VISHAY XTM

XTH, XTK, XTL, XTM, XTV
www.vishay.com
Vishay
Wet Tantalum Capacitors
Cylindrical Body, Hermetically Sealed
FEATURES
• High temperature
• High voltage
• High capacitance
• Withstands high frequency vibration to 2000 Hz
• Hermetically sealed
• Long shelf life
• DSCC drawings 04032 and 04033
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 175 °C with proper
derating
Capacitance Range: 2 μF to 2200 μF
Tolerance Range:
- 15 % to + 50 % (standard for XTK, XTM, XTV)
- 15 % to + 75 % (standard for XTH, XTL)
± 20 % (special order)
Voltage Range: 8 VDC to 630 VDC at 85 °C
Reverse Voltage: None
ORDERING INFORMATION
XTV
126
T
630
P
0
A
MODEL
CAPACITANCE
CODE
CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING
CASE CODE
INSULATION
TERMINAL
CONFIGURATION
XTH
XTK
XTL
XTM
XTV
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third
is the number of
zeros to follow.
T = - 15 % to + 50 %
(XTK, XTM, XTV standard)
U = - 15 % to + 75 %
(XTH, XTL standard)
M = ± 20 %
(special order)
This is expressed
in volts. To
complete the
three-digit block,
zeros precede the
voltage rating.
P = Polar
(case negative)
R = Reverse
polarity
(case positive)
0 = Uninsulated
(standard)
4 = Teflon
(+ 175 °C limit)
See Styles
Note
• For styles, terminal configurations, mounting methods and hardware, please see pages following standard ratings table
DIMENSIONS in inches [millimeters]
XTH-XTL-XTV
XTK-XTM
2.250
± 0.250
D
H
(+)
0.281
± 0.062
0.281
± 0.062
5/16 ± 1/16
TYPE
D
H
XTK - XTM
0.656
0.438 to 1.781
XTL - XTH
0.875
0.540 to 4.062
XTV
1.125
0.600 to 2.810
Revision: 25-Jul-11
1
2.250
± 0.250
(-)
(+)
Case
negative
D
H
Document Number: 42077
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
XTH, XTK, XTL, XTM, XTV
www.vishay.com
Vishay
STANDARD RATINGS AND DIMENSIONS
CAPACITANCE
(μF)
MAX.
WORKING
VOLTAGE
MAX. DCL AT
MAX. VDC
(μA)
TYP.
ESR
MAX.
Z
- 55 °C
MAX. % CAP.
CHANGE FROM
ROOM TEMP.
SIZE
MAX.
RIPPLE
120 Hz
APPROX.
RMS
D
H
WEIGHT
- 55 °C + 0.031 + 0.062
TO
- 0.015 - 0.062
+ 175 °C
+ 125 °C + 175 °C () + 85 °C + 125 °C + 175 °C () - 55 °C + 85 °C + 175 °C
(g)
PART
NUMBER
(mA)
8 VDC AT + 85 °C
70
7
5
10.0
30
45
60
60
- 60
+ 30
+ 30
14
137
0.656 0.438 XTK706(1)008P0A
140
7
5
5.0
50
75
100
30
- 60
+ 30
+ 30
15
213
0.656 0.562 XTM147(1)008P0A
50
8.5
7
10.0
25
37
50
75
- 60
+ 30
+ 30
14
137
0.656 0.438 XTK506(1)010P0A
100
8.5
7
5.0
45
67
90
40
- 60
+ 30
+ 30
15
213
0.656 0.562 XTM107(1)010P0A
580
10
8
1.5
135
197
270
+ 35
48
550
1.125 0.600 XTV587(1)012P0A
10 VDC AT + 85 °C
12 VDC AT + 85 °C
20
- 90
+ 20
850
10
8
1.5
135
197
270
20
- 90
+ 20
+ 35
50
550
1.125 0.600 XTV857(1)012P0A
1100
10
8
1.5
135
197
270
20
- 90
+ 20
+ 35
60
694
1.125 1.100 XTV118(1)012P0A
2200
10
8
1.5
135
197
270
20
- 90
+ 20
+ 35
82
694
1.125 1.100 XTV228(1)012P0A
18 VDC AT + 85 °C
35
15
12
10.0
30
45
60
85
- 60
+ 30
+ 30
14
137
0.656 0.438 XTK356(1)018P0A
70
15
12
5.0
50
75
100
45
- 60
+ 30
+ 30
15
213
0.656 0.562 XTM706(1)018P0A
120
15
12
2.8
50
75
100
30
- 60
+ 15
+ 40
26
328
0.875 0.540 XTL127(1)018P0A
240
15
12
2.5
80
120
160
20
- 60
+ 15
+ 40
32
390
0.875 0.732 XTH247(1)018P0A
390
15
12
1.5
165
227
330
20
- 85
+ 20
+ 35
48
550
1.125 0.600 XTV397(1)018P0A
