OMRON G6RL

PCB Relay
G6RL
Low-profile power relay with maximum
switching of 10 A
• Low profile: 12.3 mm in height
• Max. switching capacity: 2,500 VA (NO)
• IEC 60947-5-1, AC-15, DC13
• Clearance and creepage distance: 10 mm.
• Models with high shock resistance (250 m/s2) are available.
• Models for P1 load (2 × 200 W lamps parallel to ignition
transformer) are available.
• RoHS Compliant
Applications:
Boilers, PLCs, I/O ports, timers, and temperature controllers
Ordering Information
Classification
Enclosure rating
Standard
P1 Load
AgSnIn
AgNi
Flux protection
SPST-NO
G6RL-1A-ASI
G6RL-1A
SPDT
G6RL-1-ASI
G6RL-1
Fully sealed
SPST-NO
G6RL-1A4-ASI
---
SPDT
G6RL-14-ASI
---
SPST-NO
G6RL-1A-ASI-PL
---
SPDT
G6RL-1-ASI-PL
---
Flux protection
SPST-NO
---
---
SPDT
G6RL-1-SR-ASI
---
Fully sealed
SPST-NO
---
---
SPDT
G6RL-14-SR-ASI
---
Flux protection
Shock resistance
Contact material
Contact form
Note: When ordering, add the rated coil voltage to the model number.
Examples: G6RL-1A DC12
Rated coil voltage
■ Model Number Legend:
[email protected]@@[email protected]@[email protected] [email protected]
1 2 3
4
5
6
7
1. Number of Poles
1:
1 pole
2. Contact Form/Contact Construction
None: SPDT
A:
SPST-NO
3. Enclosure Rating
None: Flux protection
4:
Fully sealed
4. Special Function 1
SR: Shock resistance of 25G
5. Contact material
None: AgNi
ASI: AgSnIn
6. Special Function 2
PL: P1 load (See note.)
7. Rated Coil Voltage
3, 5, 6, 12, 24, or 48
Note: Please refer to Endurance Under Real Load table in this
datasheet.
PCB Relay
G6RL
179
Specifications
■ Coil Ratings
Classification
Standard, P1 load
Shock resistance
Rated voltage
3 VDC
5 VDC
6 VDC
12 VDC
24 VDC
48 VDC
3 VDC
5 VDC
6 VDC
12 VDC
24 VDC
Rated current
73.3 mA
44 mA
36.7 mA
18.3 mA
9.2 mA
5 mA
101 mA
60.2 mA
50.1 mA
25.2 mA
12.6 mA
Coil resistance
40 Ω
113 Ω
163 Ω
654 Ω
2,618 Ω
9,600 Ω
30 Ω
83 Ω
120 Ω
476 Ω
1,912 Ω
Must operate voltage 70% max. of rated voltage
80% max. of rated voltage
Must release voltage 10% min. of rated voltage
10% min. of rated voltage
Max. voltage
150% of rated voltage
150% of rated voltage (23°C)
Power consumption
Approx. 220 mW
Approx.
240 mW
Approx. 300 mW
Note: 1. The above items are measured at a coil temperature of 23°C.
2. The tolerance of the rated current is ±10%.
■ Contact Ratings
Load
Resistive load (cos φ = 1)
Rated load (See note 1.)
10 A at 250 VAC, NO resistive load
8 A at 250 VAC, resistive load
5 A at 30 VDC, resistive load
Rated carry current
10 A at 250 VAC
5 A at 30 VDC
Max. switching voltage
400 VAC, 300 VDC
Max. switching current
NO: 10 A, NC: 8 A
Max. switching power
NO: 2,500 VA, NC: 2,000 VA
150 W
Failure rate (reference value) 10 mA at 5 VDC (P level) (See note 2.)
Note: 1. G6RL-1(A), G6RL-1(A)4-ASI: 8 A 250 VAC, resistive load; 5 A 24 VDC resistive load.
