RN47A5 TOSHIBA Transistor Silicon NPN·PNP Epitaxial Type (PCT process) (Bias Resistor built-in Transistor) RN47A5 Switching, Inverter Circuit, Interface Circuit and Driver Circuit Applications. · Unit: mm Two devices are incorporated into an Ultra-Super-Mini (5 pin) package. · Incorporating a bias resistor into a transistor reduces parts count. Reducing the parts count enable the manufacture of ever more compact equipment and save assembly cost. Equivalent Circuit and Bias Resistor Values Q1 Q2 C R1 R1 R2 B R2 B C E E Q1 JEDEC ― JEITA ― TOSHIBA ― Weight: R1: 47 kΩ, R2: 47 kΩ g (typ.) Q2 R1: 4.7 kΩ, R2: 10 kΩ Q1: RN1104F Q2: RN2116F Marking Equivalent Circuit (top view) 5 4 5 25 1 2 4 Q2 Q1 3 1 1 2 3 2002-01-30 RN47A5 Maximum Ratings (Ta = 25°C) (Q1) Characteristics Symbol Rating Unit Collector-base voltage VCBO 50 V Collector-emitter voltage VCEO 50 V Emitter-base voltage VEBO 10 V IC 100 mA Symbol Rating Unit Collector-base voltage VCBO -50 V Collector-emitter voltage VCEO -50 V Emitter-base voltage VEBO -7 V IC -100 mA Collector current Maximum Ratings (Ta = 25°C) (Q2) Characteristics Collector current Maximum Ratings (Ta = 25°C) (Q1, Q2 common) Characteristics Collector power dissipation Junction temperature Storage temperature range Symbol PC (Note) Rating Unit 200 mW Tj 150 °C Tstg -55~150 °C Note: Total rating 2 2002-01-30 RN47A5 Electrical Characteristics (Ta = 25°C) (Q1) Characteristics Collector cut-off current Emitter cut-off current Symbol Test Condition Min Typ. Max ICBO VCB = 50 V, IE = 0 ¾ ¾ 100 ICEO VCE = 50 V, IB = 0 ¾ ¾ 500 IEBO VEB = 10 V, IC = 0 0.082 ¾ 0.15 hFE Unit nA mA VCE = 5 V, IC = 10 mA 80 ¾ ¾ VCE (sat) IC = 5 mA, IB = 0.25 mA ¾ 0.1 0.3 V Input voltage (ON) VI (ON) VCE = 0.2 V, IC = 5 mA 1.5 ¾ 5.0 V Input voltage (OFF) VI (OFF) VCE = 5 V, IC = 0.1 mA 1.0 ¾ 1.5 V Transition frequency fT VCE = 10 V, IC = 5 mA ¾ 250 ¾ MHz VCB = 10 V, IE = 0, f = 1 MHz ¾ 3 6 pF kW DC current gain Collector-emitter saturation voltage Collector output capacitance Cob Input resistor R1 ¾ 32.9 47 61.1 Resistor ratio R1/R2 ¾ 0.8 1.0 1.2 Test Condition Min Typ. Max Electrical Characteristics (Ta = 25°C) (Q2) Characteristics Collector cut-off current Emitter cut-off current Symbol ICBO VCB = -50 V, IE = 0 ¾ ¾ -100 ICEO VCE = -50 V, IB = 0 ¾ ¾ -500 IEBO VEB = -7 V, IC = 0 -0.36 ¾ -0.68 hFE Unit nA mA VCE = -5 V, IC = -10 mA 50 ¾ ¾ VCE (sat) IC = -5 mA, IB = -0.25 mA ¾ -0.1 -0.3 V Input voltage (ON) VI (ON) VCE = -0.2 V, IC = -5 mA -0.7 ¾ -2.5 V Input voltage (OFF) VI (OFF) VCE = -5 V, IC = -0.1 mA -0.3 ¾ -1.1 V Transition frequency fT VCE = -10 V, IC = -5 mA ¾ 200 ¾ MHz VCB = -10 V, IE = 0, f = 1 MHz ¾ 3 6 pF kW DC current gain Collector-emitter saturation voltage Collector output capacitance Cob Input resistor R1 ¾ 3.29 4.7 6.11 Resistor ratio R1/R2 ¾ ¾ 0.47 ¾ 3 2002-01-30 RN47A5 RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 4 2002-01-30