560
15
12
1.5
165
227
330
20
- 85
+ 20
+ 35
50
550
1.125 0.600 XTV567(1)018P0A
900
15
12
1.5
165
227
330
20
- 85
+ 20
+ 35
68
694
1.125 1.100 XTV907(1)018P0A
1800
15
12
1.5
165
227
330
20
- 85
+ 20
+ 35
82
694
1.125 1.100 XTV188(1)018P0A
28
17.5
13
10.0
30
45
60
85
- 60
+ 30
+ 30
14
137
0.656 0.438 XTK286(1)020P0A
56
17.5
13
5.0
50
75
100
45
- 60
+ 30
+ 30
15
213
0.656 0.562 XTM566(1)020P0A
20 VDC AT + 85 °C
100
17.5
13
2.8
50
75
100
30
- 60
+ 15
+ 40
26
328
0.875 0.540 XTL107(1)020P0A
200
17.5
13
2.5
80
120
160
20
- 60
+ 15
+ 40
32
390
0.875 0.732 XTH207(1)020P0A
20
25
20
10.0
35
52
70
125
- 40
+ 20
+ 20
14
137
0.656 0.438 XTK206(1)030P0A
40
25
20
5.0
60
90
120
75
- 40
+ 20
+ 20
15
213
0.656 0.562 XTM406(1)030P0A
75
25
20
2.7
55
82
110
45
- 45
+ 15
+ 30
26
333
0.875 0.540 XTL756(1)030P0A
30 VDC AT + 85 °C
150
25
20
2.7
90
135
180
30
- 45
+ 15
+ 30
32
375
0.875 0.732 XTH157(1)030P0A
250
25
20
2.5
195
287
390
20
- 65
+ 20
+ 35
48
427
1.125 0.600 XTV257(1)030P0A
370
25
20
1.5
125
170
215
15
- 65
+ 20
+ 35
50
550
1.125 0.600 XTV377(1)030P0A
650
25
20
1.5
145
202
250
15
- 85
+ 20
+ 35
68
694
1.125 1.100 XTV657(1)030P0A
1300
25
20
1.5
190
282
375
10
- 85
+ 20
+ 35
82
694
1.125 1.100 XTV138(1)030P0A
35 VDC AT + 85 °C
20
30
23
10.0
35
52
72
125
- 40
+ 20
+ 20
14
137
0.656 0.438 XTK206(1)035P0A
40
30
23
5.0
60
90
120
75
- 40
+ 20
+ 20
15
213
0.656 0.562 XTM406(1)035P0A
60
30
23
2.7
55
82
110
45
- 45
+ 10
+ 30
26
333
0.875 0.540 XTL606(1)035P0A
Note
• Part number definitions:
(1) Tolerance code:
T = - 15 % to + 50 % (standard for XTK, XTM, XTV)
U = -15 % to + 75 % (standard for XTH, XTL)
M = ± 20 % (available by special order)
Revision: 25-Jul-11
2
Document Number: 42077
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
XTH, XTK, XTL, XTM, XTV
www.vishay.com
Vishay
STANDARD RATINGS AND DIMENSIONS
CAPACITANCE
(μF)
MAX.
WORKING
VOLTAGE
MAX. DCL AT
MAX. VDC
(μA)
TYP.
ESR
MAX.
Z
- 55 °C
MAX. % CAP.
CHANGE FROM
ROOM TEMP.
SIZE
MAX.
RIPPLE
120 Hz
APPROX.
RMS
D
H
WEIGHT
- 55 °C + 0.031 + 0.062
TO
- 0.015 - 0.062
+ 175 °C
+ 125 °C + 175 °C () + 85 °C + 125 °C + 175 °C () - 55 °C + 85 °C + 175 °C
(g)
(mA)
PART
NUMBER
40 VDC AT + 85 °C
190
34
27
2.5
195
297
400
20
- 55
+ 20
+ 35
48
427
1.125 0.600 XTV197(1)040P0A
290
34
27
2.5
200
300
400
20
- 55
+ 20
+ 35
50
427
1.125 0.600 XTV297(1)040P0A
500
34
27
1.5
200
300
400
20
- 75
+ 20
+ 35
68
694
1.125 1.100 XTV507(1)040P0A
1000
34
27
1.5
195
297
400
20
- 75
+ 20
+ 35
82
694
1.125 1.100 XTV108(1)040P0A
+ 35
82
694
1.125 1.100 XTV907(1)050P0A
50 VDC AT + 85 °C
900
44
32
1.5
195
297
400
25
- 85
+ 20
60 VDC AT + 85 °C
12
50
40
10.0
35
52
70
180
- 30
+ 20
+ 20
14
137
0.656 0.438 XTK126(1)060P0A
25
50
40
5.0
60
90
120
90
- 30
+ 20
+ 20
15
213
0.656 0.562 XTM256(1)060P0A
40
50
40
2.7
60
90
120
65
- 35
+ 10
+ 20
26
333
0.875 0.540 XTL406(1)060P0A
70
50
40
2.7
90
135
180
40
- 35
+ 10
+ 20
32
375
0.875 0.732 XTH706(1)060P0A
80
50
40
2.7
95
142
190
35
- 35
+ 10
+ 20
32
375
0.875 0.732 XTH806(1)060P0A
130
50
40
2.5
210
315
420
30
- 50
+ 20
+ 35
48
427
1.125 0.600 XTV137(1)060P0A
200
50
40
1.5
135
182
230
30
- 50
+ 20
+ 35
50
550
1.125 0.600 XTV207(1)060P0A
350
50
40
1.5
155
210
265
25
- 70
