Micro-D Latching MicroStri ps Series 171 MicroStrips Single Row Thru-Hole Board Mount Strips 171-004, 171-005, 171-006, and 171-007 Single Row Board Mount MicroStrips 171-006-7p-.125-p1cl These .050" pitch single row PCB thru-hole microstrips are available in four typesvertical mount, right angle single row and two right angle staggered versions. Available with 1 to 30 contacts. PC tails are .020" diameter. Optional latching mechanism prevents de-mating. Guide pins provide circuit polarization. Contacts are twistpin type and are gold-plated. Housing is molded LCP thermoplastic. Suitable for high-reliability applications where long-term resistance to fretting corrosion is a necessity. 3 A., 600 Vac, -55C to +150C. How To Order Single Row Thru-Hole PCB MicroStrips Series 171-004 Right Angle, Single Row PC Tails 171-005 Right Angle, Two Row PC Tails with .050" Between Rows Number of Cavities -1 to -30 Total Number of Cavities including guide pins,latches and mounting holes. The number of cavities equals the number of electrical circuits plus 1 cavity for each guide pin and latch, plus 6 cavities for the mounting hole option. Contact Type PC Tail Length (Inches) P .080 .110 .125 .150 .172 .190 .250 Pin Contacts S Socket Contacts Optional Guide Pin Omit For No Guide Pin -P1 Guide Pin in Cav. #1 Optional Latch Omit For No Latch CL Center Latch Optional Mounting Holes Omit For No Mounting Holes MH Mounting Holes Tail Length In Inches -PB Guide Pin at Both Ends 171-006 BL Latch at Both Ends -P(x) Right Angle, Two Row PC Tails with .100" Between Rows The three cavities on each end are filled with epoxy. Two .062" (1.57mm) holes are crossdrilled to allow for attachment to a mounting surface. Replace (X) with guide pin location. P3 shown below: 171-007 Vertical Mount Sample Part Number 171-006 © 2011 Glenair, Inc. -7 P -.125 U.S. CAGE Code 06324 -P1 Q CL Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Q-9 www.glenair.com Micro-D Latching MicroStri ps MWS MicroStrips Single Row Thru-Hole Board Mount Strips 171-004, 171-005, 171-006, and 171-007 PIN CONNECTOR SOCKET CONNECTOR .075 (1.91) TYP .075 (1.91) TYP 2Xø.062 (1.57) .050 (1.27) MAX C .125 (3.18) .050 (1.27) MAX .300 (7.62) 2Xø.062 (1.57) .110 (2.79) MAX .062 (1.57) .125 (3.18) C .135/.116 (3.43/2.95) .075 (1.91) MAX .075 (1.91) .075 (1.91) .200 (5.08) REF .075 (1.91) (A) B (A) B Dimensions # of Cavities 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 (A) B Max. C In. mm. In. mm. In. mm. .050 .100 .150 .200 .250 .300 .350 .400 .450 .500 .550 .600 .650 .700 1.27 2.54 3.81 5.08 6.35 7.62 8.89 10.16 11.43 12.70 13.97 15.24 16.51 17.78 .085 .135 .185 .235 .285 .335 .385 .435 .485 .535 .585 .635 .685 .735 .785 2.16 3.43 4.70 5.97 7.24 8.51 9.78 11.05 12.32 13.59 14.86 16.13 17.40 18.67 19.94 N/A N/A N/A N/A N/A N/A .200 .250 .300 .350 .400 .450 .500 .550 .600 N/A N/A N/A N/A N/A N/A 5.08 6.35 7.62 8.89 10.16 11.43 12.7 13.97 15.24 # of Cavities 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 (A) B Max. C In. mm. In. mm. In. mm. .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 1.400 1.450 19.05 20.32 21.59 22.86 24.13 25.40 26.67 27.94 29.21 30.48 31.75 33.02 34.29 35.56 36.83 .835 .885 .935 .985 1.035 1.085 1.135 1.185 1.235 1.285 1.335 1.385 1.435 1.485 1.535 21.21 22.48 23.75 25.02 26.29 27.56 28.83 30.10 31.37 32.64 33.91 35.18 36.45 37.72 38.99 .650 .700 .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 16.51 17.78 19.05 20.32 21.59 22.86 24.13 25.4 26.67 27.94 29.21 30.48 31.75 33.02 34.29 Center Latch Locations Even Number of Cavities Odd Number of Cavities PIN CONNECTOR SOCKET CONNECTOR CAVITY 1 Q PIN CONNECTOR SOCKET CONNECTOR CAVITY 1 CAVITY 1 Latch placed on next lower cavity prior to centerline. Latch position = (# of Cavities) ÷ 2. © 2011 Glenair, Inc. U.S. CAGE Code 06324 CAVITY 1 Latch placed in cavity on centerline. Latch Position = (# of Cavities+1) ÷ 2. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Q-10 www.glenair.com Micro-D Latching MicroStri ps Series 171 MicroStrips Single Row Board Mount Strips PCB layouts: 171-004 and 171-005 PRINTED CIRCUIT BOARD LAYOUTS TYPE PIN CONNECTOR SOCKET CONNECTOR 171-004 PC TAIL LENGTH ø.020 (0.51) .100 (2.54) ø.020 (0.51) .100 (2.54) .225 (5.72) .400 (10.16) Right Angle Single Row .050" (1.27) Centers .050 (1.27) TYP POSITION 1 PC TAIL LENGTH POSITION 1 .050 (1.27) TYP 171-005 PC TAIL LENGTH Right Angle Staggered .050" (1.27) Offset ø.020 (0.51) .050 (1.27) .100 (2.54) ø.020 (0.51) .050 (1.27) (.400) PLUG POSITION 1 .100 (2.54) TYP .050 (1.27) TYP PC TAIL LENGTH .100 (2.54) .225 (5.72) POSITION 1 .100 (2.54) TYP .050 (1.27) TYP Q © 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Q-11 www.glenair.com Micro-D Latching MicroStri ps Series 171 MicroStrips Single Row Board Mount Strips PCB layouts: 171-006 and 171-007 PRINTED CIRCUIT BOARD LAYOUTS TYPE PIN CONNECTOR SOCKET CONNECTOR 171-006 ø.020 (0.51) .100 (2.54) .100 (2.54) PC TAIL LENGTH Right Angle Staggered .100" (2.54) Offset PC TAIL LENGTH .225 (5.72) .400 (10.16) .100 (2.54) TYP POSITION 1 POSITION 1 .100 (2.54) TYP .050 (1.27) TYP .050 (1.27) TYP 171-007 PC TAIL LENGTH PC TAIL LENGTH .100 (2.54) .120 (3.05) Vertical Mount .100" (2.54) Spacing ø.020 (0.51) .100 (2.54) .100 (2.54) 1 .100 (2.54) 3 2 ø.020 (0.51) .100 (2.54) .100 (2.54) 4 6 .050 (1.27) 6 .100 (2.54) 1 3 5 7 7 5 .120 (3.05) ø.020 (0.51) 4 2 .100 (2.54) .050 (1.27) Q © 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Q-12 www.glenair.com