TOREX XC6701D182JR

XC6701 Series
ETR0334-003
28V Operation High Speed Voltage Regulators with Stand-by Function
■GENERAL DESCRIPTION
The XC6701 series are positive voltage regulator ICs manufactured using CMOS process with 28V of operation voltage.
The series consists of a voltage reference, an error amplifier, a current limiter, a thermal shutdown circuit and a phase
compensation circuit plus a driver transistor.
The output voltage is selectable in 0.1V increments within the range of 1.8V to 18V which fixed by laser trimming
technologies. The output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors.
The over current protection circuit and the thermal shutdown circuit are built-in. These two protection circuits will operate
when the output current reaches current limit level or the junction temperature reaches temperature limit level.
The CE function enables the output to be turned off and the IC becomes a stand-by mode resulting in greatly reduced power
consumption. Packages are selectable depending on the applications from SOT-25, SOT-89, SOT-89-5, USP-6C, SOT-223,
and TO-252.
■FEATURES
■APPLICATIONS
Max Output Current
●Car audio, Car navigation systems
●Note book computers, PDAs
●Home appliances
●Audio visuals, Digital cameras, Video cameras
●Cordless phones, Wireless communication
■ TYPICAL APPLICATION CIRCUITS
: More than 150mA (200mA limit)
(VIN=VOUT(T)+3.0V)
Dropout Voltage
: 300mV@IOUT=20mA
Input Voltage Range
: 2.0V~28.0V
Output Voltage Range
: 1.8V~18.0V (100mV increments)
High Accuracy
:±2%
Low Power Consumption : 50μA (VOUT(T)=5.0V)
Stand-by Current
: Less than 0.1μA
High Ripple Rejection
: 50dB@1kHz
Operating Temperature
: -40℃~+85℃
Low ESR Capacitor
: Ceramic Capacitor Compatible
(Internal Phase Compensation)
Small Packages
: SOT-25, SOT-89, SOT-89-5,
USP-6C, SOT-223, TO-252
■ TYPICAL PERFORMANCE
CHARACTERISTICS
XC6701B/D 502
VIN=7.0V, tr=tf=5μs
CIN=CL =1.0μF (ceramic), Ta=25℃
5.6
150
1μF
5.2
5.0
4.8
120
Output Voltage
90
4.6
4.4
60
4.2
4.0
Output Current
30
Output Current: IOUT (mA)
1μF
Output Voltage: VOUT (V)
5.4
3.8
3.6
0
Time (1ms/div)
1/32
XC6701 Series
■PIN CONFIGURATION
SOT-25
(TOP VIEW)
SOT-89
(TOP VIEW)
SOT-89-5
(TOP VIEW)
USP-6C
(BOTTOM VIEW)
* The dissipation pad for the USP-6C
package should be solder-plated in
recommended mount pattern and
metal masking so as to enhance
mounting strength and heat release.
If the pad needs to be connected to
other pins, it should be connected to
the VSS (No. 5) pin.
SOT-223
(TOP VIEW)
TO-252
(TOP VIEW)
■PIN ASSIGNMENT
●XC6701B Series
SOT-25
PIN NUMBER
SOT-89-5
USP-6C
1
2
3
4
5
5
2
4
3
1
6
5
2, 4
3
1
PIN NUMBER
SOT-223
TO-252
PIN NAME
FUNCTIONS
VIN
VSS
NC
CE
VOUT
Power Input
Ground
No connection
ON/OFF Control
Output
PIN NAME
FUNCTIONS
VIN
VSS
VOUT
Power Input
Ground
Output
●XC6701D Series
SOT-89
3
2
1
2/32
3
2
1
1
2
3
XC6701
Series
■ PRODUCT CLASSIFICATION
●Ordering Information
XC6701①②③④⑤⑥
DESIGNATOR
DESCRIPTION
SYMBOL
Type and Options of
Regulators
B
: Fixed output voltage with CE function (High Active)
①
D
: Fixed output voltage with no CE function
②③
④
18 ~ 99
: For the voltage within 1.8V ~9.9V;
e.g. 2.5V ⇒ 25
5.0V ⇒ 50
A ~ H, J
: For the voltage above 10.0V;
e.g. 11.6V ⇒ B6
15.2V ⇒ F2
18.0V ⇒ J0
Output Voltage
Output Voltage
Accuracy
⑤
Packages
⑥
Device Orientation
DESCRIPTION
2
: Output voltage 100mV increments, within ±2% accuracy
e.g. 2.5V ⇒ ②=2, ③=5, ④=2
M
P
P
E
F
J
R
L
: SOT-25 ( for B type only)
: SOT-89 (for D type only)
: SOT-89-5 (for B type only)
: USP-6C (for B type only)
: SOT-223 (for D type only)
: TO-252 (for D type only)
: Embossed tape, standard feed
: Embossed tape, reverse feed
3/32
XC6701 Series
■ BLOCK DIAGRAMS
●XC6701B Series
(SOT-25, SOT-89-5, USP-6C)
●XC6701D Series
(SOT-89, SOT-223, TO-252)
R1
R1
R2
R2
■ABSOLUTE MAXIMUM RATINGS
●XC6701B Series
PARAMETER
SYMBOL
RATINGS
UNIT
Input Voltage
Output Current
Output Voltage
CE Input Voltage
VIN
IOUT
VOUT
VCE
VSS-0.3~30
300 (*1)
VSS-0.3~VIN+0.3
VSS-0.3~30
250
V
mA
V
V
SOT-25
Power Dissipation
SOT-89-5
600(wiring on the PCB) *2
Pd
mW
(TJ=25℃)
100
USP-6C
Operating Temperature Range
Storage Temperature Range
500
1300(wiring on the PCB) *2
1000(wiring on the PCB) *2
Topr
Tstg
-40~+85
-55~+125
℃
℃
*1: IOUT≦Pd / (VIN-VOUT)
*2: The values of power dissipation is a reference data at wiring on the PCB.
Please see the condition in page 27.
●XC6701D Series
PARAMETER
Input Voltage
Output Current
Output Voltage
SOT-89
Power Dissipation
SOT-223
TO-252
Operating Temperature Range
Storage Temperature Range
SYMBOL
RATINGS
UNIT
VIN
IOUT
VOUT
VSS-0.3~30
300 (*1)
VSS-0.3~VIN+0.3
500
300
V
mA
V
Pd
Topr
Tstg
1500(wiring on the PCB) *2
mW
(TJ=25℃)
500
-40~+85
-55~+125
℃
℃
*1: IOUT≦Pd / (VIN-VOUT)
*2: The values of power dissipation is a reference data at wiring on the PCB.
4/32
Please see the condition in page 27.
XC6701
Series
■ELECTRICAL CHARACTERISTICS
●XC6701B Series
PARAMETER
SYMBOL
Output Voltage
VOUT(E)
Maximum Output Current
IOUTMAX
△VOUT
Load Regulation
CONDITIONS
MIN.
IOUT=10mA, VCE=VIN
VIN= VOUT(T)+3.0V , VCE=VIN
(VOUT(T)≧3.0V)
VIN=VOUT(T)+3.0V, VCE=VIN
(VOUT(T)<3.0V)
1mA≦IOUT≦50mA , VCE=VIN
1.8V≦VOUT(T)≦5.0V
1mA≦IOUT≦50mA , VCE=VIN
5.1V≦VOUT(T)≦12.0V
1mA≦IOUT≦50mA , VCE=VIN
12.1V≦VOUT(T)≦18.0V
Ta=+25℃
TYP.