+ 20
+ 35
68
694
1.125 1.100 XTV357(1)060P0A
700
50
40
1.5
200
275
350
15
- 70
+ 20
+ 35
82
694
1.125 1.100 XTV707(1)060P0A
750
50
40
1.5
200
275
350
29
- 70
+ 20
+ 35
82
694
1.125 1.100 XTV757(1)060P0A
8.0
80
60
10.0
35
52
70
250
- 30
+ 20
+ 20
14
137
0.656 0.438 XTK805(1)090P0A
16
80
60
5.0
60
90
120
125
- 30
+ 20
+ 20
15
213
0.656 0.562 XTM166(1)090P0A
25
80
60
2.7
55
82
110
90
- 35
+ 10
+ 20
26
333
0.875 0.540 XTL256(1)090P0A
90 VDC AT + 85 °C
50
80
60
2.7
90
135
180
45
- 35
+ 10
+ 20
32
375
0.875 0.732 XTH506(1)090P0A
84
80
60
2.5
195
287
390
40
- 40
+ 20
+ 35
48
427
1.125 0.600 XTV846(1)090P0A
120
80
60
1.5
135
182
230
40
- 40
+ 20
+ 35
50
550
1.125 0.600 XTV127(1)090P0A
220
80
60
1.5
145
202
250
30
- 60
+ 20
+ 35
68
694
1.125 1.100 XTV227(1)090P0A
450
80
60
1.5
195
215
235
25
- 60
+ 20
+ 35
82
694
1.125 1.100 XTV457(1)090P0A
180 VDC AT + 85 °C
2.0
160
120
20.0
75
112
150
850
- 30
+ 20
+ 20
21
108
0.656 0.719 XTK205(1)180P0A
4.0
160
120
20.0
35
52
70
500
- 30
+ 20
+ 20
21
117
0.656 0.719 XTK405(1)180P0A
8.0
160
120
10.0
60
90
120
250
- 30
+ 20
+ 20
23
186
0.656 0.938 XTM805(1)180P0A
12
160
120
5.6
55
82
110
180
- 35
+ 10
+ 20
44
282
0.875 0.920 XTL126(1)180P0A
25
160
120
5.3
90
135
180
90
- 35
+ 10
+ 20
56
341
0.875 1.300 XTH256(1)180P0A
42
160
120
5.0
120
162
205
75
- 40
+ 20
+ 35
74
363
1.125 0.976 XTV426(1)180P0A
60
160
120
3.0
135
182
230
60
- 40
+ 20
+ 35
78
363
1.125 0.976 XTV606(1)180P0A
110
160
120
3.0
145
202
250
60
- 60
+ 20
+ 35
114
631
1.125 1.938 XTV117(1)180P0A
230
160
120
3.0
200
275
350
50
- 60
+ 20
+ 35
142
631
1.125 1.938 XTV237(1)180P0A
Note
• Part number definitions:
(1) Tolerance code:
T = - 15 % to + 50 % (standard for XTK, XTM, XTV)
U = -15 % to + 75 % (standard for XTH, XTL)
M = ± 20 % (available by special order)
Revision: 25-Jul-11
3
Document Number: 42077
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
XTH, XTK, XTL, XTM, XTV
www.vishay.com
Vishay
STANDARD RATINGS AND DIMENSIONS
CAPACITANCE
(μF)
MAX.
WORKING
VOLTAGE
MAX. DCL AT
MAX. VDC
(μA)
TYP.
ESR
MAX.
Z
- 55 °C
MAX. % CAP.
CHANGE FROM
ROOM TEMP.
SIZE
MAX.
RIPPLE
120 Hz
APPROX.
RMS
D
H
WEIGHT
- 55 °C + 0.031 + 0.062
TO
- 0.015 - 0.062
+ 175 °C
+ 125 °C + 175 °C () + 85 °C + 125 °C + 175 °C () - 55 °C + 85 °C + 175 °C
(g)
PART
NUMBER
(mA)
270 VDC AT + 85 °C
2.5
240
180
30.0
35
52
70
750
- 30
+ 20
+ 20
28
112
0.656 1.031 XTK255(1)270P0A
5.0
240
180
15.0
55
82
110
375
- 30
+ 20
+ 20
31
179
0.656 1.375 XTM505(1)270P0A
8.0
240
180
8.3
55
82
110
270
- 35
+ 10
+ 20
62
266
0.875 1.270 XTL805(1)270P0A
16
240
180
8.3
90
135
180
135
- 35
+ 10
+ 20
81
320
0.875 1.865 XTH166(1)270P0A
28
240
180
7.5
120
162
205
80
- 40
+ 20
+ 35
100
339
1.125 1.350 XTV286(1)270P0A
40
240
180
7.5
135
182
230
100
- 40
+ 20
+ 35
104
339
1.125 1.350 XTV406(1)270P0A
75
240
180
4.5
145
202
250
90
- 60
+ 20
+ 35
160
608
1.125 2.812 XTV756(1)270P0A
150
240
180
4.5
195
215
235
75
- 60
+ 20
+ 35
202
608
1.125 2.812 XTV157(1)270P0A
2.0
320
240
40.0
35
52
70
1000
- 30
+ 20
+ 20
37
108
0.656 1.312 XTK205(1)360P0A
4.0
320
240
20.0
60
90
120
500
- 30
+ 20
+ 20
41
175
0.656 1.781 XTM405(1)360P0A
6.0
320
240
11.0
55
82
110
360
- 35
+ 10
+ 20
80
258
0.875 1.635 XTL605(1)360P0A
