ROHM DTC115TE

DTC115TM / DTC115TE / DTC115TUA /
DTC115TKA / DTC115TSA
Transistors
Digital transistors (built in resistor)
DTC115TM / DTC115TE / DTC115TUA /
DTC115TKA / DTC115TSA
!External dimensions (Units : mm)
0.4 0.4
1.2
0.32
0.2
(2)
(3)
0.13
0~0.1
0.5
0.22
(1)
0.3
1.6
0.7
0.55
(1) Emitter
(2) Base
(3) Collector
0~0.1
0.1Min.
2.0
1.3
0.9
(1)
(2)
0.65 0.65
(3)
0.3
0.7
DTC115TUA
C
1.25
R1
2.1
E : Emitter
C : Collector
B : Base
0.1Min.
ROHM : UMT3
EIAJ : SC-70
0~0.1
0.15
0.2
E
Each lead has same dimensions
(2)
(3)
0.4
(1)
DTC115TKA
(1) Emitter
(2) Base
(3) Collector
0.95 0.95
B
1.6
(2)
0.8
1.0
0.2
(1)
0.5 0.5
DTC115TE
(3)
(1) Base
(2) Emitter
(3) Collector
0.15Max.
0.2
ROHM : VMT3
ROHM : EMT3
EIAJ : SC-75A
!Equivalent circuit
1.2
0.8
0.2
0.8
DTC115TM
0.15
!Features
1) Built-in bias resistors enable the configuration of an
inverter circuit without connecting external input
resistors.
2) The bias resistors consist of thin-film resistors with
complete isolation to allow negative biasing of the
input, and parasitic effects are almost completely
eliminated.
3) Only the on / off conditions need to be set for
operation, making device design easy.
4) Higher mounting densities can be achieved.
1.6
0~0.1
0.8
0.15
2.8
0.3Min.
ROHM : SMT3
EIAJ : SC-59
Each lead has same dimensions
DTC115TSA
2
(15Min.)
3Min.
3
4
(1) Emitter
(2) Base
(3) Collector
0.45
2.5
0.5 0.45
5
(1) (2) (3)
ROHM : SPT
EIAJ : SC-72
Taping specifications
(1) Emitter
(2) Collector
(3) Base
DTC115TM / DTC115TE / DTC115TUA /
DTC115TKA / DTC115TSA
Transistors
!Absolute maximum ratings (Ta=25°C)
Parameter
Collector-base voltage
Collector-emitter voltage
Symbol
Limits
Unit
VCBO
VCEO
50
50
V
V
VEBO
IC
5
100
V
mA
Emitter-base voltage
Collector current
DTC115TM / DTC115TE
Collector power
DTC115TUA / DTC115TKA
dissipation
DTC115TSA
Junction temperature
Tj
150
200
300
150
Tstg
−55~+150
Pc
Storage temperature
mW
˚C
˚C
!Packaging, marking, and packaging specifications
Part No.
DTC115TM
DTC115TE
DTC115TUA
DTC115TKA
DTC115TSA
Package
Marking
VMT3
09
EMT3
09
UMT3
09
SMT3
09
SPT
-
T2L
8000
TL
3000
T106
3000
T146
3000
TP
5000
Packaging code
Basic ordering unit (pieces)
!Electrical characteristics (Ta=25°C)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Collector-base breakdown voltage
Collector-emitter breakdown voltage
BVCBO
BVCEO
50
50
-
Emitter-base breakdown voltage
Collector cutoff current
BVEBO
5
-
-
V
V
V
Emitter cutoff current
Collector-emitter saturation voltage
ICBO
0.5
µA
-
0.5
0.3
µA
V
-
-
VCE(sat)
-
DC current transfer ratio
hFE
100
250
600
Input resistance
R1
100
250
kΩ
fT
70
-
130
Transition frequency
-
MHz
∗ Transition frequency of the device.
IEBO
Conditions
IC=50µA
IC=1mA
IE=50µA
VCB=50V
VEB=4V
IC/IB=1mA/0.1mA
IC=1mA, VCE=5V
VCE=10V, IE=−5mA, f=100MHz
∗
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document use silicon as a basic material.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.0
WWW.ALLDATASHEET.COM
Copyright © Each Manufacturing Company.
All Datasheets cannot be modified without permission.
This datasheet has been download from :
www.AllDataSheet.com
100% Free DataSheet Search Site.
Free Download.
No Register.
Fast Search System.
www.AllDataSheet.com