VTF (Standard) Vishay Thin Film Conformal, Single In-Line Resistor Networks (Standard) FEATURES Actual Size • Lead (Pb)-free available Pb-free • Off-the-shelf delivery Available RoHS* THROUGH HOLE NETWORKS • Wide variety of standards VISHAY Thin Film resistor networks are designed to be used in analog circuits in conjunction with operational amplifiers. Engineers can use these circuits to achieve an infinite number of very low noise and high stability circuits for industrial, medical and scientific instrumentation. This family of standard resistor networks will continually be expanded with new and innovative designs, and VISHAY Thin Film stocks most designs in house for off-the-shelf convenience. However, if you can not find the standard network you need, call Applications Engineering at (716) 283-4025, as we may be able to meet your requirements with a semicustom “match” for a quick delivery. For standard networks with tighter specifications, or for custom networks, contact Applications Engineering at the above number. For a quick review of typical applications, request VISHAY’s Guide to Understanding and Using Thin Film Precision Networks. COMPLIANT • Small size (SIP) • Standard designs - no NRE • Low capacitance < 0.1 pF/PIN • Flame resistant (UL94V-0 rating) TYPICAL PERFORMANCE ABS TRACKING 10 2 ABS RATIO 0.1 0.02 TCR TOL Complete Electrical Specifications at the end of schematics. TWO EQUAL RESISTORS SCHEMATIC R1 = R2 ORDERING INFORMATION R1 1 R2 2 R1 = 3 Actual Size 1K: VTF209BX 50K: VTF214BX 2K: VTF210BX 100K: VTF215BX 5K: VTF211BX 200K: VTF216BX 10K: VTF212BX 500K: VTF217BX 20K: VTF213BX 1M: VTF218BX L = Total Length = 0.320" (8.13 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Except PN 218 where Seated Height = 0.342" (8.69 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF209SBX R1 + R2 = 10K, 100K, 1M RATIO DIVIDER 10:1 R1 + R2 ———— = 10 R2 ORDERING INFORMATION R1 1 R1 + R2 = R2 2 3 Actual Size L = Total Length = 0.320" (8.13 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Except PN 281 where Seated Height = 0.362" (9.19 mm) Max. 9K + 1K = 10K: VTF280BX 90K + 10K = 100K: VTF193BX 900K + 100K = 1M: VTF281BX Lead (Pb)-free option add “S” after part number, e.g: VTF280SBX * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 74 For technical questions, contact: [email protected] Document Number: 60038 Revision: 05-Mar-08 VTF (Standard) Conformal, Single In-Line Resistor Networks (Standard) Vishay Thin Film DIVIDER NETWORK 10:1 R1 = 100K, 1M ORDERING INFORMATION R1 ——— = 10 R2 R1 R2 Actual Size 1 2 3 L = Total Length = 0.320" (8.13 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Except PN 283 where Seated Height = 0.362" (9.19 mm) Max. R1 = 100K: VTF282BX R1 =1M: VTF283BX TWO EQUAL RESISTORS - ISOLATED R1 = R2 R1 ORDERING INFORMATION R2 1 2 3 R1 = 4 Actual Size L = Total Length = 0.420" (10.67 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. 