Vishay Thin Film Molded, 25 or 50 Mil Pitch, Dual-In-Line Resistor Networks FEATURES Actual Size Vishay Thin Film resistor networks are designed to be used in either analog or digital circuits. The use of thin film resistive elements within the network allows you to achieve an infinite number of very low noise and high stability circuits for industrial, medical and scientific instrumentation. Vishay Thin Film resistor networks are packaged in molded plastic packages with sizes that are recognized throughout the world. The rugged packaging offers superior environmental protection and consistent dimensions for ease of placement with automatic SMT equipment. Vishay Thin Film stocks many designs and values for off-the-shelf convenience. With Vishay Thin Film you can depend on quality products delivered on time with service backing the product. SCHEMATICS 01 SCHEMATIC TYPICAL PERFORMANCE ABS TCR TOL TRACKING 100 NA ABS RATIO 5, 2, 1 NA RESISTORS WITH ONE PIN COMMON The 01 circuit provides nominally equal resistors connected between a common pin and a discrete PC board pin. Commonly used in the following applications: Resistance Range: 10 Ω to 47 kΩ • MOS/ROM Pull-up/Pull-down • Open Collector Pull-up • "Wired OR" Pull-up • Power Driven Pull-up • TTL Input Pull-down • Digital Pulse Squaring • TTL Unused Gate Pull-up • High Speed Parallels Pull-up Broad selection of standard values available Lead #1 03 SCHEMATICS ISOLATED RESISTORS The 03 circuit provides nominally equal resistors isolated from all others and wired directly across. Commonly used in the following applications: Resistance Range: 10 Ω to 47 kΩ • "Wired OR" Pull-up • Power Driven Pull-up • Powergate Pull-up • Line Termination Lead #1 R1 DUAL-LINE TERMINATOR; PULSE SQUARING R1 R2 R1 R • Long-line Impedance Balancing • LED Current Limiting • ECL Output Pull-down • TTL Input Pull-down Broad selection of standard values available 05 SCHEMATICS R1 R2 R1 R2 R1 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 The 05 circuit contains pairs of resistors connected between ground and a common line. The junctions of these resistor pairs are connected to the input leads. The 05 circuits are designed for dual-line termination and pulse squaring. Standard values are: R1 R2 VSSR1605 - R1 = 220 Ω, R2 = 330 Ω R1 = 330 Ω, R2 = 470 Ω VSSR2005 - R1 = 220 Ω, R2 = 330 Ω 1 Lead #1 47 SCHEMATICS R1 = 220 Ω, R2 = 1.8 kΩ R1 = 1.5 kΩ, R2 = 3.3 kΩ DIFFERENTIAL TERMINATOR VCC R1 R2 R3 Lead #1 • Lead (Pb)-free standard • Reduces total assembly costs • Compatible with automatic surface mounting RoHS equipment COMPLIANT • UL 94 V-0 flame resistant • Thin Film Tantalum Nitride on silicon • Choice of package sizes: VTSR (TSSOP) JEDEC MC-153, VSSR (SSOP or QSOP) JEDEC MS-137, VSOR (SOIC narrow) JEDEC MS-012 • Moisture sensitivity level 1 (per IPC/JEDEC STD-20C) • Isolated/Bussed/dDual terminator/Differential terminator circuits The 47 schematic consists of series resistor sections connected between Vcc and Ground. Each contains 3 resistors of 2 different resistance values. Standard values are: VSSR20 and VTSR20 VSSR16 and VTSR16 - R1 = 270 Ω, R2 = 120 Ω R1 = 330 Ω, R2 = 220 Ω R1 = 330 Ω, R2 = 150 Ω GND Document Number: 60003 Revision: 14-Nov-08 For technical questions, contact: [email protected] www.vishay.com 21 SURFACE MOUNT NETWORKS VTSR, VSSR, VSOR SURFACE MOUNT NETWORKS VTSR, VSSR, VSOR Vishay Thin Film Molded, 25 or 50 Mil Pitch, Dual-In-Line Resistor Networks STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS Electrical Specifications CONDITIONS 16, 20, 24 10 Ω to 47 kΩ Resistance Range TCR: Tracking NA Absolute ± 100 ppm/°C Ratio Tolerance: - 55 °C to + 125 °C NA ± 5 % standard (± 2 % available)/per E - 24 table ± 1 % standard (check factory)/per E - 96 table Absolute Power Rating: Per E - 24 table Per E - 24 table per E - 96 table Resistor 100 mW (max.) At + 70 °C Package 16 = 1.0 W 20 = 1.2 W 24 = 1.4 W 0 °C to + 70 °C Voltage Coefficient 5 ppm/V typ. Working Voltage 50 VDC Operating Temperature Range - 55 °C to + 125 °C Storage Temperature Range - 55 °C to + 150 °C Noise < - 35 dB DIMENSIONS AND IMPRINTING in inches and millimeters B C Part Marking-Model, Pin Count (Optional), Schematic E xxxx Resistance Value Code H F Date Code G Pin #1 J A W D A MODEL 16 PIN 20 PIN 24 PIN B (Ref.) C (Ref.) D VTSR-xxxx 0.206 ± 0.003 0.256 ± 0.003 0.306 ± 0.003 0.0256 0.0087 0.004 0.22 0.10 0.61 VSSR-xxxx 0.193 ± 0.004 0.341 ± 0.003 0.341 ± 0.003 0.025 5.23 ± 0.08 6.50 ± 0.08 F G J (Ref.) H W 0.024 0.173 ± 0.003 0.015 × 45° 0.252 ± 0.005 0.005 0.043 ± 0.005 0.65 (millimeters) 7.77 ± 0.08 E (Typ.) 4.39 ± 0.08 0.38 6.40 ± 0.13 0.13 1.09 ± 0.13 0.010 0.006 0.025 0.154 ± 0.003 0.015 × 45° 0.236 ± 0.008 0.010 0.064 ± 0.005 (millimeters) 4.90 ± 0.010 8.66 ± 0.08 8.66 ± 0.08 0.64 0.25 0.15 0.64 VSOR-xxxx 0.390 ± 0.010 NA NA 0.050 0.016 0.008 0.030 0.152 ± 0.003 0.015 × 45° 0.236 ± 0.005 0.008 0.064 ± 0.005 (millimeters) NA NA 1.27 0.41 0.20 0.76 9.91 ± 0.25 3.91 ± 0.08 3.86 ± 0.08 0.38 5.99 ± 0.20 0.38 5.99 ± 0.13 0.25 0.20 1.63 ± 0.13 1.63 ± 0.13 MARKING MODEL VXXX VSOR VSSR VTSR www.vishay.com 22 PIN COUNT (optional) SCHEMATIC XX 16 20 24 RESISTANCE RESISTANCE DATE CODE XX XXXX XXX XXXX 01, 03, 05 or 47 1 % RESISTANCE e.g.: 43R2 4 digits are used to express ohmic values only less than 100 Ω. R is used to designate the decimal position OR 1 %, 2 %, 5 % RESISTANCE e.g.: 103 = 10K The first 2 digits are significant figures, the last digit specifies the number of zeros to follow. For technical questions, contact: [email protected] Document Number: 60003 Revision: 14-Nov-08 Molded, 25 or 50 Mil Pitch, Dual-In-Line Resistor Networks Vishay Thin Film MECHANICAL SPECIFICATIONS Resistive Element Tantalum nitride Substrate Material Silicon Body Molded epoxy Terminals Copper alloy Plating 100 % Sn Matte Lead Coplanarity 0.0005" Marking Resistance to Solvents Permanency testing per MIL-STD-202, method 215 DERATING CURVE PACKAGING INFORMATION LEADS TAPE AND REEL TUBES 16 2500 94 20 2500 74 24 2500 62 16 2500 98 20 2500 55 24 2500 55 16 2500 48 VTSR (TSSOP) VSSR (QSOP) VSOR (SOIC) 100 Percent of Rated Power MODEL 80 60 40 20 0 0 70 125 150 Ambient Temperature °C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: VTSR1601103JTF (preferred part number format) V T S R 1 6 0 1 V S O R 1 6 0 5 1 3 3 0 1 RESISTANCE (3, 4 or 6 digits) 3 4 7 1 TOLERANCE GLOBAL MODEL PIN COUNT SCHEMATIC VTSR VSSR VSOR Lead (Pb)-free (e3) date code > 2705 20 (not VSOR) 24 (not VSOR) 01 (bussed) 03 (isolated) XXX: ≥ 100R and all 1 %, 2 % and 5 % First 2 digits are significant figures. Last digit specifies number of zeros to follow. XXXX: < 100R 1 % First 3 digits are significant figures. Last digit specifies number of zeros to follow. F = 1.0 % G = 2.0 % J = 5.0 % 16 (not VTSR) 20 (not VSOR) 05 (terminator) 47 (terminator) xxx xxx First 2 digits are significant figures. Last digit specifies number of zeros. G = 2.0 % J = 5.0 % J T F G T F PACKAGING Tape and reel TF = Full reel 2500 UF = Tubed Historical Part Number example: VSSR2001102GT/R (will continue to be accepted) VSSR 20 01 102 G T/R MODEL PIN COUNT SCHEMATIC RESISTANCE TOLERANCE PACKAGING Document Number: 60003 Revision: 14-Nov-08 For technical questions, contact: [email protected] www.vishay.com 23 SURFACE MOUNT NETWORKS VTSR, VSSR, VSOR Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1