12
320
240
11.0
90
135
180
180
- 35
+ 10
+ 20
105
314
0.875 2.420 XTH126(1)360P0A
22
320
240
10.0
125
170
215
100
- 40
+ 20
+ 35
126
323
1.125 1.705 XTV226(1)360P0A
30
320
240
10.0
135
182
230
120
- 40
+ 20
+ 35
133
323
1.125 1.705 XTV306(1)360P0A
360 VDC AT + 85 °C
450 VDC AT + 85 °C
5.0
400
300
13.0
55
82
110
450
- 35
+ 10
+ 20
98
262
0.875 2.000 XTL505(1)450P0A
10
400
300
17
400
300
13.0
90
135
180
225
- 35
+ 10
+ 20
130
318
0.875 2.980 XTH106(1)450P0A
12.5
125
170
215
130
- 40
+ 20
+ 35
152
315
25
400
300
1.125 2.080 XTV176(1)450P0A
12.5
135
182
230
150
- 40
+ 20
+ 35
164
315
1.125 2.080 XTV256(1)450P0A
540 VDC AT + 85 °C
4.0
480
360
16.6
55
82
110
540
- 35
+ 10
+ 20
114
250
0.875 2.365 XTL405(1)540P0A
8.0
480
360
16.6
90
135
180
270
- 35
+ 10
+ 20
154
306
0.875 3.532 XTH805(1)540P0A
14
480
300
15.0
120
162
205
160
- 40
+ 20
+ 35
178
309
1.125 2.435 XTV146(1)540P0A
20
480
300
15.0
135
182
230
170
- 40
+ 20
+ 35
196
309
1.125 2.435 XTV206(1)540P0A
3.5
560
420
18.9
55
82
110
630
- 35
+ 10
+ 20
133
249
0.875 2.720 XTL355(1)630P0A
7.0
560
420
18.9
90
135
180
315
- 35
+ 10
+ 20
179
308
0.875 4.062 XTH705(1)630P0A
630 VDC AT + 85 °C
12
560
420
17.5
120
162
205
180
- 40
+ 20
+ 35
204
306
1.125 2.810 XTV126T630P0A
18
560
420
17.5
135
182
230
200
- 40
+ 20
+ 35
225
306
1.125 2.810 XTV186(1)630P0A
Note
• Part number definitions:
(1) Tolerance code:
T = - 15 % to + 50 % (standard for XTK, XTM, XTV)
U = -15 % to + 75 % (standard for XTH, XTL)
M = ± 20 % (available by special order)
Revision: 25-Jul-11
4
Document Number: 42077
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
XTH, XTK, XTL, XTM, XTV
www.vishay.com
Vishay
XTH-L-V STYLES
STYLE A
STYLE B
STYLE C
H
0.3125 ± 0.0625
(+)
(+)
0.025 (+)
± 0.005
0.3125
± 0.0625
0.3125 ± 0.0625
Top
Bottom
0.375
± 0.0625
0.4375
DIA.
Top
STYLE D
STYLE E
Top
0.183
± 0.010
0.5625 ± 0.0625
0.385 MAX.
0.075 MAX.
0.065 MAX.
(+)
(+)
(+)
8-32UNC-2A
thread
Top
Bottom
Negative screw lug is for indexing and
negative connection only
STYLE G
0.3125 ± 0.0625 1/4-20UNC-3A
thread
0.500
± 0.0625
DIA.
Top
Bottom
See Detail C in Mounting Methods table
for suggested mounting methods
STYLE H
0.047
0.025 (+)
± 0.005
8-32UNC-2A
thread
Top
Bottom
Negative screw lug is for
index and negative
connection only
0.183
± 0.010
STYLE K
0.500
± 0.0625
DIA.
Top
Bottom
See Detail C in Mounting
Methods table for suggested
mounting methods
0.183
± 0.010
0.385 MAX.
0.075 MAX.
0.025 (+)
± 0.005
STYLE L
Wire hole
0.094 ± 0.010
0.4063
± 0.0625
0.500
DIA.
MAX.
Top
0.183
± 0.010
8-32UNC-2A
thread
Bottom
See Detail D in Mounting
Methods table for suggested
mounting methods
STYLE M
1/2-20UNF-2A THREAD
0.025 (+)
± 0.015
(+)
0.030 ± 0.020 XTH-XTL
0.060 ± 0.020 XTV
0.375
± 0.015
0.590
± 0.015
Top
(+)
0.030 ± 0.020 XTH-XTL
0.060 ± 0.020 XTV
0.3125 ± 0.0625
0.060
MAX.
0.125 MAX.
Top
0.500
± 0.010
0.500
± 0.010
Bottom
+ 0.007
- 0.005
See Details B and E in Mounting Methods table
for suggested mounting methods
Revision: 25-Jul-11
Bottom
See Detail D in Mounting Methods table
for suggested mounting method
0.3125
± 0.0625
Wire hole
1/4-20UNC-3A
0.094 ± 0.010 thread
0.4063
± 0.0625
1/2-20UNF-2A THREAD
0.375
± 0.015
0.500
DIA.