MAX.
E-0
UNIT
CIRCUIT
V
①
150
-
-
mA
①
100
-
-
mA
①
-
50
90
-
110
175
mV
①
-
180
275
Dropout Voltage 1
Vdif1
IOUT=20mA, VCE=VIN
E-2
mV
①
Dropout Voltage 2
Vdif2
IOUT=100mA ,VCE=VIN
E-3
mV
①
1.8V≦VOUT(T)≦5.0V
11
50
105
Supply Current
ISS
5.1V≦VOUT(T)≦12.0V
11
60
115
μA
②
12.1V≦VOUT(T)≦18.0V
11
65
125
Istby
VCE=VSS
-
0.01
0.10
μA
②
△VOUT /
△VIN・VOUT(T)
△VOUT /
△VIN・VOUT(T)
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=5mA , VCE=VIN
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=13mA , VCE=VIN
-
0.05
0.10
%/V
①
-
0.15
0.30
%/V
①
2.0
-
28.0
V
-
-
±100
-
ppm/℃
①
-
50
-
dB
③
Stand-by Current
Line Regulation 1
Line Regulation 2
Input Voltage
VIN
Output Voltage
△VOUT /
Temperature Characteristics △Ta・VOUT(T)
Ripple Rejection Rate
PSRR
IOUT=20mA, VCE=VIN
-40℃≦Ta≦85℃
VIN=[VOUT(T)+2.0V]+0.5Vp-pAC
IOUT=20mA , f=1kHz , VCE=VIN
Short Current
Ishort
VIN=VOUT(T)+2.0V , VCE=VIN
-
40
-
mA
①
CE ”H” Level Voltage
VCEH
VIN=28.0V
1.1
-
VIN
V
①
CE ”L” Level Voltage
VCEL
VIN=28.0V
0
-
0.35
V
①
CE ”H” Level Current
ICEH
VIN=VCE=28.0V
-0.1
-
0.1
μA
①
CE ”L” Level Current
ICEL
VIN=28.0V, VCE=VSS
-0.1
-
0.1
μA
①
TTSD
Junction Temperature
-
150
-
℃
①
TTSR
Junction Temperature
-
125
-
℃
①
TTSD-TTSR
Junction Temperature
-
25
-
℃
-
Thermal Shutdown
Detect Temperature
Thermal Shutdown Release
Temperature
Hysteresis Width
NOTE:
*1: VOUT(T): Specified output voltage
*2: VOUT(E): Effective output voltage
(i.e. the output voltage when “VOUT(T)+2.0V” is provided at the VIN pin while maintaining a certain IOUT value.)
*3: Vdif={VIN1
{Note 5}
- VOUT1
{Note 4}
}
*4: VOUT1: A voltage equal to 98% of the output voltage whenever an amply stabilized when VOUT(T) < 3.0V, IOUT{VOUT(T)+3.0V} is input.
: A voltage equal to 98% of the output voltage whenever an amply stabilized when VOUT(T)≧3.0V, IOUT{VOUT(T)+2.0V} is input.
*5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased.
*6: Unless otherwise stated, VIN=VOUT(T)+2.0V.
5/32
XC6701 Series
■ELECTRICAL CHARACTERISTICS (Continued)
●XC6701D Series
Ta=+25℃
PARAMETER
SYMBOL
CONDITIONS
MIN.
Output Voltage
VOUT(E)
Maximum Output Current
IOUTMAX
△VOUT
Load Regulation
IOUT=10mA
VIN= VOUT(T)+3.0V
(VOUT(T)≧3.0V)
VIN=VOUT(T)+3.0V
(VOUT(T)<3.0V )
1mA≦IOUT≦50mA
1.8V≦VOUT(T)≦5.0V
1mA≦IOUT≦50mA
5.1V≦VOUT(T)≦12.0V
1mA≦IOUT≦50mA
12.1V≦VOUT(T)≦18.0V
TYP.
UNIT
CIRCUIT
V
①
MAX.
E-0
150
-
-
mA
①
100
-
-
mA
①
-
50
90
-
110
175
mV
①
-
180
275
Dropout Voltage1
Vdif1
IOUT=20mA
E-2
mV
①
Dropout Voltage2
Vdif2
IOUT =100mA , VCE=VIN
E-3
mV
①
1.8V≦VOUT(T)≦5.0V
11
50
105
μA
②
Supply Current
ISS
5.1V≦VOUT(T)≦12.0V
12.1V≦VOUT(T)≦18.0V
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=5mA
VOUT(T)+2.0V≦VIN≦28.0V
IOUT=13mA
11
11
60
65
115
125
μA
②
-
0.05
0.10
%/V
①
-
0.15
0.30
%/V
①
2.0
-
28.0
V
-
-
±100
-
ppm/℃
①
-
50
-
dB
③
△VOUT /
△VIN・VOUT(T)
△VOUT /
△VIN・VOUT(T)
Line Regulation1
Line Regulation2
Input Voltage
VIN
Output Voltage
△VOUT /
Temperature Characteristics △Ta・VOUT(T)
IOUT=20mA
-40℃≦Ta≦85℃
VIN=[VOUT(T)+2.0V]+0.5Vp-pAC
IOUT=20mA , f=1kHz
Ripple Rejection Rate
PSRR
Short Current
Ishort
VIN=VOUT(T)+2.0V
-
40
-
mA
①
TTSD
Junction Temperature
-
150
-
℃
①
TTSR
Junction Temperature
-
125
-
℃
①
TTSD-TTSR
Junction Temperature
-
25
-
℃
-
Thermal Shutdown Detect
Temperature
Thermal Shutdown Release
Temperature
Hysteresis Width
NOTE:
*1: VOUT(T): Specified output voltage
*2: VOUT(E): Effective output voltage
(i.e. the output voltage when “VOUT(T)+2.0V” is provided at the VIN pin while maintaining a certain IOUT value.)
*3: Vdif={VIN1
{Note 5}
- VOUT1
{Note 4}
}
*4: VOUT1: A voltage equal to 98% of the output voltage whenever an amply stabilized when VOUT(T) < 3.0V, IOUT{VOUT(T)+3.0V} is input.
: A voltage equal to 98% of the output voltage whenever an amply stabilized when VOUT(T)≧3.0V, IOUT{VOUT(T)+2.0V} is input.
*5: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased.
*6: Unless otherwise stated, VIN=VOUT(T)+2.0V.
6/32
XC6701
Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart
SYMBOL
E-0
E-2
E-3
DROPOUT VOLTAGE 1
(mV)
IOUT=20mA
DROPOUT VOLTAGE 2
(mV)
IOUT=100mA
PARAMETER
OUTPUT VOLTAGE(V)
SETTING
OUTPUT
VOLTAGE (V)
(2% products)
VOUT(T)
VOUT
Vdif1
Vdif2
(V)
MIN.
MAX.
TYP.
MAX.
TYP.
MAX.
