ALUMINUM ELECTROLYTIC CAPACITORS UA 6mmL Chip Type, Long Life Assurance series Chip type with load life of 3000~5000 hours at +105°C. Designed for surface mounting on high density PC board. Adapted to the RoHS directive (2002/95/EC). UA UL Long Life UT Long Life Specifications Item Performance Characteristics Category Temperature Range – 55 ~ +105°C Rated Voltage Range 6.3 ~ 50V Rated Capacitance Range 0.1 ~ 1000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (µA) , whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C tan δ Rated voltage (V) tan δ (MAX.) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.13 50 0.12 Measurement frequency : 120Hz Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 55°C / Z+20°C Stability at Low Temperature 6.3 4 10 After 3000 hours' (5000 hours for φ8, φ10) application of rated voltage at 105°C , capacitors meet the characteristic requirements listed at right. Endurance 10 3 7 16 2 5 25 2 3 Capacitance change tan δ Leakage current 35 2 3 50 2 3 Within ±30% of initial value 300% or less of initial specified value Initial specified value or less After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. The capacitors shall be kept on the hot plate maintained at 250°C Capacitance change Within ±10% of initial value for 30 seconds. After removing from the hot plate and restored tan δ Initial specified value or less at room temperature, they meet the characteristic requirements Leakage current Initial specified value or less listed at right. Shelf Life Resistance to soldering heat Black print on the case top. Marking Type numbering system (Example : 16V 10µF) Chip Type (φ4 ~ 6.3) Positive L±0.3 Capacitance Lot No. 3 4 5 6 7 8 9 10 11 12 13 14 Taping code E B±0.2 φD±0.5 X2 33 j UA C±0.2 2 Configuration A±0.2 A±0.2 0.3MAX. Series 0.5MAX. Plastic platform Voltage ( j : 6.3V) 1 UUA 1 C 1 0 0 MC L 1 GS Capacitance tolerance (–20%) Rated Capacitance (10 F) Rated voltage (16V) φD 4 ~ 6.3 8 ¥ 10 Code CL NL Negative H Series name Type (φ8 × 10, φ10 × 10 ) Positive E B±0.2 φD±0.5 C±0.2 L±0.5 Lot No. Voltage V 6.3 Code j Capacitance 10 A 16 C H A±0.2 A±0.2 0.3MAX. Series (mm) φD 0.5MAX. Plastic platform X2 100V UA Voltage ( V : 35V) Trade mark Negative ×L 10 × 10 4 × 5.8 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 10 A 1.8 2.1 2.4 2.4 2.9 3.2 B 4.3 5.3 6.6 6.6 8.3 10.3 C 4.3 5.3 6.6 6.6 8.3 10.3 E 1.0 1.3 2.2 2.2 3.1 4.5 L 5.8 5.8 5.8 7.7 10 10 H 0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 0.8 ~ 1.1 0.8 ~ 1.1 Pressure relief vent 25 E 35 V 50 H Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS UA series Dimensions Cap.(µF) V 6.3 10 16 25 35 50 Code 0J 1A 1C 1E 1V 1H 0.1 0R1 4 × 5.8 1 0.22 R22 4 × 5.8 2.6 0.33 R33 4 × 5.8 3.2 0.47 R47 4 × 5.8 5 1 010 4 × 5.8 8 2.2 2R2 4 × 5.8 12 3.3 3R3 4.7 4R7 4 × 5.8 17 4 × 5.8 16 5 × 5.8 22 32 4 × 5.8 18 5 × 5.8 27 5 × 5.8 27 6.3 × 5.8 30 5 × 5.8 30 6.3 × 5.8 44 6.3 × 5.8 44 6.3 × 7.7 58 5 × 5.8 35 6.3 × 5.8 48 6.3 × 5.8 50 6.3 × 7.7 57 8 × 10 140 10 100 22 220 4 × 5.8 22 5 × 5.8 33 330 5 × 5.8 35 47 470 5 × 5.8 38 6.3 × 5.8 50 6.3 × 5.8 50 6.3 × 7.7 63 8 × 10 92 8 × 10 170 100 101 6.3 × 5.8 69 6.3 × 7.7 81 6.3 × 7.7 81 8 × 10 116 10 × 10 151 10 × 10 310 220 221 6.3 × 7.7 120 8 × 10 141 10 × 10 216 10 × 10 320 10 × 10 375 330 331 8 × 10 290 10 × 10 290 10 × 10 290 10 × 10 450 470 471 10 × 10 320 10 × 10 320 10 × 10 320 1000 102 10 × 10 410 Case size φ D × L (mm) Rated ripple Rated Ripple (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz~ 1.50 Taping specifications are given in page 24. Recommended land size, soldering by reflow are given in page 25, 26. Please refer to page 3 for the minimum order quantity. CAT.8100V