MAX.
Top
8-32UNC-2A
thread
STYLE J
0.025 (+)
± 0.005
Wire hole
0.094 ± 0.010
0.4063
± 0.0625
0.3125 ± 0.0625
0.3125 0.5625 ± 0.0625
± 0.0625
0.075 MAX.
0.500 ± 0.0625
0.3125 ± 0.0625
Bottom
STYLE F
0.500 ± 0.0625
0.047
0.375
Bottom
0.250
NOM.
D
0.3125 ± 0.0625
Wire hole
0.094 ± 0.010
0.4063
± 0.0625
0.375
Bottom
Top
Bottom
+ 0.007
- 0.005
See Detail B and E in Mounting Methods table
for suggested mounting methods
5
* Extends 0.125 on 0.875 DIA. units only
Document Number: 42077
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
XTH, XTK, XTL, XTM, XTV
www.vishay.com
Vishay
XTK-M STYLES
STYLE A
POS
STYLE B
NEG
STYLE E
POS
STYLE C
POS
POS
NEG
STYLE F
NEG
POS
STYLE G
POS
NEG
STYLE D
NEG
NEG
STYLE H
NEG
POS
POS
NEG
POSITIVE TERMINALS FOR XTK AND XTM
STYLE A
STYLE B, C AND D
STYLE E, G AND H
STYLE F
0.125
0.432
± 0.05
0.500 ± 0.062
2.250
± 0.025
0.432
± 0.05
0.062
0.812
± 0.062 0.555
± 0.015
0.125
0.285
MAX.
0.100 MAX.
3/8-24 UNF 2A
thread
3/8-24 UNF 2A
thread
0.035 DIA.
0.281
± 0.062
0.285
MAX.
0.812
± 0.062 0.555
± 0.015
0.750
± 0.020
H ± 0.062
0.020
± 0.015
Terminal detail
enlarged
H ± 0.062
0.020
± 0.015
H ± 0.062
NEGATIVE TERMINALS FOR XTK AND XTM
STYLE A
0.281
± 0.062
STYLE B, E AND F
2.250
± 0.025
STYLE C AND G
0.078 DIA.
hole
Case negative
Revision: 25-Jul-11
0.375
± 0.062
6-32NC 2A
thread
0.375
± 0.062
0.187
0.035 DIA.
0.656
± 0.025
STYLE D AND H
0.656
± 0.025
0.656
± 0.025
6
0.656
± 0.025
Document Number: 42077
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
XTH, XTK, XTL, XTM, XTV
www.vishay.com
Vishay
XTH, XTL AND XTV MOUNTING METHODS
DETAIL A
DETAIL B
0.511
0.505
0.093 ± 0.031
0.090
0.094 DIA. ± 0.004
0.535 ± 0.010
0.020 ± 0.007
Turret terminal
detail dimensions
(positive lead connections)
0.390
0.385
Configuration
L only
0.065 ± 0.006
For configurations A, B, C, D, E, F, G, H, J and M
Nut nearly flush
with ends of threads
For configurations K and L
DETAIL C
DETAIL D
Panel
0.625 DIA. counter
bore x 0.100.090 deep
(for head of weld screw)
Tapped 1/4-20UNC-2B
hole or internal
tooth lockwasher
and hex nut
Panel
Use 8-32 x 0.246 long
helical for non-ferrous
metal panel
Not recommended for
non-metal panels
0.375 MIN.
For configurations E and H
For configurations F and J
DETAIL E
0.511
0.505
Secure to
100 in, lbs. torque
1" DIA.
counterbore
1.250" DIA.
counterbore
for XTV units
Configuration
L only
Panel must be
rigidly fixed
0.090
0.390
0.385
Configuration
L only
0.375 MIN. recommended
thickness
May use rectangular hole
of similar dimensions
For configurations K and L
Note
• Standard mounting nut provided is plated steel. Stainless steel nut can be obtained by adding “/STN” suffix to part number.
04022 RATINGS AND CASE CODES
ESR MAX.
CAPACITANCE
RIPPLE DIMENSION
DSCC
CAP.
CAP.
DC LEAKAGE MAX.
IMPEDANCE
120 Hz
CHANGE
CURRENT
L
FIGURE
DRAWING (NOM.) TOLERANCE
(μA)
MAX.
25 °C
(%)
1/
± 0.062 (1.57)
04022
PIN
(μF)
(%)
+ 25 °C + 85 °C + 125 °C
()
()
- 55 °C + 85 °C + 125 °C
(mA)
(INCHES)
8 VDC AT + 85 °C RATED; 9.2 VDC AT + 85 °C SURGE
01
70
+ 50, - 15
6
30
48
12
60
- 60
+ 30
+ 30
137
0.438 (11.13)
1A
02
140
+ 50, - 15
10
50
80
5.9
30
- 60
+ 30
+ 30
213
0.562 (14.27)
1A
03
50
+ 50, - 15
5
04
100
+ 50, - 15
9
10 VDC AT + 85 °C RATED; 11.5 VDC AT + 85 °C SURGE
25
40
11.7
75
- 60
+ 30
+ 30
137
0.438 (11.13)
1A
45
72
5.9
40
- 60
+ 30
+ 30
213
0.562 (14.27)
1A
20 VDC AT + 85 °C RATED; 23 VDC AT + 85 °C SURGE
05
28
+ 50, - 15
6
30
48
12
85
- 40
+ 20
+ 20
137
0.438 (11.13)
1A
06
56
+ 50, - 15
10
50
80
6
45
- 40
+ 20
+ 20
213
0.562 (14.27)
1A
07
20
+ 50, - 15
7
35
56
11.7
125
- 40
+ 20
+ 20
137
0.438 (11.13)
1A
08
40
+ 50, - 15
12
60
96
5.9
75
- 40
+ 20
+ 20
213
0.562 (14.27)
1A
30 VDC AT + 85 °C RATED; 34.5 VDC AT + 85 °C SURGE
Revision: 25-Jul-11
7
Document Number: 42077
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
XTH, XTK, XTL, XTM, XTV
www.vishay.com
Vishay
04022 RATINGS AND CASE CODES
ESR MAX.
