
Unit
Forward Current (Note.2)
IF
350
mA
Pulse current (Note.3)
IFP
400
mA
Power Dissipation
PD
1.33
W
Operating Temperature
Topr
−40 to 100
°C
JEDEC
―
Storage Temperature
Tstg
−40 to 100
°C
JEITA
―
Junction Temperature
Tj
120
°C
TOSHIBA
1.9
1.Cathode
2.Anode
3.4
Absolute Maximum Ratings (Ta = 25°C) (Note.1)
0.4
Tolerance：± 0.1
4-4L1
Note 1: Using continuously under heavy loads (e.g. the application of high
Weight: 0.017 g (typ.)
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within
the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/”Derating Concept and Methods”) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Note 2: The junction-to-ambient thermal resistance, Rth(j-a), should be kept below 50 ℃ /W so that the
TL19W01-WW(T32) is not exposed to a condition beyond the absolute maximum ratings. Rth(j-a): Thermal
resistance from the LED junction to ambient temperature
IF – Ta
Allowable forward current
IF
(mA)
400
350
300
250
200
150
100
50
Rth(j-a)=50℃/W
0
0
20
40
60
Ambient temperature
80
100
(°C)
Ta
Note 3: Pulse width 10ms, Duty 1/10
1
2010-12-13
TL19W01-WW(T32
Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test condition
Min
Typ.
Max
Unit
Forward Voltage (Note 4)
VF
IF =300 mA
2.9
3.3
3.8
V
Reverse Voltage
VR
IR = 1 mA
⎯
0.75
⎯
V
Thermal Resistance (Note 5)
Rth(j-s)
IF = 300 mA
⎯
9
⎯
°C/W
Note 4: VF rank classification
The specification on the following table is used for VF classification of LEDs in Toshiba facility.
Each reel includes the same rank LEDs. Let the delivery ratio of each rank be unquestioned.
Ta=25°C
Tolerance: +/-0.1V
Forward Voltage
Part Number
VF
Min
Typ.
Max
TL19W01-WW(T32)
2.9
3.3
3.8
1
2.9
⎯
3.2
2
3.2
⎯
3.5
3
3.5
⎯
3.8
Unit
IF
300
V
mA
Note 5: Rth(j-s): Thermal resistance from the LED junction to solder point.
Optical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test condition
Cx
IF =300 mA
Chromaticity
Min
Typ.
Max
Unit
⎯
(Note 6)
Cy
IF =300 mA
Color temperature
CCT
IF =300 mA
⎯
3500
⎯
⎯
K
Luminous flux (Note 7)
ΦV
IF = 300 mA
80
100
120
lm
Color rendering index
Ra
IF = 300 mA
⎯
65
⎯
⎯
(Note 6)
Note 6: Chromaticity classification
The product is classified at the following chromaticity coordinate groups.
Each reel includes the same rank LEDs. Let the delivery ratio of each rank be unquestioned.
Test conditions: IF=300 mA, Ta=25°C
Tolerance: ±0.01
0.44
6A
0.43
0.42
0.41
3500K
3710K
Cy
0.40
6B
6C
6B
0.39
0.38
3220K
6D
6A
6C
0.37
ANSI C78.377
0.36
0.35
0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45
Cx
2
6D
Cx
Cy
0.3889
0.3941
0.4080
0.4017
0.3941
0.3996
0.4146
0.4080
0.4080
0.4146
0.4299
0.4221
0.4017
0.4080
0.4221
0.4147
0.3690
0.3848
0.3916
0.3751
0.3848
0.4015
0.4089
0.3916
0.3916
0.4089
0.4165
0.3984
0.3751
0.3916
0.3984
0.3814
2010-12-13
TL19W01-WW(T32
Note 7: ΦV rank classification
The specification on the following table is used for F classification of LEDs in Toshiba facility.
Each reel includes the same rank LEDs. Let the delivery ratio of each rank be unquestioned.
Ta=25°C
Tolerance: +/-10%
Luminous flux
Part Number
ΦV
Min
Typ.
Max
80
100
120
B08
80
⎯
90
B09
90
⎯
100
B10
100
⎯
110
B11
110
⎯
120
TL19W01-WW(T32
Unit
lm
IF
300
mA
Cautions
• The product is sensitive to electrostatic and care must be fully taken when handling products. Particularly in
the case that an over-voltage shall be applied, the overflowed energy may cause damage to or possibly result in
destruction of the product. Users shall take absolutely secure countermeasures against electrostatic and surge
when handling the product.
