ALUMINUM ELECTROLYTIC CAPACITORS RS Compact & Low-profile Sized series (Through 100V only) More compact & low profile case sizes than VS series. Adapted to the RoHS directive (2002/95/EC). RZ High Temperature RS Specifications Item Performance Characteristics Category Temperature Range – 40 ~ +85˚C Rated Voltage Range 6.3 ~ 400V Rated Capacitance Range 0.1 ~ 10000µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Rated voltage (V) Leakage Current 6.3 ~ 100 After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. 160 ~ 400 After 1 minute's application of rated voltage. I = 0.04CV+100 (µA) or less After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. tan δ Rated voltage (V) tan δ ( MAX.) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 Measurement frequency : 120Hz, Temperature : 20˚C 50 0.12 63 0.10 100 0.08 160 0.20 200 0.20 250 0.20 400 0.25 Measurement frequency : 120Hz Rated voltage (V) Z– 25˚C / Z+20˚C Impedance ratio ZT / Z20 (MAX.) Z– 40˚C / Z+20˚C Stability at Low Temperature 6.3 5 12 10 4 10 16 3 8 25 2 5 50 2 3 35 2 4 63 2 3 100 2 3 160 3 4 200 3 4 250 3 6 400 6 10 Endurance After 2000 hours' application of rated voltage at 85˚C, capacitors meet the characteristic requirements listed at right. Shelf Life After storing the capacitors under no load at 85˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C,they will meet the specified value for endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Capacitance change tan δ Leakage current Type numbering system (Example : 10V 330µF) Radial Lead Type φd Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 URS 1 A 3 3 1 MPD P ± 0.5 φD+0.5 MAX Size code Configuration Capacitance tolerance (±20%) Rated Capacitance (330µF) Rated voltage (10V) Pressure relief vent (φ8up) Series name L+ 15MIN MAX Type 4MIN Configuration (mm) φD P φd 5 2.0 0.5 6.3 2.5 0.5 8 3.5 0.6 10 5.0 0.6 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 20 10.0 1.0 φD Pb-free leadwire Pb-free PET sleeve 5 · 6.3 DD 8 · 10 12.5 ~ 18 20 PD HD RD (φD 20) 1.5 (φD 20) 2.0 • Please refer to page 21 about the end seal configulation. Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS RS series Dimensions V Cap.(µF) Code 0.1 0R1 0.22 R22 0.33 R33 0.47 R47 1 010 2.2 2R2 3.3 3R3 4.7 4R7 10 100 22 220 33 330 47 470 100 101 220 221 330 331 470 471 1000 102 2200 222 3300 332 4700 472 6800 682 10000 103 6.3 × 9 8× 9 10 × 9 12.5 × 15 × 15 16 × 15 18 × 15 18 × 20 16 R33 0.47 R47 1 010 2.2 2R2 3.3 3R3 4.7 4R7 47 470 68 680 100 101 150 151 220 221 330 331 470 471 35 55 75 125 200 250 330 510 890 1200 1410 1660 2020 5× 9 5× 9 5× 9 5× 9 6.3 × 9 8× 9 8× 9 10 × 12.5 12.5 × 15 16 × 15 18 × 15 18 × 20 18 × 25 5× 9 55 75 90 135 220 300 360 620 960 1300 1550 1850 40 5× 9 70 5× 9 85 5× 9 100 6.3 × 9 160 8× 9 290 10 × 9 10 × 9 360 410 12.5 × 12.5 16 × 15 18 × 15 18 × 20 18 × 25 720 1160 1460 1770 5× 9 5× 9 5× 9 5× 9 6.3 × 9 10 × 9 10 × 9 10 × 12.5 12.5 × 15 18 × 15 18 × 20 18 × 25 30 50 75 95 110 180 310 380 530 830 1360 1720 5× 9 5× 9 13 5× 9 5× 9 5× 9 6.3 × 9 8× 9 10 × 9 10 × 12.5 12.5 × 12.5 16 × 15 18 × 20 20 × 25 5× 9 35 55 95 100 130 220 340 480 590 1010 1560 5× 9 6.3 × 9 10 × 9 10 × 12.5 20 × 25 1750 Case size Rated ripple 2050 2170 φ D × L (mm) 2350 400 2E 2G 8 × 9.51 8 × 9.51 100 140 170 1.9 4.5 5× 9 6.5 5× 9 17 8 26 35 6.3 × 9 45 8× 9 130 10 × 9 10 × 12.5 230 16 × 15 • 18 × 15 12.5 × 15 370 ∆ 18 × 20 12.5 × 12.5 490 16 × 15 620 .20 × 25 710 18 × 15 .16 × 15 180 250 16 × 15.5 16 × 15 70 10 × 9.51 12.5 × 15.5 750 2000 250 6.3 × 9.51 420 1160 2D 6.3 × 9 240 18 × 20 200 60 140 530 16 × 15 2C 5 × 9.51 90 12.5 × 12.5 160 5× 9 40 120 2A 5× 9 35 6.3 × 9 100 5× 9 26 65 5× 9 1J 5× 9 5 5× 9 63 5× 9 2.3 3.5 5× 9 5× 9 1.1 5× 9 5× 9 6.3 × 9 R22 330 1H 5× 9 0.33 33 50 1V 5× 9 0.22 220 35 1E 5× 9 0R1 22 25 1C 5× 9 0.1 100 16 1A 5× 9 Code 10 10 0J 5× 9 V Cap.(µF) 6.3 18 × 25 420 490 590 710 • 18 × 15 ∆ 18 × 20 18 × 25 .18 × 25 .16 × 15 350 420 490 590 • 18 × 15 .∆ 18 × 20 .18 × 20 .18 × 25 280 350 420 490 • 18 × 15 18 × 20 18 × 25 20 × 25 140 280 350 420 490 590 710 770 760 Case size φ D × L (mm) 900 Rated ripple Rated Ripple (mArms) at 85˚C 120Hz Size φ 16 × 20 is available for capacitors marked " " Size φ 20 × 15 is available for capacitors marked " ∆ " Size φ 20 × 20 is available for capacitors marked " " • Frequency coefficient of rated ripple current V 6.3 ~ 100 160 ~ 400 Cap.(µF) Frequency 00 ~ 47 100 ~ 470 1000 ~ 00000 10 ~ 220 50Hz 0.75 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1 kHz 1.57 1.34 1.13 1.40 10 kHz ~ 2.00 1.50 1.15 1.60 In this case, 6 will be put at 12th digit of type numbering system. CAT.8100V