VISHAY V10PL45

V10PL45
www.vishay.com
Vishay General Semiconductor
High Current Density Surface Mount
Trench MOS Barrier Schottky Rectifier
Ultra Low VF = 0.28 V at IF = 5 A
FEATURES
TMBS®
eSMP® Series
• Very low profile - typical height of 1.1 mm
• Ideal for automated placement
• Trench MOS Schottky technology
K
• Low forward voltage drop, low power losses
• High efficiency operation
1
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
2
• Compliant to RoHS Directive 2011/65/EU
• Halogen-free according to IEC 61249-2-21 definition
TO-277A (SMPC)
K
Anode 1
Cathode
Anode 2
TYPICAL APPLICATIONS
For use in low voltage high frequency DC/DC converters,
freewheeling, and polarity protection applications.
MECHANICAL DATA
PRIMARY CHARACTERISTICS
IF(AV)
10 A
VRRM
45 V
IFSM
200 A
VF at IF = 10 A
0.35 V
TJ max.
150 °C
Case: TO-277A (SMPC)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS compliant, and
commercial grade
Terminals: Matte tin plated leads, solderable
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test
per
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
Maximum repetitive peak reverse voltage
Maximum DC forward current
Peak forward surge current 10 ms single half sine-wave
superimposed on rated load
Operating junction and storage temperature range (AC mode)
V10PL45
UNIT
V10L45
VRRM
45
IF (1)
10
IF (2)
6.0
IFSM
200
TJ, TSTG
- 40 to + 150
V
A
°C
Notes
(1) Mounted on 30 mm x 30 mm pad areas aluminum PCB
(2) Free air, mounted on recommended copper pad area
Revision: 23-Feb-12
Document Number: 89479
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V10PL45
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
IF = 5.0 A
TA = 25 °C
IF = 10 A
Instantaneous forward voltage
VF (1)
IF = 5.0 A
TA = 125 °C
IF = 10 A
TA = 25 °C
VR = 45 V
Reverse current
SYMBOL
TA = 125 °C
IR (2)
TYP.
MAX.
0.39
-
0.44
0.52
0.28
-
0.35
0.43
-
5.0
30
75
UNIT
V
mA
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance
SYMBOL
V10PL45
RJA (1)
68
RJM (2)
4
UNIT
°C/W
Notes
(1) Free air, mounted on recommended copper pad area; thermal resistance R
JA - junction to ambient
(2) Mounted on 30 mm x 30 mm aluminum PCB; thermal resistance R
JM - junction to mount
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
V10PL45-M3/86A
0.10
86A
1500
7" diameter plastic tape and reel
V10PL45-M3/87A
0.10
87A
6500
13" diameter plastic tape and reel
RATINGS AND CHARACTERISTICS CURVES
Average Forward Rectified Current (A)
(TA = 25 °C unless otherwise noted)
Notes
(1) Mounted on 30 mm x 30 mm aluminum PCB; T
M measured
at the terminal of cathode band (RJM = 4 °C/W)
(2) Free air, mounted on recommended copper pad area
(RJA = 68 °C/W)
12
TM = 130 °C
10
8
TA = 25 °C
6
4
2
0
0
25
50
75
100
125
150
175
TM - Mount Temperature (°C)
Fig. 1 - Maximum Forward Current Derating Curve
Revision: 23-Feb-12
Document Number: 89479
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V10PL45
www.vishay.com
Average Power Loss (W)
D = 0.2
D = 0.3
D = 0.1
4.0
10 000
D = 0.5 D = 0.8
D = 1.0
3.0
2.0
T
1.0
D = tp/T
Junction Capacitance (pF)
5.0
Vishay General Semiconductor
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
1000
tp
0.0
100
0
2
4
6
8
10
0.1
12
1
Average Forward Current (A)
Fig. 5 - Typical Junction Capacitance
Transient Thermal Impedance (°C/W)
Instantaneous Forward Current (A)
100
TA = 150 °C
TA = 125 °C
TA = 100 °C
1
TA = 25 °C
0.1
0
0.1
0.2
0.3
0.4
0.5
0.6
Instantaneous Forward Voltage (V)
100
Junction to Ambient
10
1
0.01
0.1
1
10
100
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Instantaneous Reverse Current (mA)
100
Reverse Voltage (V)
Fig. 2 - Forward Power Loss Characteristics
10
10
Fig. 6 - Typical Transient Thermal Impedance
1000
TA = 150 °C
100
TA = 125 °C
10
TA = 100 °C
1
0.1
TA = 25 °C
0.01
0.001
20
40
60
80
100
Percent of Rated Peak Reverse Voltage (%)
Fig. 4 - Typical Reverse Leakage Characteristics
Revision: 23-Feb-12
Document Number: 89479
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V10PL45
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-277A (SMPC)
0.187 (4.75)
0.175 (4.45)
0.016 (0.40)
0.006 (0.15)
K
0.262 (6.65)
0.250 (6.35)
0.242 (6.15)
0.238 (6.05)
2
1
0.047 (1.20)
0.039 (1.00)
0.171 (4.35)
0.167 (4.25)
0.146 (3.70)
0.134 (3.40)
Mounting Pad Layout
0.087 (2.20)
0.075 (1.90)
0.189 (4.80)
MIN.
0.189 (4.80)
0.173 (4.40)
0.186 (4.72)
MIN.
0.268
(6.80)
0.155 (3.94)
NOM.
0.030 (0.75) NOM.
0.049 (1.24)
0.037 (0.94)
0.050 (1.27)
MIN.
0.084 (2.13) NOM.
0.053 (1.35)
0.041 (1.05)
0.041
(1.04)
0.055 (1.40)
MIN.
Conform to JEDEC TO-277A
Revision: 23-Feb-12
Document Number: 89479
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000