ALUMINUM ELECTROLYTIC CAPACITORS PR Standard, For Switching Power Supplies series (Throygh 100V only) Same case sizes as VX series, but operating at higher temperature range up to + 105˚C. Designed specifically for use in switching power supplies. This series will be discontinued in 2002, and combine with PS series. PR High Rippie Current High Reliablity PF,PJ,PS Specifications Performance Characteristics Item Category Temperature Range — 55 ~ + 105˚C(6.3 ~ 100V), — 40 ~ + 105˚C(160 ~ 400V),— 25 ~ + 105˚C(450V) Rated Voltage Range 6.3 ~ 450V Rated Capacitance Range 0.47 ~ 22000µF ±20% at 120Hz,20˚C Capacitance Tolerance Leakage Current Rated voltage(V) 6.3 ~ 100 Leakage current After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4(µA), whichever is greater. After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3(µA), whichever is greater. 160 ~ 450 1000:I=0.1CV + 40(µA)max. (1 minute's) CV>1000:I=0.04CV + 100(µA)max. (1 minute's) Measurement frequency : 120Hz, Temperature : 20˚C For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. tan δ Rated voltage(V) tan δ (MAX.) 6.3 0.26 10 0.22 16 0.18 25 0.16 35 0.13 50 0.10 63 0.09 CV 100 0.08 160 ~ 250 315 • 350 400 • 450 0.15 0.20 0.25 Measurement frequency : 120Hz Rated voltage(V) Impedance ratio Z— 25˚C/ Z + 20˚C ZT/Z20(MAX.) Z— 40˚C/ Z + 20˚C Stability at Low Temperature 6.3 4 8 10 3 6 16 2 4 25 ~ 100 2 250 3 6 160 • 200 3 4 315 • 350 4 8 400 6 10 450 15 — After an application of D.C. bias voltage plus the rated ripple Capacitance change Within ±20% of initial value current for 2000 hours(1000 hours for D=8 or less)at tan δ 105˚C the peak voltage shall not exceed the rated D.C. 200% or less of initial specified value voltage, capacitors meet the characteristics Leakage current Initial specified value or less requirements listed at right. After leaving capacitors under no load at 105˚C for 1000 hours, they meet the specified value for endurance characteristics listed above. Endurance Shelf Life Marking Printed with white color letter on dark brown sleeve. Type numbering system (Example : 10V 330µF) Radial Lead Type 1 φd tinned CP wire Sleeve(P.V.C.) 2 3 4 5 6 7 8 9 10 11 12 UPR 1 A 3 3 1 MPH Case size Code Configuration P±0.5 φD+0.5 MAX Capacitance tolerance(±20%) Rated Capacitance(330µF) Rated voltage(10V) Series name Type φD Code 5 DH 6.3 EH 8 •10 PH 12.5 ~ 18 HH 20 RH Pressure relief vent L+ (φ6.3up) φD P φd MAX 15MIN 4MIN 5 2.0 6.3 2.5 8 3.5 10 5.0 12.5 16 18 5.0 7.5 7.5 20 10.0 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 (L<20) 1.5 (L 20) 2.0 Please refer to page 18, 19, 20 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100P ALUMINUM ELECTROLYTIC CAPACITORS PR series Standard ratings V(Code) Item Case size Code Cap.(µF) 0000.4.7 0010 0022 0033 0047 0100 0220 0330 0470 1000 2200 3300 4700 6800 100000 150000 220000 4R7 100 220 330 470 101 221 331 471 102 222 332 472 682 103 153 223 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11. 6.3 × 11. 8 × 11.5 10 × 12.5 12.5 × 20 12.5 × 20 16 × 25 16 × 25 16 × 31.5 18 × 35.5 20 × 40 V(Code) Item Case size Cap.