1.8
1.764
1.836
550
710
2200
2700
1.9
1.862
1.938
550
710
2200
2700
2.0
1.960
2.040
450
600
1900
2600
2.1
2.058
2.142
450
600
1900
2600
2.2
2.156
2.244
390
520
1700
2200
2.3
2.254
2.346
390
520
1700
2200
2.4
2.352
2.448
390
520
1700
2200
2.5
2.450
2.550
310
450
1500
1900
2.6
2.548
2.652
310
450
1500
1900
2.7
2.646
2.754
310
450
1500
1900
2.8
2.744
2.856
310
450
1500
1900
2.9
2.842
2.958
310
450
1500
1900
3.0
2.940
3.060
260
360
1300
1700
3.1
3.038
3.162
260
360
1300
1700
3.2
3.136
3.264
260
360
1300
1700
3.3
3.234
3.366
260
360
1300
1700
3.4
3.332
3.468
260
360
1300
1700
3.5
3.430
3.570
260
360
1300
1700
3.6
3.528
3.672
260
360
1300
1700
3.7
3.626
3.774
260
360
1300
1700
3.8
3.724
3.876
260
360
1300
1700
3.9
3.822
3.978
260
360
1300
1700
4.0
3.920
4.080
220
320
1100
1500
4.1
4.018
4.182
220
320
1100
1500
4.2
4.116
4.284
220
320
1100
1500
4.3
4.214
4.386
220
320
1100
1500
4.4
4.312
4.488
220
320
1100
1500
4.5
4.410
4.590
220
320
1100
1500
4.6
4.508
4.692
220
320
1100
1500
4.7
4.606
4.794
220
320
1100
1500
4.8
4.704
4.896
220
320
1100
1500
4.9
4.802
4.998
220
320
1100
1500
5.0
4.900
5.100
190
280
1000
1300
5.1
4.998
5.202
190
280
1000
1300
5.2
5.096
5.304
190
280
1000
1300
5.3
5.194
5.406
190
280
1000
1300
5.4
5.292
5.508
190
280
1000
1300
5.5
5.390
5.610
190
280
1000
1300
5.6
5.488
5.712
190
280
1000
1300
5.7
5.586
5.814
190
280
1000
1300
5.8
5.684
5.916
190
280
1000
1300
5.9
5.782
6.018
190
280
1000
1300
6.0
5.880
6.120
190
280
1000
1300
7/32
XC6701 Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart (Continued)
SYMBOL
E-0
E-2
E-3
DROPOUT VOLTAGE 1
(mV)
IOUT=20mA
DROPOUT VOLTAGE 2
(mV)
IOUT=100mA
PARAMETER
OUTPUT VOLTAGE(V)
SETTING
OUTPUT
VOLTAGE (V)
(2% products)
VOUT(T)
VOUT
Vdif1
Vdif2
(V)
MIN.
MAX.
TYP.
MAX.
TYP.
MAX.
6.1
5.978
6.222
190
280
1000
1300
6.2
6.076
6.324
190
280
1000
1300
6.3
6.174
6.426
190
280
1000
1300
6.4
6.272
6.528
190
280
1000
1300
6.5
6.370
6.630
170
230
800
1150
6.6
6.468
6.732
170
230
800
1150
6.7
6.566
6.834
170
230
800
1150
6.8
6.664
6.936
170
230
800
1150
6.9
6.762
7.038
170
230
800
1150
7.0
6.860
7.140
170
230
800
1150
7.1
6.958
7.242
170
230
800
1150
7.2
7.056
7.344
170
230
800
1150
7.3
7.154
7.446
170
230
800
1150
7.4
7.252
7.548
170
230
800
1150
7.5
7.350
7.650
170
230
800
1150
7.6
7.448
7.752
170
230
800
1150
7.7
7.546
7.854
170
230
800
1150
7.8
7.644
7.956
170
230
800
1150
7.9
7.742
8.058
170
230
800
1150
8.0
7.840
8.160
170
230
800
1150
8.1
7.938
8.262
130
190
700
950
8.2
8.036
8.364
130
190
700
950
8.3
8.134
8.466
130
190
700
950
8.4
8.232
8.568
130
190
700
950
8.5
8.330
8.670
130
190
700
950
8.6
8.428
8.772
130
190
700
950
8.7
8.526
8.874
130
190
700
950
8.8
8.624
8.976
130
190
700
950
8.9
8.722
9.078
130
190
700
950
9.0
8.820
9.180
130
190
700
950
9.1
8.918
9.282
130
190
700
950
9.2
9.016
9.384
130
190
700
950
9.3
9.114
9.486
130
190
700
950
9.4
9.212
9.588
130
190
700
950
9.5
9.310
9.690
130
190
700
950
9.6
9.408
9.792
130
190
700
950
9.7
9.506
9.894
130
190
700
950
9.8
9.604
9.996
130
190
700
950
9.9
9.702
10.098
130
190
700
950
10.0
9.800
10.200
130
190
700
950
8/32
XC6701
Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart (Continued)
SYMBOL
E-0
E-1
E-2
DROPOUT VOLTAGE 1
(mV)
IOUT=20mA
DROPOUT VOLTAGE 2
(mV)
IOUT=100mA
PARAMETER
OUTPUT VOLTAGE(V)
SETTING
OUTPUT
VOLTAGE (V)
(2% products)
VOUT(T)
VOUT
Vdif1
Vdif2
(V)
MIN.
MAX.
TYP.
MAX.
TYP.
MAX.
10.1
9.898
10.302
120
170
650
850
10.2
9.996
10.404
120
170
650
850
10.3
10.094
10.506
120
170
650
850
10.4
10.192
10.608
120
170
650
850
10.5
10.290
10.710
120
170
650
850
10.6
10.388
10.812
120
170
650
850
10.7
10.486
10.914
120
170
650
850
10.8
10.584
11.016
120
170
650
850
10.9
10.682
11.118
120
170
650
850
11.0
10.780
11.220
120
170
650
850
11.1
10.878
11.322
120
170
650
850
11.2
10.976
11.424
120
170
650
850
11.3
11.074
11.526
120
170
650
850
11.4
11.172
11.628
120
170
650
850
11.5
11.270
11.730
120
170
650
850
11.6
11.368
11.832
120
170
650
850
11.7
11.466
11.934
120
170
650
850
11.8
11.564
12.036
120
170
650
850
11.9
11.662
12.138
120
170
650
850
12.0
11.760
12.240
120
170
650
850
12.1
11.858
12.342
120
170
650
850
12.2
11.956
12.444
120
170
650
850
12.3
12.054
12.546
120
170
650
850
12.4
12.152
12.648
120
170
650
850
12.5
12.250
12.750
120
170
650
850
12.6
12.348
12.852
120
170
650
850
12.7
12.446
12.954
120
170
650
850
12.8
12.544
13.056
120
170
650
850
12.9
12.642
13.158
120
170
650
850
13.0
12.740
13.260
120
170
650
850
13.1
12.838
13.362
120
170
650
850
13.2
12.936
13.464
120
170
650
850
13.3
13.034
13.566
120
170
650
850
13.4
13.132
13.668
120
170
650
850
13.5
13.230
13.770
120
170
650
850
13.6
13.328
13.872
120
170
650
850
13.7
13.426
13.974
120
170
650
850
13.8
13.524
14.076
120
170
650
850
13.9
13.622
14.178
120
170
650
850
14.0
13.720
14.280
120
170
650
850
9/32
XC6701 Series
■OUTPUT VOLTAGE CHART (Continued)
●Voltage Chart (Continued)
SYMBOL
E-0
E-1
E-2
DROPOUT VOLTAGE 1
(mV)
IOUT=20mA
DROPOUT VOLTAGE 2
(mV)
IOUT=100mA
PARAMETER
OUTPUT VOLTAGE(V)
SETTING
OUTPUT
VOLTAGE (V)
(2% products)
VOUT(T)
VOUT
Vdif1
Vdif2
(V)
MIN.
MAX.
TYP.
MAX.
TYP.
MAX.
