SPICE MODELS: B120 B130 B140 B150 B160 B120B B130B B140B B150B B160B B120/B - B160/B 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Features · Guard Ring Die Construction for Transient Protection · · · · Ideally Suited for Automatic Assembly · Dim B Low Power Loss, High Efficiency SMA SMB Min Max Min Max Surge Overload Rating to 30A Peak A 2.29 2.92 3.30 3.94 For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Application B 4.00 4.60 4.06 4.57 C 1.27 1.63 1.96 2.21 D 0.15 0.31 0.15 0.31 E 4.80 5.59 5.00 5.59 G 0.10 0.20 0.10 0.20 H 0.76 1.52 0.76 1.52 J 2.01 2.62 2.00 2.62 A C Lead Free Finish/RoHS Compliant (Note 3) D Mechanical Data J · · Case: SMA/SMB · · Moisture Sensitivity: Level 1 per J-STD-020C · · · · Polarity: Cathode Band or Cathode Notch G E H Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 All Dimensions in mm No Suffix Designates SMA Package “B” Suffix Designates SMB Package Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 e3 Marking Information: See page 3 Ordering Information: See page 3 Approximate Weight: SMA 0.064 grams SMB 0.093 grams Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TT = 130°C Symbol B120/B B130/B B140/B B150/B B160/B Unit VRRM VRWM VR 20 30 40 50 60 V VR(RMS) 14 21 28 35 42 V IO 1.0 A Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load IFSM 30 A Forward Voltage @ IF = 1.0A VFM @ TA = 25°C @ TA = 100°C IRM 0.5 10 Peak Reverse Current at Rated DC Blocking Voltage Typical Total Capacitance (Note 2) Typical Thermal Resistance Junction to Terminal (Note 1) Operating and Storage Temperature Range Notes: 0.50 0.70 V mA CT 110 pF RqJT 20 °C/W Tj, TSTG -65 to +150 °C 1. Thermal Resistance: Junction to terminal, unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pads as heat sink. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 3. RoHS revision 13.2.2003. High Temperature Solder Exemption Applied, see EU Directive Annex Note 7. DS13002 Rev. 13 - 2 1 of 3 www.diodes.com B120/B-B160/B ã Diodes Incorporated IF, INSTANTANEOUS FWD CURRENT (A) 1.0 0.5 0 TA = +75°C TA = +25°C 1.0 TA = -25°C 0.1 25 50 75 100 125 0.2 150 0.4 10 0.8 1.0 1.2 40 1.0 TA = +125ºC TA = +25ºC 0.1 IF Pulse Width = 300 ms 0.01 0 0.2 0.4 0.8 0.6 Single Half Sine-Wave 30 20 10 0 1 1.0 1000 100 10 NUMBER OF CYCLES AT 60 Hz VF, INSTANTANEOUS FWD VOLTAGE (V) Fig. 3 Typ. Forward Characteristics - B150/B thru B160/B Fig. 4 Max Non-Repetitive Peak Fwd Surge Current 10,000 Tj = 25°C f = 1 MHz CT, TOTAL CAPACITANCE (pF) 0.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics - B120/B thru B140/B TT, TERMINAL TEMPERATURE (ºC) Fig. 1 Forward Current Derating Curve IF, INSTANTANEOUS FORWARD CURRENT (A) TA = +125°C IFSM, PEAK FORWARD SURGE CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 10 TA = +125°C 1000 TA = +75°C 100 10 100 TA = +25°C 1 0.1 10 TA = -25°C 0.01 0.1 1 10 VR, REVERSE VOLTAGE (V) Fig. 5 Typical Total Capacitance DS13002 Rev. 13 - 2 100 0 10 20 30 40 50 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 6 Typical Reverse Characteristics, B120/B thru B140/B 2 of 3 www.diodes.com B120/B-B160/B 10,000 1000 TA = +125°C 100 TA = +70°C 10 1 TA = +25°C 0.1 0 10 20 30 40 50 60 70 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 7 Typical Reverse Characteristics, B150/B thru B160/B Ordering Information (Note 4) Notes: Device* Packaging Shipping B1XX-13-F SMA 5000/Tape & Reel B1XXB-13-F SMB 3000/Tape & Reel 4. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. * xx = Device type, e.g. B120-13-F (SMA package); B120B-13-F (SMB package). Marking Information YWW B1X0(B) B1X0 = Product type marking code, ex: B120 (SMA package) B1X0B = Product type marking code, ex: B160B (SMB package) = Manufacturers’ code marking YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52 Note: Device has a cathode band (as shown above) and may also have a cathode notch (as shown on Page 1). IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS13002 Rev. 13 - 2 3 of 3 www.diodes.com B120/B-B160/B