TOSHIBA TLP4202G_07

TLP4202G
TOSHIBA Photocoupler
Photorelay
TLP4202G
Telecommunication
Measurement Equipment
Security Equipment
FA
Unit: mm
The Toshiba TLP4202G consists of an aluminum gallium arsenide
infrared emitting diode optically coupled to a photo-MOSFET in a SOP
package. This 2-form-B (NC) photorelay features a withstanding voltage
of 350 V.
•
8-pin SOP (2.54SOP8): Height = 2.1 mm, pitch = 2.54 mm
•
Normally closed (2-form-B) device
•
Peak off-state voltage: 350 V (min)
•
Trigger LED current: 3 mA (max)
•
On-state current: 90 mA (max)
•
On-state resistance: 50 Ω (max)
•
Isolation voltage: 1500 Vrms (min)
•
UL Recognized: UL1577, File No. E67349
Pin Configuration (top view)
8
2
7
3
6
4
5
: Drain D1
6
: Drain D2
7
: Drain D3
8
: Drain D4
JEITA
―
11-10H1
Weight: 0.2 g (typ.)
2, 4 : Cathode
5
―
TOSHIBA
1, 3 : Anode
1
JEDEC
1
2007-10-01
TLP4202G
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
IF
50
mA
ΔIF/°C
−0.5
mA/°C
Peak forward current (100 μs pulse, 100 pps)
IFP
1
A
Reverse voltage
VR
5
V
Junction temperature
Tj
125
°C
VOFF
350
V
ION
90
mA
ΔION/°C
−0.9
mA/°C
Tj
125
°C
Storage temperature range
Tstg
−55 to 125
°C
Operating temperature range
Topr
−40 to 85
°C
Lead soldering temperature (10 s)
Tsol
260
°C
BVS
1500
Vrms
Forward current
LED
Forward current derating (Ta >
= 25°C)
Detector
Off-state output terminal voltage
On-state current
On-state current derating (Ta >
= 25°C)
Junction temperature
Isolation voltage (AC, 1 min, R.H. <
= 60%)
(Note 1)
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Pins 1, 2, 3 and 4 are shorted together, and pins 5, 6, 7 and 8 are shorted together.
Recommended Operating Conditions
Characteristics
Supply voltage
Symbol
Min
Typ.
Max
Unit
VDD
⎯
⎯
280
V
Forward current
IF
5
⎯
25
mA
On-state current
ION
⎯
⎯
90
mA
Operating temperature
Topr
−20
⎯
65
°C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
Electrical Characteristics (Ta = 25°C)
Detector
LED
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Forward voltage
VF
IF = 10 mA
1.0
1.15
1.3
V
Reverse current
IR
VR = 5 V
⎯
⎯
10
μA
Capacitance
CT
V = 0, f = 1 MHz
⎯
30
⎯
pF
Off-state current
IOFF
VOFF = 350 V, IF = 5 mA
⎯
⎯
1
μA
Capacitance
COFF
V = 0, f = 1 MHz, IF = 5 mA
⎯
30
⎯
pF
2
2007-10-01
TLP4202G
Coupled Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Trigger LED current
IFC
IOFF = 10 μA
⎯
1
3
mA
Return LED current
IFT
ION = 90 mA
0.1
⎯
⎯
mA
On-state resistance
RON
ION = 90 mA
⎯
27
50
Ω
Min
Typ.
Max
Unit
0.8
⎯
pF
⎯
Ω
Isolation Characteristics (Ta = 25°C)
Characteristics
Capacitance input to output
Isolation resistance
Symbol
Test Condition
CS
VS = 0, f = 1 MHz
⎯
RS
VS = 500 V, R.H. <
= 60%
5 × 10
BVS
10
14
1500
⎯
⎯
AC, 1 s, in oil
⎯
3000
⎯
DC, 1 min, in oil
⎯
3000
⎯
Vdc
Min
Typ.
Max
Unit
⎯
0.25
0.5
ms
⎯
0.5
1
ms
AC, 1 min
Isolation voltage
10
Vrms
Switching Characteristics (Ta = 25°C)
Characteristics
Turn-on time
Symbol
tON
Turn-off time
Test Condition
RL = 200 Ω
VDD = 20 V, IF = 5 mA
tOFF
(Note 2)
Note 2: Switching time test circuit
IF
1, 3
6, 8
RL
VDD
IF
VOUT
2, 4
VOUT
5, 7
10%
tON
3
90%
tOFF
2007-10-01
TLP4202G
IF – Ta
ION – Ta
160
Allowable on-state current ION (mA)
Allowable forward current
IF (mA)
100
80
60
40
20
0
−20
0
20
40
60
80
100
120
80
40
0
−20
120
Ambient temperature Ta (°C)
0
20
40
60
80
100
120
Ambient temperature Ta (°C)
IF – V F
100
Ta = 25°C
Forward current IF
(mA)
30
10
3
1
0.3
0.1
0.6
0.8
1
1.2
1.4
Forward voltage VF
1.6
1.8
(V)
4
2007-10-01
TLP4202G
RON – Ta
IFC – Ta
50
5
ION = 90 mA
t<1s
Trigger LED current IFC (mA)
On-state resistance RON (Ω)
ION = 90 mA
40
30
20
10
0
−40
−20
0
20
40
60
80
t<1s
4
3
2
1
0
−40
100
−20
Ambient temperature Ta (°C)
0
IOFF – Ta
80
100
ION – VON
Ta = 25°C
(mA)
300 IF = 5 mA
100
On-state current ION
(nA)
60
150
VOFF = 350 V
Off-state current IOFF
40
Ambient temperature Ta (°C)
1000
30
10
3
1
0
20
20
40
60
80
100
50
0
−50
−100
−150
−4
100
−3
Ambient temperature Ta (°C)
−2
−1
0
1
On-state voltage VON
2
3
4
(V)
tON, tOFF – IF
3000
tON, tOFF – Ta
Ta = 25°C
3000
VDD = 20 V, RL = 200 Ω
(μs)
tON
300
Switching time tON, tOFF
Switching time tON, tOFF
(μs)
VDD = 20 V, RL = 200 Ω
1000
100
30
10
1
tOFF
3
5
10
Input current
30
50
100
IF = 5 mA
300
IF (mA)
tON
100
30
10
−40
300
tOFF
1000
−20
0
20
40
60
80
100
Ambient temperature Ta (°C)
5
2007-10-01
TLP4202G
RESTRICTIONS ON PRODUCT USE
20070701-EN
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break,
cut, crush or dissolve chemically.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
6
2007-10-01