(µF) Code 000.47 1 002.2 003.3 004.7 0100 0220 0330 0470 1000 2200 3300 4700 10000 22000 33000 47000 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 222 332 472 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25 16 × 31.5 18 × 35.5 18 × 40 6.3(0J) Impedance 2.400 2.300 2.100 1.900 0.670 0.480 0.310 0.220 0.096 0.090 0.061 0.056 0.051 0.039 0.030 10(1A) Rated ripple Case size 5.000 2.800 2.300 1.900 1.000 0.500 0.246 0.200 0.121 0.067 0.044 0.038 0.033 Rated ripple 0034 0050 0065 0100 0165 0200 0280 0470 0930 1100 1320 1490 1830 2280 2860 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 16 12.5 × 20 12.5 × 25 16 × 25 16 × 31.5 18 × 35.5 18 × 40 2.400 2.300 2.100 1.800 0.580 0.360 0.260 0.140 0.090 0.074 0.054 0.046 0.038 0.033 Rated ripple Case size Impedance Rated ripple 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 16 10 × 20 12.5 × 20 16 × 25 18 × 35.5 20 × 40 47.00 22.00 10.00 06.70 04.70 02.20 01.90 00.84 00.80 00.45 00.21 00.19 00.10 000.053 000.037 000.028 0007 0012 0018 0025 0030 0050 0175 0105 0125 0210 0400 1535 1730 1110 1530 1950 35(1V) Impedance 16(1C) Impedance 0045 0060 0075 0110 0180 0255 0305 0570 1010 1220 1410 1610 1980 2470 Case size 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 12.5 10 × 20 12.5 × 25 16 × 25 16 × 31.5 18 × 35.5 18 × 40 2.800 2.400 2.300 1.800 0.800 0.360 0.320 0.200 0.120 0.067 0.052 0.045 0.040 0.035 Case size Impedance 50(1H) 0027 0144 0165 0285 0115 0190 0325 1440 1580 1995 1450 1660 2030 Impedance 25(1E) Rated ripple 0035 0055 0070 0085 0135 0235 0285 0395 0700 1150 1350 1560 1750 2170 Case size Impedance Rated ripple 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 12.5 × 20 16 × 25 16 × 31.5 18 × 35.5 20 × 40 5.000 2.800 2.400 2.200 1.600 0.620 0.350 0.220 0.160 0.100 0.053 0.045 0.040 0.030 0024 0039 0060 0075 0090 0145 0250 0355 0470 0855 1230 1450 1660 2070 Case size Impedance Rated ripple 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11. 8 × 11.5 10 × 12.5 10 × 16 12.5 × 20 16 × 25 16 × 25 16 × 31.5 18 × 40 43.0000 20.0000 09.8000 06.6000 04.6000 01.8000 00.6800 00.4600 00.3700 00.1800 00.1000 00.0900 0.076 0.047 0010 0015 0022 0029 0037 0065 0115 0160 0210 0385 0590 0720 0875 1320 63(1J) 5 × 11 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 20 12.5 × 20 12.5 × 25 16 × 31.5 18 × 40 4.700 2.100 0.980 0.710 0.650 0.310 0.200 0.120 0.081 0.049 0.032 100(2A) Rated ripple 0034 0055 0190 0110 0155 0260 0465 0650 0800 1200 1840 Case size : D × L(mm) MAX. Impedance : (Ω) at 20˚C 100kHz Rated ripple : (mA)at 105˚C 120Hz V Code Cap.(µF) 000.47 1 002.2 003.3 004.7 0100 0220 0330 0470 1000 2200 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 160 2C 6.3 × 11 6.3 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 12.5 10 × 20 12.5 × 20 12.5 × 25 16 × 25 18 × 35.5 12 17 25 36 43 70 130 180 220 330 500 200 2D 6.3 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25 12.5 × 25 16 × 31.5 18 × 40 12 17 25 36 50 80 140 190 220 335 515 250 2E 6.3 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 12.5 10 × 20 12.5 × 25 12.5 × 25 16 × 25 18 × 35.5 20 × 40 12 17 29 42 50 88 155 190 230 340 525 315 2F 8 × 11.5 8 × 11.5 10 × 12.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25 16 × 25 16 × 35.5 18 × 40 11 16 28 34 45 72 120 155 190 285 350 2V 8 × 11.5 10 × 12.5 10 × 16 10 × 16 10 × 20 12.5 × 20 16 × 25 16 × 31.5 18 × 35.5 20 × 40 400 2G 450 2W 11 10 × 12.5 16 10 × 12.5 18 17 10 × 16 10 × 20 31 27 29 10 × 20 38 36 12.5 × 20 41 10 × 20 49 43 12.5 × 20 49 16 × 25 82 12.5 × 25 72 75 16 × 25 110 16 × 31.5 115 130 16 × 31.5 140 18 × 35.5 145 160 18 × 35.5 170 20 × 40 175 200 290 Rated Case size ripple Rated Ripple(mA rms)at 105˚C 120Hz Size 20 × 31 is available for capacitors marked. " " Size 20 × 35 is available for capacitors marked. " " In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current V 6.3 ~ 100 160 ~ 450 Cap.(µF) Frequency 0 ~ 47 100 ~ 4700 1000 ~ 22000 0.47 ~ 22000 50Hz 0.75 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1kHz 1.57 1.34 1.13 1.40 10kHz ~ 2.00 1.50 1.15 1.60 CAT.8100P