14.1
13.818
14.382
120
170
650
850
14.2
13.916
14.484
120
170
650
850
14.3
14.014
14.586
120
170
650
850
14.4
14.112
14.688
120
170
650
850
14.5
14.210
14.790
120
170
650
850
14.6
14.308
14.892
120
170
650
850
14.7
14.406
14.994
120
170
650
850
14.8
14.504
15.096
120
170
650
850
14.9
14.602
15.198
120
170
650
850
15.0
14.700
15.300
120
170
650
850
15.1
14.798
15.402
120
170
650
850
15.2
14.896
15.504
120
170
650
850
15.3
14.994
15.606
120
170
650
850
15.4
15.092
15.708
120
170
650
850
15.5
15.190
15.810
120
170
650
850
15.6
15.288
15.912
120
170
650
850
15.7
15.386
16.014
120
170
650
850
15.8
15.484
16.116
120
170
650
850
15.9
15.582
16.218
120
170
650
850
16.0
15.680
16.320
120
170
650
850
16.1
15.778
16.422
120
170
650
850
16.2
15.876
16.524
120
170
650
850
16.3
15.974
16.626
120
170
650
850
16.4
16.072
16.728
120
170
650
850
16.5
16.170
16.830
120
170
650
850
16.6
16.268
16.932
120
170
650
850
16.7
16.366
17.034
120
170
650
850
16.8
16.464
17.136
120
170
650
850
16.9
16.562
17.238
120
170
650
850
17.0
16.660
17.340
120
170
650
850
17.1
16.758
17.442
120
170
650
850
17.2
16.856
17.544
120
170
650
850
17.3
16.954
17.646
120
170
650
850
17.4
17.052
17.748
120
170
650
850
17.5
17.150
17.850
120
170
650
850
17.6
17.248
17.952
120
170
650
850
17.7
17.346
18.054
120
170
650
850
17.8
17.444
18.156
120
170
650
850
17.9
17.542
18.258
120
170
650
850
18.0
17.640
18.360
120
170
650
850
10/32
XC6701
Series
■ OPERATIONAL EXPLANATION
R1
R2
<Output Voltage Control>
The voltage divided by resistors R1 & R2 is compared with the internal reference voltage by the error amplifier. The
P-channel MOSFET, which is connected to the VOUT pin, is then driven by the subsequent output signal. The output
voltage at the VOUT pin is controlled and stabilized by a system of negative feedback. The current limit circuit and short
protect circuit operate in relation to the level of output current and heat dissipation. Further, the IC’s internal circuitry can
be shutdown via the CE pin’s signal.
<Short-Circuit Protection>
The XC6701 series includes a current fold-back circuit as a short circuit protection. When the load current reaches the
current limit level, the current fold-back circuit operates and output voltage drops. The output voltage drops further and
output current decreases. When the output pin is shorted, a current of about 30mA flows.
<CE Pin>
The IC’s internal circuitry can be shutdown via the signal from the CE pin with the XC6701B series. In shutdown mode,
output at the VOUT pin will be pulled down by R1 and R2 to the VSS level. Note that as the XC6701B series’ operations will
become unstable with the CE pin open. We suggest that you use this IC with either a VIN voltage or a VSS voltage input at
the CE pin. If this IC is used with the correct specifications for the CE pin, the operational logic is fixed and the IC will
operate normally. However, supply current may increase as a result of through current in the IC’s internal circuitry if a
medium voltage is applied.
<Thermal Shutdown>
When the junction temperature of the built-in driver transistor reaches the temperature limit level (150℃ TYP.), the thermal
shutdown circuit operates and the driver transistor will be set to OFF. The IC resumes its operation when the thermal
shutdown function is released and the IC’s operation is automatically restored because the junction temperature drops to
the level of the thermal shutdown release voltage.
<Minimum Operating Voltage>
For the stable operation of the IC, over 2.0V of input voltage is necessary. The output voltage may not be generated
normally if the input voltage is less than 2.0V.
■ NOTES ON USE
1. Please use this IC within the stated absolute maximum ratings. The IC is liable to malfunction should the ratings be
exceeded.
2. Where wiring impedance is high, operations may become unstable due to the noise and/or phase lag depending on output
current. Please strengthen VIN and VSS wiring in particular.
3. Phase compensation inside the IC is performed in the XC6701 series. Therefore, an abnormal oscillation does not occur
even if there is no output capacitor CL. An input capacitor CIN around 0.1μF~1.0μF between the VIN pin and the VSS pin
is required for input stability. Also, the output voltage fluctuation such as under shoot or over shoot, which occurs
because of the load change can be controlled by placing the output capacitor CL around 0.1μF~1.0μF between the VOUT
pin and VSS pin. The input capacitor (CIN) and the output capacitor (CL) should be placed to the IC as close as possible
with a shorter wiring.
4.
When the IC is operated with no load, the output voltage may increase in the high temperature beyond operating
range.
11/32
XC6701 Series
■ TEST CIRCUITS
Circuit ①
●XC6701B Series
●XC6701D Series
CIN=1μF
CIN=1μF
CL=1μF
CL=1μF
Circuit ②
●XC6701B Series
●XC6701D Series
CIN=1μF
CIN=1μF
Circuit ③
●XC6701B Series
●XC6701D Series
CL=1μF
12/32
CL=1μF
XC6701
Series
■ TYPICAL PERFORMANCE CHARACTERISTICS
(1) Output Voltage vs. Output Current
