SPICE MODELS: RS1A RS1B RS1D RS1G RS1J RS1K RS1M RS1AB RS1BB RS1DB RS1GB RS1JB RS1KB RS1MB RS1A/B - RS1M/B 1.0A SURFACE MOUNT FAST RECOVERY RECTIFIER Features · · · · · Glass Passivated Die Construction Fast Recovery Time For High Efficiency Surge Overload Rating to 30A Peak B Ideally Suited for Automated Assembly Lead Free Finish/RoHS Compliant (Note 4) Dim A Mechanical Data · · Case: SMA/SMB · · Moisture Sensitivity: Level 1 per J-STD-020C · · · · · Polarity: Cathode Band or Cathode Notch C Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 D J Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 e3 G E H Marking Information: See Page 3 Ordering Information: See Page 3 SMA SMB Min Max Min Max A 2.29 2.92 3.30 3.94 B 4.00 4.60 4.06 4.57 C 1.27 1.63 1.96 2.21 D 0.15 0.31 0.15 0.31 E 4.80 5.59 5.00 5.59 G 0.10 0.20 0.10 0.20 H 0.76 1.52 0.76 1.52 J 2.01 2.30 2.00 2.40 A, B, D, G, J, K, M Suffix Designates SMA Package AB, BB, DB, GB, JB, KB, MB Suffix Designates SMB Package SMA Weight: 0.064 grams (approximate) SMB Weight: 0.093 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 5) RMS Reverse Voltage Symbol RS1 A/AB RS1 B/BB RS1 D/DB RS1 G/GB RS1 J/JB RS1 K/KB RS1 M/MB Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 1.0 A Non-Repetitive Peak Forward Surge Current, 8.3ms single half sine-wave Superimposed on Rated Load IFSM 30 A Forward Voltage Drop VFM 1.3 V IRM 5.0 200 µA Average Rectified Output Current Peak Reverse Current at Rated DC Blocking Voltage (Note 5) @ TT = 120°C @ IF = 1.0A @ TA = 25°C @ TA = 125°C Reverse Recovery Time (Note 3) trr Typical Total Capacitance (Note 2) CT Typical Thermal Resistance, Junction to Terminal (Note 1) Operating and Storage Temperature Range Notes: 1. 2. 3. 4. 5. 150 250 500 ns 15 pF RqJT 20 °C/W Tj, TSTG -65 to +150 °C Valid provided that terminals are kept at ambient temperature. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Reverse recovery test conditions: IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7. Short duration pulse test used to minimize self-heating effect. DS15002 Rev. 11 - 2 1 of 3 www.diodes.com RS1A/B - RS1M/B ã Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 1.2 1.0 0.8 0.6 0.4 0.2 10 1.0 0.1 o Tj = 25 C 0.01 0 25 50 75 100 125 150 0 175 IFSM, PEAK FORWARD SURGE CURRENT (A) TT, TERMINAL TEMPERATURE (° C) Fig. 1 Forward Current Derating Curve 0.4 0.8 1.2 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 30 1000 Single Half-Sine-Wave Tj = 125° C Tj = 150°C 100 20 10 10 Tj = 25°C 1.0 0.1 0 1 10 0 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Forward Surge Current Derating Curve 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics trr +0.5A Device Under Test (-) 0A (+) 50V DC Approx Pulse Generator (Note 2) (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS15002 Rev. 11 - 2 2 of 3 www.diodes.com RS1A/B - RS1M/B Ordering Information (Note 6) Device* Packaging Shipping RS1x-13-F RS1xB-13-F SMA SMB 5000/Tape & Reel 3000/Tape & Reel * x = Device type, e.g. RS1D-13-F (SMA package); RS1JB-13-F (SMB package). Notes: 6. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information YWW RS1X(B) RS1X = Product Type Marking Code, ex: RS1G (SMA package) RS1XB = Product Type Marking Code, ex: RS1GB (SMB package) = Manufacturer’s Code Marking YWW = Date Code Marking Y = Last Digit of Year ex: 6 for 2006 WW = Week code 01 to 52 IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS15002 Rev. 11 - 2 3 of 3 www.diodes.com RS1A/B - RS1M/B