2. P level: λ 60 = 0.1 × 10−6 / operations
■ Characteristics
Contact resistance
100 mΩ max.
Operate time
10 ms max. (SR Models: 15 ms max.)
Release time
5 ms max.
Insulation resistance
1,000 MΩ min. (at 500 VDC)
Dielectric strength
5,000 VAC, 50/60 Hz for 1 min between coil and contacts
1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity
Impulse withstand voltage
10 kV between coil and contacts (1.2 × 50 μs)
Vibration resistance
Destruction:
Malfunction:
Shock resistance
Destruction: 1,000 m/s2
Malfunction: NO: 200 m/s2, NC: 50 m/s2 when not energized
SR Models: 250 m/s2 (NO and NC) when not energized
Endurance
Mechanical: 10,000,000 operations min. (at 18,000 operations/hr)
Ambient temperature
Operating: −40°C to 85°C (with no icing)
Ambient humidity
Operating: 5% to 85%
Weight
Approx. 7.8 g
180
PCB Relay
G6RL
10 to 55 to 10 Hz, 1.5-mm double amplitude
10 to 55 to 10 Hz, 0.825-mm single amplitude (1.65-mm double amplitude) when energized.
10 to 55 to 10 Hz, 0.4-mm single amplitude (0.8-mm double amplitude) when not energized.
■ Other Data
Construction of protection
Flux protection
Fully sealed
Insulation material group
IIIa
Rated insulation voltage
250 V
Pollution degree
3
2
Rated voltage system
250 V
400 V
Overvoltage category
III
Creepage distance
10 mm
Clearance distance
10 mm
RoHS
Compliant
Tracking index of relay base
PTI 250
Flammability class according to UL94 V-0
Flammability-flame
GWFI (IEC 60695-2-12)
850°C
GWIT (IEC 60695-2-13)
750°C
Ball pressure test (IEC 60695-10-2)
170°C
■ Approved Standards
UL Recognized (File No. E41643) - - Ambient Temp. = 85°C
Models
G6RL-1A
Contact form
SPST-NO
G6RL-1
SPDT
G6RL-1A(4)-ASI
SPST-NO
G6RL-1(4)-ASI
SPDT
G6RL-1(4)-SR-ASI
SPDT
Coil rating
3 to 48 VDC
Contact rating
10 A at 250 VAC (NO) (Resistive) 6,000 operations
8 A at 250 VAC (Resistive)
5 A at 30 VDC (Resistive)
3 to 24 VDC
VDE (EN61810-1) (Certificate No.C266)
Models
Contact form
G6RL-1A-(ASI)
SPST-NO
G6RL-1-(ASI)
SPDT
G6RL-1A4-ASI (See note.)
SPST-NO
G6RL-14-ASI (See note.)
SPDT
G6RL-1(4)-SR-ASI
SPDT
Coil rating
Contact rating
Model
3, 5, 6, 12, 24, or 48 VDC 10 A at 250 VAC (NO) 10,000 operations at 85°C
8 A at 250 VAC
30,000 operations at 85°C
5 A at 30 VDC
50,000 operations at 85°C
3, 5, 6, 12, 24, or 48 VDC 10 A at 250 VAC (NO) 10,000 operations at 85°C
3, 5, 6, 12 or 24 VDC
8 A at 250 VAC
10,000 operations at 85°C
5 A at 30 VDC
10,000 operations at 85°C
10 A at 250 VAC (NO) 10,000 operations at 85°C
8 A at 250 VAC
10,000 operations at 85°C
5 A at 30 VDC
10,000 operations at 85°C
Note: In progress
PCB Relay
G6RL
181
VDE (60947-5-1) (Certificate No. C266)
Contact rating
Models
G6RL-1(A)
Utilization category
AC15 (NO)
G6RL-1(A)-ASI
G6RL-1(A)4-ASI (See note.)