XC6701B/D 182
2.0
VIN=VCE, CIN=CL =1.0μF (ceramic), Ta=25℃
2.0
1.8
1.8
1.6
1.6
1.4
1.2
1.0
0.8
0.6
Ta=-40℃
Ta=25℃
Ta=85℃
0.4
0.2
Output Voltage : VOUT (V)
Output Voltage : VOUT (V)
XC6701B/D 182
VIN=VCE=4.8V, CIN=CL =1.0μF (ceramic)
1.4
1.2
1.0
0.8
0.6
VIN=2.8V
VIN=3.8V
VIN=4.8V
0.4
0.2
0.0
0.0
0
50
100 150 200 250
Output Current : IOUT (mA)
0
300
50
100 150 200 250
Output Current : IOUT (mA)
XC6701B/D 502
XC6701B/D 502
VIN=VCE=8.0V, CIN=CL =1.0μF (ceramic)
6.0
5.0
4.0
3.0
2.0
Ta=-40℃
Ta=25℃
Ta=85℃
1.0
0.0
0
50
100 150 200 250
Output Current : IOUT (mA)
Output Voltage : VOUT (V)
Output Voltage : VOUT (V)
VIN=VCE, CIN=CL =1.0μF (ceramic), Ta=25℃
6.0
5.0
4.0
3.0
2.0
VIN=6V
VIN=7V
VIN=8V
1.0
0.0
300
0
50
100 150 200 250
Output Current : IOUT (mA)
XC6701B/D C02
300
XC6701B/D C02
VIN=VCE=15.0V, CIN=CL =1.0μF (ceramic)
14.0
VIN=VCE, CIN=CL =1.0μF (ceramic), Ta=25℃
14.0
12.0
12.0
10.0
Output Voltage : VOUT (V)
Output Voltage : VOUT (V)
300
Ta=-40℃
Ta=25℃
Ta=85℃
8.0
6.0
4.0
10.0
VIN=13V
VIN=14V
VIN=15V
8.0
6.0
4.0
2.0
2.0
0.0
0.0
0
50
100 150 200 250
Output Current : IOUT (mA)
300
0
50
100 150 200 250
Output Current : IOUT (mA)
300
13/32
XC6701 Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(1) Output Voltage vs. Output Current (Continued)
XC6701B/D J02
XC6701B/D J02
VIN=VCE=21.0, CIN=CL =1.0μF (ceramic)
20.0
18.0
16.0
Ta=-40℃
Ta=25℃
Ta=85℃
14.0
12.0
Output Voltage : VOUT (V)
Output Voltage : VOUT (V)
VIN=VCE, CIN=CL =1.0μF (ceramic), Ta=25℃
20.0
18.0
10.0
8.0
6.0
4.0
2.0
16.0
14.0
VIN=19V
VIN=20V
VIN=21V
12.0
10.0
8.0
6.0
4.0
2.0
0.0
0.0
0
50
100 150 200 250
Output Current : IOUT (mA)
300
0
50
100 150 200 250
Output Current : IOUT (mA)
300
(2) Output Voltage vs. Input Voltage
XC6701B/D 182
XC6701B/D 182
VIN=VCE, CIN=CL =1.0μF(ceramic), Ta=25℃
2.1
2.0
Output Voltage : VOUT (V)
Output Voltage : VOUT (V)
2.1
1.9
1.8
1.7
IOUT=1mA
IOUT=10mA
IOUT=30mA
1.6
VIN=VCE, CIN=CL =1.0μF(ceramic),Ta=25℃
2.0
1.9
1.8
1.7
IOUT=1mA
IOUT=10mA
IOUT=30mA
1.6
1.5
1.5
0.8
1.8
2.8
4
3.8
8
24
28
VIN=VCE, CIN=CL =1.0μF(ceramic), Ta=25℃
VIN=VCE, CIN=CL =1.0μF(ceramic), Ta=25℃
6.0
5.8
5.8
5.6
5.6
5.4
Output Voltage : VOUT (V)
Output Voltage : VOUT (V)
20
XC6701B/D 502
XC6701B/D 502
5.4
5.2
5.2
5.0
5.0
4.8
4.8
4.6
IOUT=1mA
IOUT=10mA
IOUT=30mA
4.4
4.2
4.0
4.0
4.5
5.0
5.5
Input Voltage : VIN (V)
14/32
16
Input Voltage : VIN (V)
Input Voltage : VIN (V)
6.0
12
6.0
4.6
IOUT=1mA
IOUT=10mA
IOUT=30mA
4.4
4.2
4.0
8
12
16
20
24
Input Voltage : VIN (V)
28
XC6701
Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(2) Output Voltage vs. Input Voltage (Continued)
XC6701B/D C02
XC6701B/D C02
VIN=VCE, CIN=CL =1.0μF(ceramic), Ta=25℃
15.0
Output Voltage : VOUT (V)
Output Voltage : VOUT (V)
14.0
13.0
12.0
11.0
IOUT=1mA
IOUT=10mA
IOUT=30mA
10.0
VIN=VCE, CIN=CL =1.0μF(ceramic), Ta=25℃
15.0
14.0
13.0
12.0
11.0
IOUT=1mA
IOUT=10mA
IOUT=30mA
10.0
9.0
14
9.0
10
11
12
13
16
14
18
20
22
24
26
28
Input Voltage : VIN (V)
Input Voltage : VIN (V)
XC6701B/D J02
XC6701B/D J02
VIN=VCE, CIN=CL =1.0μF(ceramic), Ta=25℃
21.0
20.0
Output Voltage : VOUT (V)
Output Voltage : VOUT (V)
21.0
19.0
18.0
17.0
IOUT=1mA
IOUT=10mA
IOUT=30mA
16.0
VIN=VCE, CIN=CL =1.0μF(ceramic), Ta=25℃
20.0
19.0
18.0
17.0
IOUT=1mA
IOUT=10mA
IOUT=30mA
16.0
15.0
15.0
16
17
18
19
20
20
22
24
26
28
Input Voltage : VIN (V)
Input Voltage : VIN (V)
(3) Dropout Voltage vs. Output Current
XC6701B/D 182
4.0
Ta=85℃
Ta=25℃
Ta=-40℃
3.0
VIN=VCE, CIN=CL =1.0μF(ceramic)
4.0
Ta=85℃
Ta=25℃
Ta=-40℃
3.5
Dropout Voltage : VDIF (V)
3.5
Dropout Voltage : VDIF (V)
XC6701B/D 502
VIN=VCE, CIN=CL =1.0μF(ceramic)
2.5
2.0
1.5
1.0
0.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
0.0
0
25
50
75
100
125
Output Current : IOUT (mA)
150
0
25
50
75
100
125
Output Current : IOUT (mA)
150
15/32
XC6701 Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(3) Dropout Voltage vs. Output Current (Continued)
XC6701B/D C02
4.0
Ta=85℃
Ta=25℃
Ta=-40℃
3.5
Dropout Voltage : VDIF (V)
3.0
VIN=VCE, CIN=CL =1.0μF(ceramic)
4.0
Ta=85℃
Ta=25℃
Ta=-40℃
3.5
Dropout Voltage : VDIF (V)
XC6701B/D J02
VIN=VCE, CIN=CL =1.0μF(ceramic)
2.5
2.0
1.5
1.0
0.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
0.0
0
25
50
75
100
125
0
150
25
50
75
100
125
150
Output Current : IOUT (mA)
Output Current : IOUT (mA)
(4) Supply Current vs. Input Voltage
XC6701B/D 182
70
70
60
60
Supply Current : ISS (uA)
Supply Current : ISS (uA)
XC6701B/D 182
50
40
30
20
Ta=85℃
Ta=25℃
Ta=-40℃
10
4
8
12
16
20
24
50
40
30
20
10
0
0
VIN=3.8V
0
-40
28
Input Voltage : VIN (V)
-20
0
60
60
Supply Current : ISS (uA)
Supply Current : ISS (uA)
70
50
40
30
Ta=85℃
Ta=25℃
Ta=-40℃
4
8
12
16
20
Input Voltage : VIN (V)
16/32
80
100
24
VIN=7.0V
50
40
30
20
10
0
0
60
XC6701B/D 502
70
10
40
Ambient Temperature : Ta (℃)
XC6701B/D 502
20
20
28
0
-40
-20
0
20
40
60
80
Ambient Temperature : Ta (℃)
100
XC6701
Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(4) Supply Current vs. Input Voltage (Continued)
XC6701B/D C02
70
70
60
60
50
40
30
20
Ta=85℃
Ta=25℃
Ta=-40℃
10
Supply Current : ISS (uA)