• This product is designed as a general display light source usage, and it has applied the measurement standard
that matched with the sensitivity of human's eyes. Therefore, it is not intended for usage of functional
application (ex. Light source for sensor, optical communication and etc) except general display light source.
• Please note the handling of products during evaluation.
1. Please do not apply pressure to the upper surface of the product with finger, tweezers, and others. Failure of
product to light up may occur due to package deformation, wire deformation and/or disconnection.
2. Should tweezers be used in product handling, one with flat surfaces is recommended.
3. Please handle the product widthwise.
4. Please do not drop the product. There is a possibility for package transformation etc. to occur when the product
is dropped.
5. Please do not stack the Printed Circuit Boards on which the product is mounted to prevent damages to product
surface. Also, please note not to damage the surface of the product with cushioning material etc. Surface
damage to the product may influence their optical characteristics.
3
2010-12-13
TL19W01-WW(T32
TL19W01-WW
IF – V F
ΦV
(typ.)
– IF
(typ.)
3
1000
Luminous flux ΦV /ΦV (300mA)
Forward Current
IF (mA)
Ta = 25°C
300
100
30
10
1.6
2.0
2.4
2.8
3.2
3.6
Forward Voltage
4.0
VF
0.3
0.1
0.03
0.01
10
4.4
50
30
100
IF
1.0
10
Relative emission Intensity
1
0.1
-20
0
20
40
60
Ambient Temperature Ta
80
0.8
0.6
0.4
0.2
0
300
100
(°C)
(typ.)
Ta = 25°C
IF= 300mA
-40
(mA)
Wavelength characteristic
(typ.)
3000 5000
300 500 1000
Forward Current
(V)
Relative ΦV – Ta
Relative luminous flux ΦV
Ta = 25°C
1
400
500
Wavelength
600
700
800
λ (nm)
Radiation pattern
Ta = 25°C
(typ.)
20°
10°
0°
10°
30°
20°
30°
40°
40°
50°
50°
60°
60°
70°
70°
80°
90°
80°
0
0.2
0.4
0.6
0.8
90°
1.0
4
2010-12-13
TL19W01-WW(T32
Pin connection
1
2
1. Cathode
2. Anode
5
2010-12-13
TL19W01-WW(T32
Packaging
This LED device is packed in an aluminum envelope with a silica gel and a moisture indicator to avoid moisture
absorption. The optical characteristics of the device may be affected by exposure to moisture in the air before
soldering and the device should therefore be stored under the following conditions:
1. This moisture proof bag may be stored unopened within 12 months at the following conditions.
Temperature: 5°C~30°C
Humidity: 90% (max)
2. After opening the moisture proof bag, the device should be assembled within 168 hours in an environment of
5°C to 30°C/60% RH or below.
3. If upon opening, the moisture indicator card shows humidity 30% or above (Color of indication changes to
pink) or the expiration date has passed, the device should be baked in taping with reel.
After baking, use the baked device within 72 hours, but perform baking only once.
Baking conditions: 60±5°C, for 24 to 48 hours.
Expiration date: 12 months from sealing date, which is imprinted on the label affixed.
4. Repeated baking can cause the peeling strength of the taping to change, then leads to trouble in mounting.
5. If the packing material of laminate would be broken, the hermeticity would deteriorate. Therefore, do not
throw or drop the packed devices.
Mounting Method
Soldering
•
Reflow soldering (example)
Temperature profile for Pb soldering (example)
Temperature profile for Pb-free soldering (example)
5 s max(*)
10 s max (*)
(*)
(*)
140~160°C max(*)
(*)
4°C/s max(*)
4°C/s max
60~120 s max(*)
Time
•
•
•
•
•
260°C max
Package surface
temperature (°C)
Package surface
temperature (°C)
240°C max
4°C/s max(*)
max(*)
150~180°C 230°C
4°C/s max(*)
max(*)
60~120 s
Time
(s)
30~50s max(*)
(s)
The product is evaluated using above reflow soldering conditions. No additional test is performed exceed the
condition (i.e. the condition more than (*)MAX values) as a evaluation. Please perform reflow soldering under
the above conditions.