1K: 2K: 5K: 10K: 20K: 25K: VTF365BX VTF997BX VTF998BX VTF363BX VTF1104BX VTF999BX 50K: 100K: 200K: 500K: 1M: VTF1000BX VTF348BX VTF1105BX VTF1106BX VTF1103BX Lead (Pb)-free option add “S” after part number, e.g: VTF365SBX R1 + R2 + R3 R3 = 100 R1 + R2 + R3 = 10 R2 + R3 R1 R2 R3 90K 9K 1K 1 2 ORDERING INFORMATION 4 Actual Size 3 L = Total Length = 0.420" (10.67 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF330SBX FOUR EQUAL RESISTORS ONE COMMON R1 = R2 = R3 = R4 = 10K, 100K R1 1 2 R2 3 R3 ORDERING INFORMATION R4 4 R1 + R2 + R3 = 100K: VTF330BX 5 R1 = 10K: VTF366BX 100K: VTF367BX Actual Size L = Total Length = 0.520" (13.21 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF366SBX DIVIDER NETWORK 2:1 ORDERING INFORMATION R1 = 10K R2 R1 R1 =1 R2 10K R1 x R2 R3 = R1 + R2 1 R3 10K 2 5K 3 4 5 VTF1087BX Actual Size L = 0.520 (13.21 mm), H = 0.280 (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF1087SBX Document Number: 60038 Revision: 05-Mar-08 For technical questions, contact: [email protected] www.vishay.com 75 THROUGH HOLE NETWORKS RATIO DIVIDER 10:1 AND 100:1 R1 + R2 + R3 = 100K VTF (Standard) Conformal, Single In-Line Resistor Networks (Standard) Vishay Thin Film R1 = 10K R1 R2 R3 20K 6.667K DIVIDER NETWORK 2:1 ORDERING INFORMATION R2 —— = 2 R1 10K 1 2 3 4 5 Actual Size VTF1088BX R1 x R2 R3 = —————— R1 + R2 L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) Max. R1 = 10K R1 R2 R2 —— = 5 R1 10K 50K Lead (Pb)-free option add “S” after part number, e.g: VTF1088SBX DIVIDER NETWORK 5:1 R3 ORDERING INFORMATION R1 x R2 1 R3 = ——————— R1 + R2 2 8.333K 3 4 5 Actual Size VTF1089BX L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) Max. THROUGH HOLE NETWORKS Lead (Pb)-free option add “S” after part number, e.g: VTF1089SBX R1 = 10K R1 R2 R3 R2 —— = 10 R1 10K 100K 9.09K DIVIDER NETWORK 10:1 ORDERING INFORMATION 2 3 R1 x R2 1 R3 = —————— R1 + R2 NOTE: R2 TC Tracking 3 ppm/°C 4 5 Actual Size VTF1090BX L = 0.520" (13.21 mm), H = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF1090SBX DIVIDER NETWORK 1:1 R1 = 5K, 10K, 100K, 1M R1 = R2 R1 R2 R2 ORDERING INFORMATION R1 R1 = 5K: VTF225BX 10K: VTF286BX 100K: VTF219BX 1M: VTF287BX 1 2 3 4 5 6 Actual Size L = Total Length = 0.620" (15.75 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Except PN 287 Seated Height = 0.362" (9.19 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF225SBX DIVIDER NETWORK 2:1 R1 = 10K, 100K R1 —— = 2 R2 R1 1 R2 2 R2 3 4 5 L = Total Length = 0.620" (15.75 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. www.vishay.com 76 ORDERING INFORMATION R1 R1 = 10K: VTF1009BX 100K: VTF1010BX 6 Actual Size Lead (Pb)-free option add “S” after part number, e.g: VTF1009SBX For technical questions, contact: [email protected] Document Number: 60038 Revision: 05-Mar-08 VTF (Standard) Conformal, Single In-Line Resistor Networks (Standard) DIVIDER NETWORK 5:1 R1 = 10K, 100K R1 —— = 5 R2 R1 1 R2 2 R2 3 4 R1 R2 ORDERING INFORMATION R1 5 R1 = 10K: VTF1007BX 100K: VTF1008BX 6 Actual Size L = Total Length = 0.620" (15.75 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. R1 = 10K Vishay Thin Film Lead (Pb)-free option add “S” after part number, e.g: VTF1007SBX R1 DIVIDER NETWORK 10:1 R2 ORDERING INFORMATION R2 —— = 10 R1 1 2 3 4 6 Actual Size 5 R1 = 10K: VTF220BX L = Total Length = 0.620" (15.75 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF220SBX R1 R1 —— = 10 R2 1 THROUGH HOLE NETWORKS DIVIDER NETWORK 10:1 R1 = 10K, 100K, 1M R2 2 R2 3 4 R1 5 ORDERING INFORMATION R1 = 10K: VTF328BX 100K: VTF284BX 1M: VTF285BX 6 Actual Size L = Total Length = 0.620" (15.75 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Except PN 285 Seated Height = 0.320" (8.13 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF328SBX DIVIDER NETWORK 20:1 R1 = 10K, 50K, 200K, 1M R1 R1 —— = 20 R2 1 R2 2 R2 3 4 ORDERING INFORMATION R1 5 R1 = 10K: VTF1073BX 50K: VTF1074BX 200K: VTF1107BX 1M: VTF1108BX 6 Actual Size L = Total Length = 0.620" (15.75 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF1073SBX R1 = 1M R1 —— = 100 R2 1 R1 R2 R2 DIVIDER NETWORK 100:1 R1 ORDERING INFORMATION 2 3 4 5 6 Actual Size R1 = 1M: VTF1109BX Lead (Pb)-free option add “S” after part number, e.g: VTF1109SBX Document Number: 60038 Revision: 05-Mar-08 For technical questions, contact: [email protected] www.vishay.com 77 VTF (Standard) Conformal, Single In-Line Resistor Networks (Standard) Vishay Thin Film Common Mode Division Ratio 250, 100, 50 R1 = R3 = 1M R2 = 4K, 10K, 20K R4 = 3.984K, 9.901K, 19.608K R5 = 900K, 950K, 975K R6 = 100K, 50K, 25K SIX RESISTOR NETWORK (Designed for Unity Gain/High Common Mode Voltage Rejection Differential Amplifier) ORDERING INFORMATION R5 R6 R1 R2 R4 R1 R3 = Division Ratio = 250: VTF442BX R2 1M 1M 1 2 3 4 5 7 Actual Size 6 100: VTF443BX 50: VTF444BX Lead (Pb)-free option add “S” after part number, e.g: VTF442SBX L = Total Length = 0.720" (18.29 mm) Max. H = Seated Height = 0.360" (9.14 mm) Max. Maximum voltage to pins #3 and #7 is 300 V THROUGH HOLE NETWORKS FOUR EQUAL RESISTORS ISOLATED R1 = 1K, 10K, 25K, 50K, 100K R1 1 R1 2 3 ORDERING INFORMATION R1 4 5 R1 6 7 R1 = 1K: 8 Actual Size L = Total Length = 0.820" (20.83 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. VTF329BX 2K: VTF1001BX 5K: VTF1002BX 10K: VTF158BX 25K: VTF1003BX 50K: VTF1004BX 100K: VTF288BX Lead (Pb)-free option add “S” after part number, e.g: VTF329SBX FOUR EQUAL RESISTORS ISOLATED R1 = 1K, 10K, 100K R1 1 R1 2 3 R1 4 5 6 Absolute Tolerance = 0.1 % Ratio Tolerance = 0.1 % L = Total Length = 0.820" (20.83 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. www.vishay.com 78 ORDERING INFORMATION R1 7 8 R1 = 1K: VTF1005BX 10K: VTF1006BX 100K: VTF1137BX Actual Size Lead (Pb)-free option add “S” after part number, e.g: VTF1005SBX For technical questions, contact: [email protected] Document Number: 60038 Revision: 05-Mar-08 VTF (Standard) Conformal, Single In-Line Resistor Networks (Standard) Vishay Thin Film EIGHT EQUAL RESISTORS ONE COMMON ORDERING INFORMATION Actual Size R1 = R2 = R3 = R4 = R5 = R6 = R7 = R8 = 10K, 100K R1 1 R2 2 R3 3 R4 4 R5 5 R6 6 R7 7 R1 = 10K: VTF368BX 100K: VTF369BX R8 8 9 L = Total Length = 0.920" (23.37 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF368SBX EIGHT RESISTOR NETWORK (Designed for Instrument Amplifier with Shield Driver) ORDERING INFORMATION Actual Size 10K 1K 9K 1K 1K 9K 1K 10K