Supply Current : ISS (uA)
XC6701B/D C02
4
8
12
16
20
24
50
40
30
20
10
0
0
VIN=14.0V
0
-40
28
Input Voltage : VIN (V)
-20
0
70
70
60
60
50
40
30
20
Ta=85℃
Ta=25℃
Ta=-40℃
0
0
4
8
12
16
20
40
60
80
100
XC6701B/D J02
24
Supply Current : ISS (uA)
Supply Current : ISS (uA)
XC6701B/D J02
10
20
Ambient Temperature : Ta (℃)
VIN=20.0V
50
40
30
20
10
0
-40
28
Input Voltage : VIN (V)
-20
0
20
40
60
80
100
Ambient Temperature : Ta (℃)
(5) Output Voltage vs. Ambient Temperature
XC6701B/D 182
XC6701B/D 502
VIN=VCE, CIN=CL =1.0μF(ceramic)
VIN=VCE, CIN=CL =1.0μF(ceramic)
2.00
5.20
5.15
Output Voltage : VOUT (V)
Output Voltage : VOUT (V)
1.95
1.90
1.85
1.80
1.75
IOUT=1mA
IOUT=10mA
IOUT=20mA
1.70
1.65
5.10
5.05
5.00
4.95
4.90
IOUT=1mA
IOUT=10mA
IOUT=20mA
4.85
1.60
4.80
-50
-25
0
25
50
75
Ambient Temperature : Ta (℃)
100
-50
-25
0
25
50
75
Ambient Temperature : Ta (℃)
100
17/32
XC6701 Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(5)Output Voltage vs. Ambient Temperature (Continued)
XC6701B/D C02
12.5
12.4
18.8
12.3
18.6
12.2
12.1
12.0
11.9
11.8
IOUT=1mA
IOUT=10mA
IOUT=20mA
11.7
11.6
VIN=VCE, CIN=CL =1.0μF(ceramic)
19.0
Output Voltage : VOUT (V)
Output Voltage : VOUT (V)
XC6701B/D J02
VIN=VCE, CIN=CL =1.0μF(ceramic)
18.4
18.2
18.0
17.8
17.6
IOUT=1mA
IOUT=10mA
IOUT=20mA
17.4
17.2
11.5
17.0
-50
-25
0
25
50
75
Ambient Temperature : Ta (℃)
-50
100
-25
0
25
50
75
Ambient Temperature : Ta (℃)
100
(6) Input Transient Response
XC6701B/D 332
XC6701B/D 332
IOUT=30mA, tr=tf=5μs
3.36
6.3
5.3
3.34
4.3
3.32
3.3
Output Voltage
3.30
3.38
Input Voltage
3.36
5.3
3.34
4.3
3.32
3.3
Output Voltage
3.30
2.3
3.28
2.3
3.28
1.3
3.26
1.3
3.26
Time (1ms/div)
Time (1ms/div)
XC6701B/D 502
XC6701B/D 502
IOUT=1mA, tr=tf=5μs
Input Voltage
IOUT=30mA, tr=tf=5μs
5.08
9
5.06
8
7
5.04
6
5.02
5
5.00
Output Voltage
4
3
Time (1ms/div)
18/32
Input Voltage: VIN (V)
8
CL =1.0μF (ceramic), Ta=25℃
Output Voltage: VOUT (V)
9
Input Voltage: VIN (V)
CL =1.0μF (ceramic), Ta=25℃
CL =1.0μF (ceramic), Ta=25℃
Input Voltage
5.08
5.06
7
5.04
6
5.02
5
5.00
Output Voltage
4.98
4
4.96
3
4.98
4.96
Time (1ms/div)
Output Voltage: VOUT (V)
Input Voltage
7.3
Input Voltage: VIN (V)
Input Voltage: VIN (V)
6.3
3.38
Output Voltage: VOUT (V)
7.3
CL =1.0μF (ceramic), Ta=25℃
Output Voltage: VOUT (V)
IOUT=1mA, tr=tf=5μs
XC6701
Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(6) Input Transient Response (Continued)
XC6701B/D C02
XC6701B/D C02
IOUT=1mA, tr=tf=5μs
12.04
13
12.02
Output Voltage
10
22
21
12.00
12.04
13
12.02
12
11
11.96
10
Output Voltage
11.96
Time (1ms/div)
XC6701B/D J02
XC6701B/D J02
IOUT=1mA, tr=tf=5μs
IOUT=30mA, tr=tf=5μs
CL =1.0μF (ceramic), Ta=25℃
CL =1.0μF (ceramic), Ta=25℃
18.12
22
18.09
21
20
18.06
19
18.03
18
18.00
Output Voltage
17
16
12.00
11.98
Time (1ms/div)
Input Voltage
12.06
14
11.98
Input Voltage: VIN (V)
12
Input Voltage
12.08
Input Voltage
18.12
18.09
20
18.06
19
18.03
18
17.97
17
17.94
16
Time (1ms/div)
Output Voltage: VOUT (V)
15
CL =1.0μF (ceramic), Ta=25℃
Output Voltage
Output Voltage: VOUT (V)
12.06
14
11
Input Voltage: VIN (V)
16
Input Voltage: VIN (V)
Input Voltage
12.08
Output Voltage: VOUT (V)
Input Voltage: VIN (V)
15
IOUT=30mA, tr=tf=5μs
Output Voltage: VOUT (V)
16
CL =1.0μF (ceramic), Ta=25℃
18.00
17.97
17.94
Time (1ms/div)
(7) Load Transient Response
XC6701B/D 332
XC6701B/D 502
VIN=7.0V, tr=tf=5μs
CIN=CL =1.0μF (ceramic), Ta=25℃
5.4
150
120
3.3
Output Voltage
90
3.1
3.0
60
2.9
2.8
Output Current
30
2.7
Output Voltage: VOUT (V)
3.4
3.2
150
5.3
Output Current: IOUT (mA)
Output Voltage: VOUT (V)
3.5
5.2
120
5.1
5.0
4.9
90
Output Voltage
4.8
60
4.7
4.6
Output Current
30
Output Current: IOUT (mA)
3.6
VIN=5.3V, tr=tf=5μs
CIN=CL =1.0μF (ceramic), Ta=25℃
4.5
2.6
0
Time (1ms/div)
4.4
0
Time (1ms/div)
19/32
XC6701 Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(7) Load Transient Response (Continued)
XC6701B/D C02
XC6701B/D J02
VIN=14.0V, tr=tf=5μs
VIN=20.0V, tr=tf=5μs
18.6
150
Output Voltage
90
11.6
11.4
60
11.2
11.0
10.8
Output Current
10.6
30
Output Voltage: VOUT (V)
120
12.0
11.8
150
18.4
12.2
Output Current: IOUT (mA)
Output Voltage: VOUT (V)
12.4
CIN=CL =1.0μF (ceramic), Ta=25℃
18.2
18.0
17.8
Output Voltage
90
17.6
17.4
60
17.2
17.0
16.8
0
120
Output Current
16.6
Time (1ms/div)
30
Output Current: IOUT (mA)
12.6
CIN=CL =1.0μF (ceramic), Ta=25℃
0
Time (1ms/div)
(8) Rising Response Time
8
7
6
6
2
5
0
4
-2
Output Voltage
3
-4
2
-6
-8
4
-2
Output Voltage
-6
1
0
-8
0
XC6701B 502
VIN=7.0V, tr=5μs
IOUT=30mA, CL =1μF (ceramic), Ta=25℃
8
8
Input Voltage: VIN (V)
5
8
Input Voltage
4
7
6
2
5
Output Voltage
0
4
-2
3
-4
2
1
-6
1
0
-8
4
-2
3
-4
2
-6
-8
Time (1ms/div)
6
7
6
Output Voltage
3
1
Output Voltage: VOUT (V)
Input Voltage: VIN (V)
0
2
0
20/32
5
XC6701B 502
Input Voltage
6
2
Time (1ms/div)
4
2
7
Input Voltage
Time (1ms/div)
8
8
-4
VIN=7.0V, tr=5μs
IOUT=1mA, CL =1μF (ceramic), Ta=25℃
6
4
VIN=5.3V, tr=5μs
IO UT=30mA, CL =1μF (ceramic), Ta=25℃
0
Time (1ms/div)
Output Voltage: VOUT (V)
4
Input Voltage
8
Input Voltage: VIN (V)
Input Voltage: VIN (V)
6
XC6701B 332
