RN47A1 TOSHIBA Transistor Silicon NPN·PNP Epitaxial Type (PCT process) (Bias Resistor built-in Transistor) RN47A1 Switching, Inverter Circuit, Interface Circuit and Driver Circuit Applications Unit: mm • Two devices are incorporated into an Ultra-Super-Mini (5 pin) package. • Incorporating a bias resistor into a transistor reduces parts count. Reducing the parts count enables the manufacture of ever more compact equipment and lowers assembly cost. Equivalent Circuit and Bias Resistor Values Q1 Q2 C B C R1 B E R1 E JEDEC ― R1: 4.7 kΩ (Q1, Q2 common) JEITA ― Q1: RN1110F TOSHIBA Q2: RN2110F Weight:0.0062g (typ.) Marking 2-2L1D Equivalent Circuit (top view) 5 5 4 Q2 21 1 2 4 Q1 1 3 1 2 3 2004-04-28 RN47A1 Maximum Ratings (Ta = 25°C) (Q1) Characteristics Symbol Rating Unit Collector-base voltage VCBO 50 V Collector-emitter voltage VCEO 50 V Emitter-base voltage VEBO 5 V IC 100 mA Symbol Rating Unit Collector-base voltage VCBO −50 V Collector-emitter voltage VCEO −50 V Emitter-base voltage VEBO −5 V IC −100 mA Collector current Maximum Ratings (Ta = 25°C) (Q2) Characteristics Collector current Maximum Ratings (Ta = 25°C) (Q1, Q2 common) Characteristics Collector power dissipation Junction temperature Storage temperature range Symbol Rating Unit 200 mW Tj 150 °C Tstg −55~150 °C PC (Note) Note: Total rating 2 2004-04-28 RN47A1 Electrical Characteristics (Ta = 25°C) (Q1) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = 50 V, IE = 0 ⎯ ⎯ 100 nA Emitter cut-off current IEBO VEB = 5 V, IC = 0 ⎯ ⎯ 100 nA hFE VCE = 5 V, IC = 1 mA DC current gain Collector-emitter saturation voltage Transition frequency VCE (sat) fT Collector output capacitance Cob Input resistor R1 120 ⎯ 700 IC = 5 mA, IB = 0.25 mA ⎯ 0.1 0.3 V VCE = 10 V, IC = 5 mA ⎯ 250 ⎯ MHz VCB = 10 V, IE = 0, f = 1 MHz ⎯ 3 ⎯ pF ⎯ 3.29 4.7 6.11 kΩ Test Condition Min Typ. Max Unit Electrical Characteristics (Ta = 25°C) (Q2) Characteristics Symbol Collector cut-off current ICBO VCB = −50 V, IE = 0 ⎯ ⎯ −100 nA Emitter cut-off current IEBO VEB = −5 V, IC = 0 ⎯ ⎯ −100 nA hFE VCE = −5 V, IC = −1 mA DC current gain Collector-emitter saturation voltage Transition frequency VCE (sat) fT Collector output capacitance Cob Input resistor R1 120 ⎯ 400 IC = −5 mA, IB = −0.25 mA ⎯ −0.1 −0.3 V VCE = −10 V, IC = −5 mA ⎯ 200 ⎯ MHz VCB = −10 V, IE = 0, f = 1 MHz ⎯ 3 ⎯ 3 ⎯ pF 3.29 4.7 6.11 kΩ 2004-04-28 RN47A1 (mA) Q1 4 2004-04-28 RN47A1 (µA) (mA) Q2 5 2004-04-28 RN47A1 Q1, Q2 Common Pc* – Ta POWER DISSIPATION PC (mW) 400 300 200 100 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE Ta (°C) *:Total Rating 6 2004-04-28 RN47A1 RESTRICTIONS ON PRODUCT USE 030619EAA • The information contained herein is subject to change without notice. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. 7 2004-04-28