CAPACITANCE
RIPPLE DIMENSION
DSCC
CAP.
CAP.
DC LEAKAGE MAX.
IMPEDANCE
120 Hz
CHANGE
CURRENT
L
FIGURE
DRAWING (NOM.) TOLERANCE
(μA)
MAX.
25 °C
(%)
1/
± 0.062 (1.57)
04022
PIN
(μF)
(%)
+ 25 °C + 85 °C + 125 °C
()
()
- 55 °C + 85 °C + 125 °C
(mA)
(INCHES)
60 VDC AT + 85 °C RATED; 69 VDC AT + 85 °C SURGE
09
12
+ 50, - 15
7
35
56
12
180
- 30
+ 20
+ 20
137
0.438 (11.13)
1A
10
25
+ 50, - 15
12
60
96
6
90
- 30
+ 20
+ 20
213
0.562 (14.27)
1A
11
8.0
+ 50, - 15
7
35
56
12
250
- 30
+ 20
+ 20
137
0.438 (11.13)
1A
12
16
+ 50, - 15
12
60
96
5.9
125
- 30
+ 20
+ 20
213
0.562 (14.27)
1A
90 VDC AT + 85 °C RATED; 103 VDC AT + 85 °C SURGE
180 VDC AT + 85 °C RATED; 207 VDC AT + 85 °C SURGE
13
4.0
+ 50, - 15
7
35
56
24
500
- 30
+ 20
+ 20
117
0.719 (18.26)
1A
14
8.0
+ 50, - 15
12
60
96
12
250
- 30
+ 20
+ 20
186
0.938 (23.83)
1A
270 VDC AT + 85 °C RATED; 310 VDC AT + 85 °C SURGE
15
2.5
+ 50, - 15
7
16
5.0
+ 50, - 15
11
35
56
36
750
- 30
+ 20
+ 20
112
1.031 (26.19)
1A
55
88
18
375
- 30
+ 20
+ 20
179
1.375 (34.93)
1A
360 VDC AT + 85 °C RATED; 414 VDC AT + 85 °C SURGE
17
2.0
+ 50, - 15
7
18
4.0
+ 50, - 15
12
35
56
48
1000
- 30
+ 20
+ 20
108
1.312 (33.32)
1A
60
96
24
500
- 30
+ 20
+ 20
175
1.781 (45.24)
1A
20 VDC AT + 85 °C RATED; 23 VDC AT + 85 °C SURGE
19
100
+ 50, - 15
10
50
80
3.3
30
- 60
+ 15
+ 20
333
0.540 (13.72)
1B
20
200
+ 75, - 15
16
80
128
2.8
20
- 60
+ 15
+ 20
375
0.732 (18.59)
1B
21
75
+ 75, - 15
11
55
88
3.1
45
- 45
+ 10
+ 10
333
0.540 (13.72)
1B
22
150
+ 75, - 15
13
90
104
3
30
- 45
+ 10
+ 10
375
0.732 (18.59)
1B
30 VDC AT + 85 °C RATED; 34.5 VDC AT + 85 °C SURGE
60 VDC AT + 85 °C RATED; 69 VDC AT + 85 °C SURGE
23
40
+ 75, - 15
12
60
96
3.2
65
- 35
+ 10
+ 10
333
0.540 (13.72)
1B
24
80
+ 75, - 15
19
95
152
3.1
35
- 35
+ 10
+ 10
375
0.732 (18.59)
1B
90 VDC AT + 85 °C RATED; 103 VDC AT + 85 °C SURGE
25
25
+ 75, - 15
11
55
88
3.2
90
- 35
+ 10
+ 10
333
0.540 (13.72)
1B
26
50
+ 75, - 15
18
90
144
3.1
45
- 35
+ 10
+ 10
375
0.732 (18.59)
1B
180 VDC AT + 85 °C RATED; 207 VDC AT + 85 °C SURGE
27
12
+ 75, - 15
11
28
25
+ 75, - 15
18
55
88
6.6
180
- 35
+ 10
+ 10
282
0.920 (23.37)
1B
90
144
6.2
90
- 35
+ 10
+ 10
341
1.300 (33.02)
1B
270 VDC AT + 85 °C RATED; 310 VDC AT + 85 °C SURGE
29
8.0
+ 75, - 15
11
55
88
9.9
270
- 35
+ 10
+ 10
266
1.270 (32.36)
1B
30
16
+ 75, - 15
18
90
144
9.8
135
- 35
+ 10
+ 10
320
1.865 (47.37)
1B
31
6.0
+ 75, - 15
11
55
88
13
360
- 35
+ 10
+ 10
258
1.635 (41.53)
1B
32
12
+ 75, - 15
18
90
144
13
180
- 35
+ 10
+ 10
314
2.420 (61.47)
1B
33
5.0
+ 75, - 15
11
55
88
15
450
- 35
+ 10
+ 10
252
2.000 (50.80)
1B
34
10
+ 75, - 15
18
90
144
15
225
- 35
+ 10
+ 10
308
2.980 (75.69)
1B
360 VDC AT + 85 °C RATED; 414 VDC AT + 85 °C SURGE
450 VDC AT + 85 °C RATED; 518 VDC AT + 85 °C SURGE