Output Voltage: VOUT (V)
8
VIN=5.3V, tr=5μs
IO UT=1mA, CL =1μF (ceramic), Ta=25℃
Output Voltage: VOUT (V)
XC6701B 332
XC6701
Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(8) Rising Response Time (Continued)
XC6701B C02
XC6701B C02
VIN=14.0V, tr=5μs
VIN=14.0V, tr=5μs
18
IOUT=30mA, CL =1μF (ceramic), Ta=25℃
15
Output Voltage
0
9
-5
6
-10
-15
5
Output Voltage
9
-5
6
3
-10
3
0
-15
0
XC6701B J02
XC6701B J02
VIN=20.0V, tr=5μs
VIN=20.0V, tr=5μs
IOUT=1mA, CL =1μF (ceramic), Ta=25℃
IOUT=30mA, CL =1μF (ceramic), Ta=25℃
20
20
16
16
12
8
14
4
12
10
Input Voltage
-4
18
Output Voltage
16
8
14
4
12
0
10
Input Voltage
8
-8
6
-12
4
2
-16
2
0
-20
-8
6
-12
4
-20
20
-4
8
-16
Input Voltage: VIN (V)
18
12
Output Voltage
12
0
Time (1ms/div)
16
0
15
Time (1ms/div)
20
Input Voltage: VIN (V)
12
Input Voltage: VIN (V)
5
10
Output Voltage: VOUT (V)
15
Output Voltage: VOUT (V)
Input Voltage: VIN (V)
10
18
Input Voltage
Input Voltage
Output Voltage: VOUT (V)
15
Output Voltage: VOUT (V)
IOUT=1mA, CL =1μF (ceramic), Ta=25℃
0
Time (1ms/div)
Time (1ms/div)
(9) CE Rising Response Time
XC6701B 332
XC6701B 332
4
CE Input Voltage
8
8
7
6
7
6
2
5
0
4
-2
Output Voltage
3
-4
2
-6
-8
Time (1ms/div)
CEInput Voltage: VCE (V)
CEInput Voltage: VCE (V)
6
8
Output Voltage: VOUT (V)
8
IO UT=1mA, CL =1μF (ceramic),
Ta=25℃
Output
Voltage
4
CE Input Voltage
6
2
5
0
4
-2
Output Voltage
3
-4
2
1
-6
1
0
-8
Output Voltage: VOUT (V)
VIN=5.3V, tr=5μs
IOUT=30mA, CL =1μF (ceramic), Ta=25℃
VIN=5.3V, tr=5μs
0
Time (1ms/div)
21/32
XC6701 Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(9) CE Rising Response Time (Continued)
XC6701B 502
CE Input Voltage
4
8
7
6
6
5
Output Voltage
CE Input Voltage
4
6
2
-2
3
-4
2
1
-6
1
0
-8
-2
3
-4
2
-6
-8
0
Time (1ms/div)
Time (1ms/div)
XC6701B C02
XC6701B C02
VIN=14.0V, tr=5μs
IOUT=30mA, CL =1μF (ceramic), Ta=25℃
18
15
18
CE Input Voltage
15
5
Output Voltage
12
0
9
-5
6
-10
-15
CEInput Voltage: VCE (V)
CE Input Voltage
Output Voltage: VOUT (V)
CEInput Voltage: VCE (V)
10
10
15
5
Output Voltage
9
-5
6
3
-10
3
0
-15
0
Time (1ms/div)
XC6701B J02
XC6701B J02
VIN=20.0V, tr=5μs
IOUT=1mA, CL =1μF (ceramic), Ta=25℃
20
20
18
16
16
12
8
14
4
12
0
-4
CE Input Voltage
10
8
-8
6
-12
4
-16
-20
Time (1ms/div)
22/32
CEInput Voltage: VCE (V)
Output Voltage
12
VIN=20.0V, tr=5μs
IOUT=30mA, CL =1μF (ceramic), Ta=25℃
Output Voltage: VOUT (V)
CEInput Voltage: VCE (V)
16
12
0
Time (1ms/div)
20
5
Output Voltage
4
4
15
7
0
0
VIN=14.0V, tr=5μs
IOUT=1mA, CL =1μF (ceramic), Ta=25℃
8
Output Voltage: VOUT (V)
2
VIN=7.0V, tr=5μs
IOUT=30mA, CL =1μF (ceramic), Ta=25℃
20
Output Voltage
18
16
8
14
4
12
0
-4
CE Input Voltage
10
8
-8
6
-12
4
2
-16
2
0
-20
0
Time (1ms/div)
Output Voltage: VOUT (V)
CEInput Voltage: VCE (V)
6
8
CEInput Voltage: VCE (V)
8
Output Voltage: VOUT (V)
VIN=7.0V, tr=5μs
IOUT=1mA, CL =1μF (ceramic), Ta=25℃
Output Voltage: VOUT (V)
XC6701B 502
XC6701
Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(10) Ripple Rejection Rate
XC6701B/D 332
80
70
60
50
40
30
20
10
0
0.01
0.1
10
60
50
40
30
20
10
0.1
1
10
Ripple Frequency: f (kHz)
XC6701B/D 502
XC6701B/D 502
VIN=VCE=7.0Vdc+0.5Vp-p, IOUT=1mA
CL =1μF(ceramic),Ta=25℃
60
50
40
30
20
10
0.1
1
10
80
70
60
50
40
30
20
10
0
0.01
100
0.1
1
10
Ripple Frequency: f (kHz)
Ripple Frequency: f (kHz)
XC6701B/D C02
XC6701B/D C02
VIN=VCE=14.0Vdc+0.5Vp-p, IOUT=1mA
CL =1μF(ceramic),Ta=25℃
80
70
60
50
40
30
20
10
0.1
1
10
Ripple Frequency: f (kHz)
100
100
VIN=VCE=14.0Vdc+0.5Vp-p, IOUT=30mA
CL =1μF(ceramic),Ta=25℃
90
Ripple Rejection Rate: PSRR (dB)
90
100
VIN=VCE=7.0Vdc+0.5Vp-p, IOUT=30mA
CL =1μF(ceramic),Ta=25℃
90
Ripple Rejection Rate: PSRR (dB)
70
0
0.01
70
0
0.01
100
80
0
0.01
80
Ripple Frequency: f (kHz)
90
Ripple Rejection Rate: PSRR (dB)
1
VIN=VCE=5.3Vdc+0.5Vp-p, IOUT=30mA
CL =1μF(ceramic),Ta=25℃
90
Ripple Rejection Rate: PSRR (dB)
Ripple Rejection Rate: PSRR (dB)
90
Ripple Rejection Rate: PSRR (dB)
XC6701B/D 332
VIN=VCE=5.3Vdc+0.5Vp-p, IOUT=1mA
CL =1μF(ceramic),Ta=25℃
80
70
60
50
40
30
20
10
0
0.01
0.1
1
10
100
Ripple Frequency: f (kHz)
23/32
XC6701 Series
■ TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(10) Ripple Rejection Rate (Continued)
XC6701B/D J02
80
70
60
50
40
30
20
10
0
0.01
0.1
1
10
Ripple Frequency: f (kHz)
24/32
100
VIN=VCE=14.0Vdc+0.5Vp-p, IOUT=30mA
CL =1μF(ceramic),Ta=25℃
90
Ripple Rejection Rate: PSRR (dB)
90
Ripple Rejection Rate: PSRR (dB)
XC6701B/D J02
VIN=VCE=14.0Vdc+0.5Vp-p, IOUT=1mA
CL =1μF(ceramic),Ta=25℃
80
70
60
50
40
30
20
10
0
0.01
0.1
1
10
Ripple Frequency: f (kHz)
100
XC6701
Series
■PACKAGING INFORMATION
●SOT-89-5
●SOT-25
4.5±0.1
2.9±0 .2
1.6 -+ 00 .2.1 5
5
4
4
(0.4)
MIN 0 .2
3
+0.1
(0 .9 5 )
+ 0 .0 3
0.4 - 0 .0 2
Φ1.0
2.5±0.1
+0.2
-0.1
2
2 .8±0 .2
1 .6
1
2
5
0 .0 5±0 .0 5
0.42±0.06
0.42±0.06
5°
0.42±0.06
1.0±0.2
+0.1
-0.05
4.25±0.25
0.4
5°
0 .1 5 -0.05
1 .1 ±0.1
1 .1 5±0.1 5
1
2
1.0±0.2
1 .9±0 .2
3
+ 0 .0 3
0.42±0.06
0.47±0.06
8
°
1.5±0.1
(0.1)
8
°
0.4 - 0 .0 2
0.42±0.06
1.5±0.1
1.5±0.1
●SOT-89
●USP-6C
Note: The side of pins are not gilded, but nickel is used.