G6RL-1(4)-SR-ASI
Rated voltage (V)
Ie: 3 A, Ithe: 10 A (A300)
AC240
Operations
6,000
AC15 (NO)
Ie: 3 A, Ithe: 5 A (B300)
AC120
6,000
AC15 (NO)
Ie: 1.5 A, Ithe: 5 A (B300)
AC240
6,000
DC13
Ie: 0.22A, Ithe: 1A (R150)
DC125
6,000
DC13 (See note.)
Ie: 0.1 A, Ithe: 1 A (R300)
DC250
6,000
AC15
Ie: 3 A, Ithe: 10 A (A300)
AC240
6,000
AC15
Ie: 3 A, Ithe: 5 A (B300)
AC120
6,000
AC15
Ie: 1.5 A, Ithe: 5 A (B300)
AC240
6,000
DC13
Ie: 0.22 A, Ithe: 1 A (R150)
DC125
6,000
DC13 (See note.)
Ie: 0.1 A, Ithe: 1 A (R300)
DC250
6,000
Note: 1. In progress
2. All ratings are valid at Room Temperature
VDE (60947-4-1) (Certificate No. C266)
Contact rating
Models
G6RL-1(A)
G6RL-1(A)-ASI (See note.)
Utilization category
Rated voltage (V)
Operations
AC1
8A
AC250
6,000
AC3
2A
AC250
6,000
DC1
5A
DC24
6,000
DC3
2A
DC24
6,000
Note: 1. In progress
2. All ratings are valid at Room Temperature
VDE (EN60730-1) (Certificate No. C266)
Contact rating
Models
G6RL-1(A)
G6RL-1(A)-ASI (See note.)
Utilization category
PCB Relay
Operations
2 (2) A
65°C
AC250
100,000
8 (4) A (NO)
85°C
AC250
100,000
6 (4) A (NO)
85°C (See note.)
AC250
100,000
6 (4)A (NO)
65°C
AC250
100,000
6 (4) A (NC)
65°C
AC250
100,000
2 (2) A
65°C
AC250
100,000
8 (4) A (NO)
85°C
AC250
100,000
6 (4) A (NO)
85°C
AC250
100,000
6 (4) A (NC)
65°C
AC250
100,000
Note: In progress
182
Rated voltage (V)
G6RL
Electrical Endurance Data
G6RL-1(A)
8 A at 250 VAC (cosφ = 1) NO
G6RL-1(A)-(SR)-ASI-(PL)
G6RL-1(A)4-ASI
G6RL-14-SR-ASI
50,000 operations min.
8 A at 250 VAC (cosφ = 1) NC
50,000 operations min.
5 A at 24 VDC
50,000 operations min.
10 A at 250 VAC (cosφ = 1) NO
100,000 operations min.
8 A at 250 VAC (cosφ = 1)
100,000 operations min.
5 A at 30 VDC
50,000 operations min.
8 A at 250 VAC (cosφ = 1) NO
50,000 operations min.
8 A at 250 VAC (cosφ = 1) NC
50,000 operations min.
5 A at 24 VDC
50,000 operations min.
8 A at 250 VAC (cosφ = 1) NO
50,000 operations min.
3 A at 250 VAC (cosφ = 1) NC
100,000 operations min.
5 A at 24 VDC NO
50,000 operations min.
5 A at 24 VDC NC
30,000 operations min.
Endurance Under Real Load
(Reference Only)
G6RL-1(A)-ASI-PL
Rated voltage
230 VAC
Condition
P1 load (2 × 200 W lamps parallel to ignition transformer)
Frequency
1.5 s ON/4.5 s OFF
Electrical life
250,000 operations
Note: The results shown reflect values measured using very severe test conditions, i.e., Duty: 1 s ON/OFF.
Electrical endurance will vary depending on the test conditions. Contact your OMRON representative if you require more detailed information
for the electrical endurance under your test conditions.
PCB Relay
G6RL
183
Engineering Data
Endurance
Switching operations ( 103 operations)
G6RL-1(A)
Maximum Switching Capacity
Switching current (A)
G6RL-1(A)(4)-(SR)-(ASI)-(PL)
100
50
AC resistive load (N.O.)