540 VDC AT + 85 °C RATED; 621 VDC AT + 85 °C SURGE
35
4.0
+ 75, - 15
11
55
88
20
540
- 35
+ 10
+ 10
250
2.365 (60.07)
1B
36
8.0
+ 75, - 15
18
90
144
20
270
- 35
+ 10
+ 10
308
3.532 (89.71)
1B
+ 10
250
2.720 (69.09)
1B
630 VDC AT + 85 °C RATED; 724 VDC AT + 85 °C SURGE
37
3.5
Revision: 25-Jul-11
+ 75, - 15
11
55
88
22
630
- 35
+ 10
8
Document Number: 42077
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
XTH, XTK, XTL, XTM, XTV
www.vishay.com
Vishay
04022 RATINGS AND CASE CODES
ESR MAX.
CAPACITANCE
RIPPLE
DIMENSION
DSCC
CAP.
CAP.
DC LEAKAGE MAX.
IMPEDANCE
120 Hz
CHANGE
CURRENT
L
FIGURE
DRAWING (NOM.) TOLERANCE
(μA)
MAX.
25 °C
(%)
1/
± 0.062 (1.57)
04022
PIN
(μF)
(%)
+ 25 °C + 85 °C + 125 °C
()
()
- 55 °C + 85 °C + 125 °C
(mA)
(INCHES)
30 VDC AT + 85 °C RATED; 34.5 VDC AT + 85 °C SURGE
39
370
± 20
18
125
180
1.7
15
- 65 + 20
+ 25
550
0.600 (15.24)
1C
40
370
+ 50, - 15
18
125
180
1.7
15
- 65 + 20
+ 25
550
0.600 (15.24)
1C
41
650
± 20
21
145
210
1.8
15
- 85 + 20
+ 25
694
1.100 (27.94)
1C
42
650
+ 50, - 15
21
145
210
1.8
15
- 85 + 20
+ 25
694
1.100 (27.94)
1C
43
1300
± 20
27
190
270
1.8
10
- 85 + 20
+ 25
694
1.100 (27.94)
1C
44
1300
+ 50, - 15
27
190
270
1.8
10
- 85 + 20
+ 25
694
1.100 (27.94)
1C
60 VDC AT + 85 °C RATED; 69 VDC AT + 85 °C SURGE
45
200
± 20
19
135
190
1.8
30
- 50 + 20
+ 25
550
0.600 (15.24)
1C
46
200
+ 50, - 15
19
135
190
1.8
30
- 50 + 20
+ 25
550
0.600 (15.24)
1C
47
350
± 20
22
155
220
1.8
25
- 70 + 20
+ 25
694
1.100 (27.94)
1C
48
350
+ 50, - 15
22
155
220
1.8
25
- 70 + 20
+ 25
694
1.100 (27.94)
1C
49
700
± 20
29
200
290
1.8
15
- 70 + 20
+ 25
694
1.100 (27.94)
1C
50
700
+ 50, - 15
29
200
290
1.8
15
- 70 + 20
+ 25
694
1.100 (27.94)
1C
90 VDC AT + 85 °C RATED; 103 VDC AT + 85 °C SURGE
51
120
± 20
19
135
190
1.7
40
- 40 + 20
+ 25
550
0.600 (15.24)
1C
52
120
+ 50, - 15
19
135
190
1.7
40
- 40 + 20
+ 25
550
0.600 (15.24)
1C
53
220
± 20
21
145
210
1.8
30
- 60 + 20
+ 25
694
1.100 (27.94)
1C
54
220
+ 50, - 15
21
145
210
1.8
30
- 60 + 20
+ 25
694
1.100 (27.94)
1C
55
450
± 20
29
195
290
1.7
35
- 60 + 20
+ 25
694
1.100 (27.94)
1C
56
450
+ 50, - 15
29
195
290
1.7
35
- 60 + 20
+ 25
694
1.100 (27.94)
1C
180 VDC AT + 85 °C RATED; 207 VDC AT + 85 °C SURGE
57
42
± 20
17
120
170
6
75
- 40 + 20
+ 25
363
0.976 (24.79)
1C
58
42
+ 50, - 15
17
120
170
6
75
- 40 + 20
+ 25
363
0.976 (24.79)
1C
59
60
± 20
19
135
190
3.4
60
- 40 + 20
+ 25
363
0.976 (24.79)
1C
60
60
+ 50, - 15
19
135
190
3.4
60
- 40 + 20
+ 25
363
0.976 (24.79)
1C
61
110
± 20
21
145
210
3.5
60
- 60 + 20
+ 25
631
1.938 (49.23)
1C
62
110
+ 50, - 15
21
145
210
3.5
60
- 60 + 20
+ 25
631
1.938 (49.23)
1C
63
230
± 20
29
200
290
3.5
50
- 60 + 20
+ 25
631
1.938 (49.23)
1C
64
230
+ 50, - 15
29
200
290
3.5
50
- 60 + 20
+ 25
631
1.938 (49.23)
1C
270 VDC AT + 85 °C RATED; 310 VDC AT + 85 °C SURGE
