ALUMINUM ELECTROLYTIC CAPACITORS RZ Compact & Low-Profile Sized, Wide Temperature Range series Very small case sizes same as RS series, but operating over wide temperature range of – 55 (– 40) ~ +105˚C. Adapted to the RoHS directive (2002/95/EC). (Through 100V only) RZ High Temperature RS Specifications Item Performance Characteristics Category Temperature Range – 55 ~ +105˚C (6.3 ~ 100V) , – 40 ~ +105˚C (160 ~ 400V) Rated Voltage Range 6.3 ~ 400V Rated Capacitance Range 0.1 ~ 10000µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Rated voltage (V) Leakage Current 6.3 ~ 100 After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. 160 ~ 400 After 1 minute's application of rated voltage, I = 0.04CV+100 (µA) or less After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency : 120Hz, Temperature : 20˚C Rated voltage (V) tan δ ( MAX.) tan δ 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 50 0.12 63 0.10 100 0.08 160 0.20 200 0.20 250 0.20 400 0.25 Measurement frequency : 120Hz Rated voltage (V) Z– 25˚C / Z+20˚C Impedance ratio ZT / Z20 (MAX.) Z– 40˚C / Z+20˚C Stability at Low Temperature 6.3 5 10 10 4 8 16 3 6 25 2 4 35 2 3 50 2 3 63 2 3 100 2 3 160 3 4 200 3 4 250 3 6 400 6 10 Endurance After 1000 hours' application of rated voltage at 105˚C, capacitors meet the characteristic requirements listed at right. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Capacitance change tan δ Leakage current Type numbering system (Example : 10V 330µF) Radial Lead Type 1 φd Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 UR Z 1 A 3 3 1 MPD Size code P ± 0.5 φD+0.5 MAX Configuration Capacitance tolerance (±20%) Rated Capacitance (330µF) Rated voltage (10V) Pressure relief vent (φ8up) Series name L+ 15MIN MAX Type 4MIN Configuration (mm) (φD < 20) 1.5 (φD 20) 2.0 φD 5 6.3 8 10 12.5 16 18 20 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 φD 5 · 6.3 8 · 10 12.5 ~ 18 20 Pb-free leadwire Pb-free PET sleeve DD PD HD RD • Please refer to page 21 about the end seal configulation. Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS RZ series Dimensions V 6.3 10 16 25 35 50 0J 1A 1C 1E 1V 1H 0.1 Code 0R1 0.22 R22 0.33 R33 0.47 R47 1 010 2.2 2R2 3.3 3R3 4.7 4R7 Cap.(µF) 10 100 22 220 33 330 47 470 100 101 220 221 330 331 470 471 1000 102 2200 222 3300 332 4700 472 6800 682 10000 103 Cap.(µF) Code 5× 9 5× 9 5× 9 5× 9 0R1 0.22 R22 0.33 R33 0.47 R47 1 010 2.2 2R2 3.3 3R3 4.7 4R7 10 100 22 220 33 330 47 470 68 680 100 101 150 151 220 221 330 331 470 471 25 40 5× 9 55 6.3 × 9 145 5× 9 6.3 × 9 8× 9 10 × 9 90 180 235 370 12.5 × 15 635 16 × 15 1010 16 × 15 18 × 15 18 × 20 V 0.1 3.5 5× 9 12 5× 9 860 1200 1450 5× 9 5× 9 5× 9 40 55 5× 9 65 6.3 × 9 155 5× 9 8× 9 8× 9 10 × 12.5 95 210 275 450 12.5 × 15 690 18 × 15 1120 16 × 15 18 × 20 18 × 25 940 1330 30 5× 9 50 5× 9 60 5× 9 70 6.3 × 9... 115 8 × 9.. 205 10 × 9.. 10 × 9.. 240 290 .12.5 × 12.5. 16 × 15 18 × 15 18 × 20 18 × 25 520 830 1050 1260 5× 9 5× 9 5× 9 5× 9 6.3 × 9... 10 × 9.. 10 × 9.. ...10 × 12.5 12.5 × 15... 18 × 15 18 × 20 18 × 25 20 35 55 70 80 130 220 270 370 590 970 1220 5× 9 5× 9 25 5× 9 40 5× 9 60 5× 9 75 6.3 × 9 95 8× 9 155 10 × 9 235 10 × 12.5 12.5 × 12.5 16 × 15 18 × 20 20 × 25 340 420 720 1110 5× 9 5× 9 10 × 9 10 × 12.5 12.5 × 12.5 Case size φ D × L (mm) Rated ripple 1560 400 2E 2G 5 × 9.51 6.3 × 9.51 8 × 9.51 8 × 9.51 42 71 100 120 6.3 × 9 8× 9 10 × 9 10 × 12.5 3 6.5 12 17 25 32 165 16 × 15 • 18 × 15 265 ∆ 18 × 20 12.5 × 12.5 335 16 × 15 440 .20 × 25 18 × 15 .16 × 15 130 12.5 × 15 510 .16 × 15 93 215 16 × 15.5 16 × 15 50 10 × 9.51 12.5 × 15.5 830 1430 250 6.3 × 9 370 1250 2D 5× 9 290 20 × 25 200 5× 9 170 540 18 × 20 2C 5× 9 85 16 × 15 160 5× 9 46 100 2A 4.5 30 6.3 × 9 100 5× 9 25 65 6.3 × 9 1J 5× 9 18 5× 9 63 1.2 5 1470 1700 5× 9 2.3 5× 9 5× 9 5× 9 1.1 18 × 25 300 350 420 510 • 18 × 15 ∆ 18 × 20 18 × 25 .18 × 25 250 300 350 420 • 18 × 15 .∆ 18 × 20 .18 × 20 .18 × 25 200 250 300 350 • 18 × 15 18 × 20 18 × 25 20 × 25 100 200 250 300 350 420 510 550 540 Case size φ D × L (mm) 640 Rated ripple Rated Ripple (mArms) at 105˚C 120Hz Size φ 16 × 20 is available for capacitors marked " " Size φ 20 × 15 is available for capacitors marked " ∆ " Size φ 20 × 20 is available for capacitors marked " " • Frequency coefficient of rated ripple current V 6.3 ~ 100 160 ~ 400 Cap.(µF) Frequency 100 ~ 470 100 ~ 470 1000 ~00000 010 ~ 220 50Hz 0.75 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1 kHz 1.57 1.34 1.13 1.40 10kHz ~ 2.00 1.50 1.15 1.60 In this case, 6 will be put at 12th digit of type numbering system. Wider range of rating. CAT.8100V