2SA2120 TOSHIBA Transistor Silicon PNP Triple Diffused Type 2SA2120 Power Amplifier Applications Unit: mm • Complementary to 2SC5948 • Recommended for audio frequency amplifier output stage. Absolute Maximum Ratings (Tc = 25°C) Characteristic Symbol Rating Unit Collector-base voltage VCBO −200 V Collector-emitter voltage VCEO −200 V Emitter-base voltage VEBO −5 V Collector current IC −12 A Base current IB −1.2 A Collector power dissipation PC 200 W Junction temperature Tj 150 °C Tstg −55~150 °C Storage temperature range Note: Using continuously under heavy loads (e.g. the application of high JEDEC ― temperature/current/voltage and the significant change in JEITA ― temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. TOSHIBA 2-16C1A operating temperature/current/voltage, etc.) are within the Weight: 4.7 g (typ.) absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 1 2006-11-16 2SA2120 Electrical Characteristics (Tc = 25°C) Characteristic Symbol Test Conditions Min Typ. Max Unit Collector cut-off current ICBO VCB = −200 V, IE = 0 ― ― −5.0 μA Emitter cut-off current IEBO VEB = −5 V, IC = 0 ― ― −5.0 μA V (BR) CEO IC = −50 mA, IB = 0 −200 ― ― V VCE = −5 V, IC = −1 A 55 ― 160 hFE (2) VCE = −5 V, IC = −7 A 35 80 ― VCE (sat) IC = −8 A, IB = −0.8 A ― −1.5 −3.0 V Base-emitter voltage VBE VCE = −5 V, IC = −7 A ― −1.0 −1.5 V Transition frequency fT VCE = −5 V, IC = −1 A ― 25 ― MHz VCB = −10 V, IE = 0, f = 1 MHz ― 470 ― pF Collector-emitter breakdown voltage hFE (1) DC current gain (Note) Collector-emitter saturation voltage Collector output capacitance Cob Note: hFE (1) classification R: 55~110, O: 80~160 Marking TOSHIBA A2120 Characteristics indicator Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2006-11-16 2SA2120 IC – VCE −12 IC – VBE −12 −200 −300 Common emitter Common emitter Tc = 25°C −10 (A) −140 −8 Collector current IC (A) Collector current IC VCE = −5 V −10 −100 −80 −6 −60 −4 −40 −2 IB = −20mA 0 0 −2 −4 −6 −8 −10 Collector-emitter voltage −8 −6 Tc = 100°C −25 −2 −12 0 −14 0 −0.4 −0.8 hFE – IC Common emitter DC current gain hFE Tc = 100°C 25 −25 10 −0.1 −10 −1 Collector current IC −100 Ta = 100°C 1 0.1 0.01 −0.01 −0.1 −1 Collector current Transition frequency fT (MHZ) Base −emitter saturation voltage VBE (sat) (V) IC / IB = 10 Tc = −25°C 25 100 0.1 −1 Collector current −10 IC −10 IC −100 (A) fT – IC 100 Common emitter −0.1 25 −25 VBE (sat) – IC 0.01 −0.01 VBE (V) IC / IB = 10 (A) 10 1 −2.0 Common emitter Collector −emitter saturation voltage VCE (sat) (V) VCE = −5 V −1.6 VCE (sat) – IC 10 1 −0.01 −1.2 Base-emitter voltage VCE (V) 1000 100 25 −4 10 1 0.1 −0.01 −100 (A) Common emitter VCE = −5 V Tc = 25°C −0.1 Collector current 3 −10 −1 IC (A) 2006-11-16 2SA2120 Safe operating area −100 200 (A) IC max (pulsed)* Collector current IC 150 100 50 0 40 80 120 160 Ta 1 ms* IC max (continuous) 10 ms* 100 ms* −10 DC operation Tc = 25°C −1 *: Single non-repetitive 200 pulse Tc = 25°C (°C) VCEO max Ambient temperature Curves must be de-rated linearly with increase in −0.1 −1 temperature. −10 −100 Collector-emitter voltage −1000 VCE (V) rth – tw 100 rth (°C/W) 0 Transient thermal resistance Collector power dissipation PC (W) PC – Ta 250 Curves should be applied in thermal limited area. (single non-repetitive pulse) ① Infinite heat sink ② No heat sink ② 10 1 ① 0.1 0.01 0.001 0.01 0.1 1 Pulse width 4 10 tw 100 1000 (s) 2006-11-16 2SA2120 RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2006-11-16