65
28
± 20
19
120
190
9
80
- 40 + 20
+ 25
339
1.350 (34.29)
1C
66
28
+ 50, - 15
19
120
190
9
80
- 40 + 20
+ 25
339
1.350 (34.29)
1C
67
40
± 20
19
135
190
8.8
100
- 40 + 20
+ 25
339
1.350 (34.29)
1C
68
40
+ 50, - 15
19
135
190
8.8
100
- 40 + 20
+ 25
339
1.350 (34.29)
1C
69
75
± 20
21
145
210
5.2
90
- 60 + 20
+ 25
608
2.812 (71.42)
1C
70
75
+ 50, - 15
21
145
210
5.2
90
- 60 + 20
+ 25
608
2.812 (71.42)
1C
71
150
± 20
28
195
280
5.4
75
- 60 + 20
+ 25
608
2.812 (71.42)
1C
72
150
+ 50, - 15
28
195
280
5.4
75
- 60 + 20
+ 25
608
2.812 (71.42)
1C
360 VDC AT + 85 °C RATED; 414 VDC AT + 85 °C SURGE
73
22
± 20
18
125
180
11.4
100
- 40 + 20
+ 25
323
1.705 (43.31)
1C
74
22
+ 50, - 15
18
125
180
11.6
100
- 40 + 20
+ 25
323
1.705 (43.31)
1C
75
30
± 20
19
135
190
11.7
120
- 40 + 20
+ 25
323
1.705 (43.31)
1C
76
30
+ 50, - 15
19
135
190
11.7
120
- 40 + 20
+ 25
323
1.705 (43.31)
1C
450 VDC AT + 85 °C RATED; 518 VDC AT + 85 °C SURGE
77
17
± 20
18
125
180
15
130
- 40 + 20
+ 25
315
2.080 (52.83)
1C
78
17
+ 50, - 15
18
125
180
15
130
- 40 + 20
+ 25
315
2.080 (52.83)
1C
79
25
± 20
19
135
190
15
150
- 40 + 20
+ 25
315
2.080 (52.83)
1C
80
25
+ 50, - 15
19
135
190
15
150
- 40 + 20
+ 25
315
2.080 (52.83)
1C
540 VDC AT + 85 °C RATED; 621 VDC AT + 85 °C SURGE
81
14
± 20
17
120
170
18
160
- 40 + 20
+ 25
309
2.435 (61.85)
1C
82
14
+ 50, - 15
17
120
170
18
160
- 40 + 20
+ 25
309
2.435 (61.85)
1C
83
20
± 20
19
135
190
18
170
- 40 + 20
+ 25
309
2.435 (61.85)
1C
84
20
+ 50, - 15
19
135
190
18
170
- 40 + 20
+ 25
309
2.435 (61.85)
1C
630 VDC AT + 85 °C RATED; 724 VDC AT + 85 °C SURGE
85
12
± 20
17
120
170
16
180
- 40 + 20
+ 25
306
2.810 (71.37)
1C
86
12
+ 50, - 15
17
120
170
16
180
- 40 + 20
+ 25
306
2.810 (71.37)
1C
87
18
± 20
19
135
190
16
200
- 40 + 20
+ 25
306
2.810 (71.37)
1C
88
18
+ 50, - 15
19
135
190
16
200
- 40 + 20
+ 25
306
2.810 (71.37)
1C
Revision: 25-Jul-11
9
Document Number: 42077
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
XTH, XTK, XTL, XTM, XTV
www.vishay.com
Vishay
FIGURES
FIGURE 1A
Weld
0.656
± 0.025
2.250
± 0.250
2.250
± 0.250
+
0.035
± 0.005
CASE CIRCUIT
DIAGRAM
+
+
0.281
± 0.062
L
See 04022 Ratings table
0.281
± 0.062
-
+
FIGURE 1B
See Detail A
0.313 ± 0.062
0.094 ± 0.031
CASE NEG
0.875 DIA.
+ 0.031
- 0.015
0.094 DIA.
± 0.004
0.535 DIA.
± 0.010
L
See 04022
Ratings table
0.406
± 0.062
Solder fillet
permissible
0.025
± 0.005
0.193
MAX.
DETAIL A
SOLDER LUG
TERMINAL
FIGURE 1C
0.312
0.094 ± 0.031
0.094 DIA.
± 0.004
L
See 04022
Ratings table
Revision: 25-Jul-11
0.094 DIA. hole
± 0.010
0.183 ± 0.010
CASE NEG
1.125 DIA.
+ 0.031
- 0.016
Solder fillet
permissible
See Detail A
0.406
0.025
± 0.005
0.535 DIA.
± 0.010
10
Document Number: 42077
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1