VTF272BX REF. 1 2 3 4 5 6 7 8 9 Lead (Pb)-free option add “S” after part number, e.g: VTF272SBX R = 10K, 1K EIGHT BIT R/2R LADDER NETWORK ORDERING INFORMATION Actual Size 2R 1 R R R R R R R 2R 2R 2R 2R 2R 2R 2R 2 3 4 5 6 7 8 (± 1/2 LSB) R = 1K: VTF1072BX R = 10K: VTF267BX 2R 9 10 L = Total Length =1.020" (25.91 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. Lead (Pb)-free option add “S” after part number, e.g: VTF1072SBX R1 = 1K RESISTANCE DOUBLER ORDERING INFORMATION Actual Size 1K 2K 4K 8K 16K 32K 64K 128K 256K R1 R2 R3 R4 R5 R6 R7 R8 R9 VTF1011BX Lead (Pb)-free option add “S” after part number, e.g: VTF1011SBX 1 2 3 4 Document Number: 60038 Revision: 05-Mar-08 5 6 7 8 9 10 Absolute Tolerance = ± 0.1 % Ratio Tolerance = ± 0.1 % TCR Tracking = ± 3 ppm/°C L = Total Length = 1.02" (25.91 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. For technical questions, contact: [email protected] www.vishay.com 79 THROUGH HOLE NETWORKS L = Total Length = 0.920" (23.37 mm) Max. H = Seated Height = 0.280" (7.11 mm) Max. VTF (Standard) Vishay Thin Film Conformal, Single In-Line Resistor Networks (Standard) STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS Material CONDITIONS Passivated nichrome Tracking ± 2 ppm/°C 0 °C to + 70 °C Absolute ± 10 ppm/°C 0 °C to + 70 °C Ratio ± 0.02 % + 25 °C Absolute ± 0.1 % + 25 °C ΔR Ratio ≤ 0.01 % 2000 h at + 70 °C TCR*: Tolerance: Stability: Voltage Coefficient ± 0.01 ppm/V Working Voltage 100 V Operating Temperature Range 0 °C to + 70 °C Storage Temperature Range - 55 °C to + 125 °C Noise - 35 dB Thermal EMF < 0.1 µV/°C Absolute 100 ppm 1 year at + 25 °C Ratio 20 ppm 1 year at + 25 °C THROUGH HOLE NETWORKS Shelf Life Stability: DIMENSIONS AND IMPRINTING in inches and millimeters Part Number E Date Code DIMENSION INCHES MM A 0.125 (min.) 3.17 B 0.010 (min.) 0.25 C 0.100 2.54 typ. D 0.020 typ. 0.51 E 0.100 max. 2.54 F 0.010 typ. 0.25 Pin #1 H VISHAY logo B A D C F L NOTE: “L” and “H” (length and height) dimensions for each model are found alongside the schematic drawing. MECHANICAL SPECIFICATIONS Resistive Material Passivated nichrome Substrate Material Alumina Body Terminals Plating Marking Resistance to Solvents Epoxy coated Copper Sn 60 Per MIL-PRF-83401 Lead (Pb)-free Option 96.5 % Sn, 3.0 % Ag, 0.5 % Cu Lead (Pb)-free Finish Hot solder dip www.vishay.com 80 For technical questions, contact: [email protected] Document Number: 60038 Revision: 05-Mar-08 VTF (Standard) Conformal, Single In-Line Resistor Networks (Standard) Vishay Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VTF211BX (preferred part number format) V T F V T F 2 1 1 0 1 0 4 S B X B X GLOBAL MODEL PART NUMBER (3 or 4 digits) LEAD (Pb)-FREE (0 or 1 digits) PACKAGING VTF xxx or xxxx S = Lead (Pb)-free (e1) None = Tin lead BX = Conductive foam box Example: 214 1004 Historical Part Number example: VTF 211 (will continue to be accepted) VTF 211 MODEL PART NUMBER THROUGH HOLE NETWORKS Document Number: 60038 Revision: 05-Mar-08 For technical questions, contact: [email protected] www.vishay.com 81 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1