AC resistive load (N.C.)
DC resistive load
10
5
1
1,000
250-VAC inductive load
(cos φ = 0.4)
500
300
250-VAC resistive load (N.O.)
100
50
24-VDC resistive load
30
0.5
10
0
0.1
1
3
5
10
30 50
100
300 500 1,000
2
4
6
8
10
Switching current (A)
Switching voltage (V)
G6RL-1(A)(4)-(ASI)-(PL)
Ambient Temperature vs.
Maximum Coil Voltage
Ambient Temperature vs. Must
Operate or Must Release Voltage
200
On the basis of rated voltage (%)
Maximum coil voltage (%)
G6RL-1(A)(4)-(SR)-(ASI)-(PL)
180
G6RL-1 (220 mW)
160
150
140
120
G6RL-1-SR (300 mW)
120
Sample: G6RL 24 VDC
Number of relays: 5
Must operate voltage
Must release voltage
100
max.
X
min.
80
60
40
max.
X
min.
100
20
80
60
−40
20 23 30
40
50
60
70
80
0
−40
90 100
−20
0
20
40
60
80
100
Ambient temperature (°C)
Ambient temperature (°C)
Note: The “maximum coil voltage” refers to the maximum value in a varying range of operating voltage, not a continuous voltage.
Dimensions
Note: All units are in millimeters unless otherwise indicated.
G6RL-1A(-ASI)
G6RL-1A4(-ASI)
Terminal Arrangement/
Internal Connections
(Bottom View)
5±0.1
18.9±0.1
(1.7)
1
2
5
0.8
1
0.
G6RL-1(-ASI)
G6RL-14(-ASI)
Fo
Note: Indicates average dimensions.
Terminal Arrangement/
Internal Connections
(Bottom View)
Mounting Holes
(Bottom View)
(1.5)
18.9±0.1
3.2±0.1
3.2±0.1
10.0 max.
28.5 max.
a.
di
±
.3
,1
ur
7.62±0.1
0.8
12.3 max.
0.4
3
3.2
0.24
(2.9)
10.0 max.
28.5 max.
0.4
Mounting Holes
(Bottom View)
(1.7)
2
1
3
184
PCB Relay
G6RL
0.8
0.8
7.62±0.1
0.4
Fiv
e,
1
0.24
3.2
0.4
12.3 max.
0.4
.3±
0.1
dia
.
5
4
Note: Indicates average dimensions.
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
These terms and conditions
(b) Seller:
Omron Electronic Components LLC and its subsidiaries
(c) Buyer:
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at the time the purchase order is accepted by
Seller. Payments for Products received are due net 30 days unless otherwise stated in
the invoice. Buyer shall have no right to set off any amounts against the amount owing in
respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real
property and income taxes), including any interest or penalties thereon, imposed directly
or indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license
taxes) shall be charged to and remitted by Buyer to Seller.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel
any unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products
shall pass from Seller to Buyer, provided that Seller shall retain a security interest in
the Products until the full purchase price is paid by Buyer;
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier or any claim related to pricing or other charges
must be presented in detail in writing to Seller within 30 days of receipt of shipment.
III. PRECAUTIONS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
(b) Use in consumer Products or any use in significant quantities.
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
IV. WARRANTY AND LIMITATION
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
correctly handled, stored, installed and maintained and not subject to contamination,
abuse, misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
V. INFORMATION; ETC.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and descriptions may be changed at
any time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c) disclosure to noncitizens of regulated technology or information.
VI. MISCELLANEOUS
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).
Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any
dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
PCB Relay
G6RL
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in
Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
3. Performance Data. Performance data given in this publication is provided as
a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
Global - http://www.omron.com
USA - http://www.components.omron.com
847-882-2288
Cat. No. X301-E-1
PCB Relay
06/09
G6RL
Specifications subject to change without notice
Printed in USA