RN4907 TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process) Silicon NPN Epitaxial Type (PCT Process) RN4907 Switching, Inverter Circuit, Interface Circuit And Driver Circuit Applications Unit: mm l Includeing two devices in US6 (ultra super mini type with 6 leads) l With built-in bias resistors l Simplify circuit design l Reduce a quantity of parts and manufacturing process Equivalent Circuit and Bias Resister Values R1: 10kΩ R2: 47kΩ (Q1, Q2 Common) Q1 Maximum Ratings (Ta = 25°°C) Characteristic Symbol Rating Unit Collector-base voltage VCBO −50 V Collector-emitter voltage VCEO −50 V Emitter-base voltage VEBO −6 V IC −100 mA Symbol Rating Unit Collector-base voltage VCBO 50 V Collector-emitter voltage VCEO 50 V Emitter-base voltage VEBO 6 V IC 100 mA Collector current JEDEC EIAJ TOSHIBA Weight: 6.8mg ― ― 2-2J1A Q2 Maximum Ratings (Ta = 25°°C) Characteristic Collector current 1 2001-06-07 RN4907 Q1, Q2 Common Maximum Ratings (Ta = 25°°C) Characteristic Collector power dissipation Junction temperature Storage temperature range * Symbol Rating Unit PC * 200 mW Tj 150 °C Tstg −55~150 °C Total rating Marking Equivalent Circuit (Top View) Q1 Electrical Characteristics (Ta = 25°C) Characteristic Collector cut-off current Emitter cut-off current DC current gain Symbol Test Circuit ICBO ― ICEO IEBO Test Condition Min Typ. Max Unit VCB = −50V, IE = 0 ― ― −100 ― VCE = −50V, IB = 0 ― ― −500 ― VEB = −6V, IC = 0 −0.081 ― −0.15 mA nA hFE ― VCE = −5V, IC = −10mA 80 ― ― ― VCE (sat) ― IC = −5mA, IB = −0.25mA ― −0.1 −0.3 V Input voltage (ON) VI (ON) ― VCE = −0.2V, IC = −5mA −0.7 ― −1.8 V Input voltage (OFF) VI (OFF) ― VCE = −5V, IC = −0.1mA −0.5 ― −1.0 V Transition frequency fT ― VCE = −10V, IC = −5mA ― 200 ― MHz Cob ― VCB = −10V, IE = 0 ― 3 6 pF Collector-emitter saturation voltage Collector output capacitance 2 2001-06-07 RN4907 Q2 Electrical Characteristics (Ta = 25°C) Characteristic Collector cut-off current Emitter cut-off current DC current gain Symbol Test Circuit ICBO ― ICEO IEBO Test Condition Min Typ. Max Unit VCB = 50V, IE = 0 ― ― 100 ― VCE = 50V, IB = 0 ― ― 500 ― VEB = 6V, IC = 0 0.081 ― 0.15 mA nA hFE ― VCE = 5V, IC = 10mA 80 ― ― ― VCE (sat) ― IC = 5mA, IB = 0.25mA ― 0.1 0.3 V Input voltage (ON) VI (ON) ― VCE = 0.2V, IC = 5mA 0.7 ― 1.8 V Input voltage (OFF) VI (OFF) ― VCE = 5V, IC = 0.1mA 0.5 ― 1.0 V Transition frequency fT ― VCE = 10V, IC = 5mA ― 250 ― MHz Cob ― VCB = 10V, IE = 0, f = 1 MHz ― 3 6 pF Collector-emitter saturation voltage Collector output capacitance Q1, Q2 Common Electrical Characteristics (Ta = 25°C) Symbol Test Circuit Test Condition Min Typ. Max Unit Input resistor R1 ― ― 7 10 13 kΩ Resistor ratio R1/R2 ― ― 0.191 0.213 0.232 ― Characteristic 3 2001-06-07 RN4907 4 2001-06-07 RN4907 RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 5 2001-06-07 This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.