25/32
XC6701 Series
■PACKAGING INFORMATION (Continued)
●SOT-223
.
●TO-252
6. 55±0. 2
0. 5 ±0. 1
6. 1 ±0. 15
0. 85±0. 25
.
9. 9±0. 55
1. 1±0. 25
5. 3±0. 2
0. 75±0. 15
0. 5 ±0. 1
(2. 28)
26/32
(2. 28)
M I N4 . 32
0. 75±0. 15
0. 1
2. 3 -+0.
15
0. 75±0. 15
.
XC6701
Series
■PACKAGING INFORMATION (Continued)
●USP-6C Reference Pattern Layout
●USP-6C Reference Metal Mask Design
27/32
XC6701 Series
■PACKAGING INFORMATION (Continued)
●
SOT-25 Power Dissipation
Power dissipation data for the SOT-25 is shown in this page.
The value of power dissipation varies with the mount board conditions.
Please use this data as one of reference data taken in the described condition.
1.
Measurement Condition (Reference data)
Condition:
Mount on a board
Ambient:
Natural convection
Soldering:
Lead (Pb) free
Board:
Dimensions 40 x 40 mm (1600 mm in one side)
2
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
(Board of SOT-26 is used.)
Material:
Glass Epoxy (FR-4)
Thickness:
1.6 mm
Through-hole: 4 x 0.8 Diameter
評価基板レイアウト(単位:mm)
Evaluation Board (Unit: mm)
2.
Power Dissipation vs. Operating temperature
Board Mount (Tj max = 125℃)
Ambient Temperature(℃)
Power Dissipation Pd(mW)
25
600
85
240
Thermal Resistance (℃/W)
166.67
許容損失Pd(mW)
Power Dissipation Pd (mW)
Pd-Ta特性グラフ
Pd vs. Ta
700
600
500
400
300
200
100
0
25
28/32
45
65
85
Ambient
Temperature Ta (℃)
周辺温度Ta(℃)
105
125
XC6701
Series
■PACKAGING INFORMATION (Continued)
●
SOT-89-5 Power Dissipation
Power dissipation data for the SOT-89-5 is shown in this page.
The value of power dissipation varies with the mount board conditions.
Please use this data as one of reference data taken in the described condition.
1.
Measurement Condition (Reference data)
て
Condition:
Mount on a board
Ambient:
Natural convection
Soldering:
Lead (Pb) free
Board:
Dimensions 40 x 40 mm (1600 mm in one side)
2
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
Material:
Glass Epoxy (FR-4)
Thickness:
1.6 mm
Through-hole: 5 x 0.8 Diameter
Evaluation Board (Unit: mm)
Power Dissipation vs. Operating temperature
Board Mount (Tj max = 125℃)
Ambient Temperature(℃)
Power Dissipation Pd(mW)
25
1300
85
520
Thermal Resistance (℃/W)
76.92
Pd-Ta特性グラフ
Pd vs. Ta
許容損失Pd(mW)
Power
Dissipation Pd (mW)
2.
1400
1200
1000
800
600
400
200
0
25
45
65
85
105
125
Ambient
Temperature Ta (℃)
周辺温度Ta(℃)
29/32
XC6701 Series
■PACKAGING INFORMATION (Continued)
●
USP-6C Power Dissipation
Power dissipation data for the USP-6C is shown in this page.
The value of power dissipation varies with the mount board conditions.
Please use this data as one of reference data taken in the described condition.
1.
Measurement Condition (Reference data)
て
Condition:
Mount on a board
Ambient:
Natural convection
Soldering:
Lead (Pb) free
Board:
Dimensions 40 x 40 mm (1600 mm in one side)
2
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
Material:
Glass Epoxy (FR-4)
Thickness:
1.6 mm
Through-hole: 4 x 0.8 Diameter
2.
Evaluation Board (Unit: mm)
Power Dissipation vs. Operating temperature
Board Mount (Tj max = 125℃)
Ambient Temperature(℃)
Power Dissipation Pd(mW)
25
1000
85
400
Thermal Resistance (℃/W)
100.00
許容損失Pd(mW)
Power
Dissipation Pd (mW)
Pd-Ta特性グラフ
Pd vs. Ta
1200
1000
800
600
400
200
0
25
45
65
85
Ambient
Temperature Ta (℃)
周辺温度Ta(℃)
30/32
105
125
XC6701
Series
■PACKAGING INFORMATION (Continued)
●
SOT-223 Power Dissipation
Power dissipation data for the SOT-223 is shown in this page.
The value of power dissipation varies with the mount board conditions.
Please use this data as one of reference data taken in the described condition.
1.
Measurement Condition (Reference data)
Condition:
Mount on a board
Ambient:
Natural convection
Soldering:
Lead (Pb) free
Board:
Dimensions 40 x 40 mm (1600 mm in one side)
2
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
Material:
Glass Epoxy (FR-4)
Thickness:
1.6 mm
Through-hole: 4 x 0.8 Diameter
Evaluation Board (Unit: mm)
Power Dissipation vs. Operating temperature
Board Mount (Tj max = 125℃)
Ambient Temperature(℃)
Power Dissipation Pd(mW)
25
1500
85
600
Thermal Resistance (℃/W)
66.67
Pd-Ta特性グラフ
Pd vs. Ta
Power
Dissipation Pd (mW)
許容損失Pd(mW)
2.
1600
1400
1200
1000
800
600
400
200
0
25
45
65
85
Ambient周辺温度Ta(℃)
Temperature Ta (℃)
105
125
31/32
XC6701 Series
1. The products and product specifications contained herein are subject to change without
notice to improve performance characteristics.
Consult us, or our representatives
before use, to confirm that the information in this datasheet is up to date.
2. We assume no responsibility for any infringement of patents, patent rights, or other
rights arising from the use of any information and circuitry in this datasheet.
3. Please ensure suitable shipping controls (including fail-safe designs and aging
protection) are in force for equipment employing products listed in this datasheet.
4. The products in this datasheet are not developed, designed, or approved for use with
such equipment whose failure of malfunction can be reasonably expected to directly
endanger the life of, or cause significant injury to, the user.
(e.g. Atomic energy; aerospace; transport; combustion and associated safety
equipment thereof.)
5. Please use the products listed in this datasheet within the specified ranges.
Should you wish to use the products under conditions exceeding the specifications,
please consult us or our representatives.
6. We assume no responsibility for damage or loss due to abnormal use.
7. All rights reserved. No part of this datasheet may be copied or reproduced without the
prior permission of TOREX SEMICONDUCTOR LTD.
32/32