Please perform the first reflow soldering with reference to the above temperature profile and within 168 h of
opening the package.
Second reflow soldering
In case of second reflow soldering should be performed within 168 h of the first reflow under the above
conditions. Storage conditions before the second reflow soldering: 30°C, 60% RH (max)
When any soldering corrections are made manually,a hot-plate should be used and do not use soldering iron.
(only once at each soldering point)
Do not perform wave soldering.
Land pattern dimensions for reference only
Unit : mm
6
2010-12-13
TL19W01-WW(T32
Cleaning
When cleaning is required after soldering, Toshiba recommends the following cleaning solvents.
It is confirmed that these solvents have no effect on semiconductor devices in our dipping test (under the
recommended conditions). In selecting the one for your actual usage, please perform sufficient review
on washing condition, using condition and etc.
ASAHI CLEAN AK-225AES
KAO CLEAN TROUGH 750HS
PINE ALPHA ST-100S
: (made by ASAHI GLASS)
: (made by KAO)
: (made by ARAKAWA CHEMICAL)
Precautions when Mounting
Do not apply force to the plastic part of the LED under high-temperature conditions.
To avoid damaging the LED plastic, do not apply friction using a hard material.
When installing the PCB in a product, ensure that the device does not come into contact with other
components.
Tape Specifications
1. Product number format
The type of package used for shipment is denoted by a symbol suffix after the product number. The
method of classification is as below. (this method, however does not apply to products whose electrical
characteristics differ from standard Toshiba specifications)
(1) Tape Type: T32 (8-mm pitch)
(2) Example
TL19W01-WW
(T32
Tape type
Toshiba product No.
2.
Tape dimensions
Unit: mm
Symbol
Dimension
Tolerance
Symbol
Dimension
Tolerance
D
1.5
+0.1/−0
P2
2.0
±0.05
E
1.75
±0.1
W
8.0
±0.2
P0
4.0
±0.1
P
8.0
±0.1
t
0.3
±0.05
A0
4.1
±0.1
F
3.5
±0.05
B0
3.4
±0.1
D1
1.1
±0.1
K0
0.8
±0.05
P0
D
K0
t
P2
E
F
W
B0
極性
A0
D1
P
7
2010-12-13
TL19W01-WW(T32
3. Reel dimensions
Unit: mm
9 +1/−0
φ60
2 ± 0.5
φ13
φ44
+0
180 −4
11.4 ± 1.0
4. Leader and trailer sections of tape
40 mm or more
40 mm or more
Leading part: 190 mm (min)
8
2010-12-13
TL19W01-WW(T32
5. Packing form
(1) Packing quantity
Reel
1,000 pcs
Carton
5,000 pcs
(2) Packing form: Each reel is sealed in an aluminum pack with silica gel.
6. Label format
(1) Example : TL19W01-WW(T32
P/N:
TOSHIBA
TYPE
TL19W01-WW(T32
ADDC
xxx
1) xxxxxx
3) (xxxxx)
Q’TY
2) xxxxxxxx
4) xxx
1,000 pcs
5)xxxx
6) xxxxxxxxxx
7) Use
under 5-30degC/60%RH within 168h
SEALED:
DIFFUSED IN xxxxx
ASSEMBLED IN xxxxx
[[G]]/RoHS COMPATIBLE
*Y380xxxxxxxxxxxxxxxxxx*
(1)-1 Contents about Note section (Each example means the contents are different for each lot.)
Information for Toshiba use
Information for customers use
1) Lot code
4) Management code
Example: 2707C2B
Example:
2) Key code
015
32G
5) Packing quantity
Example: 12345
Example: 1000
3) Rank symbol
6) Product information (refer to section (1)-2)
Example: 1AB102
E6SBN-0Exxx-0B
7) Storage condition after opening
Use under 5-30 degC/60%RH within 168h
(1)-2 Explanations for “ADDC” and “Product information”
ADDC Product information
Assembled in domestic :
(L1
A35
Assembled in overseas :
(L2
135
(2) Label location
• Reel
• Carton
Tape feel direction
Label position
Label position
• The aluminum package in which the reel is supplied also has the label attached to
center of one side.
9
2010-12-13
TL19W01-WW(T32
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
10
2010-12-13