A Product Line of Diodes Incorporated FMMT493 100V NPN MEDIUM POWER TRANSISTOR IN SOT23 Features Mechanical Data BVCEO > 100V IC = 1A High Continuous Collector Current Case material: Molded Plastic. “Green” Molding Compound. ICM = 2A Peak Pulse Current UL Flammability Rating 94V-0 500mW Power Dissipation hFE Characterised Up to 2A for High Current Gain Hold Up Moisture Sensitivity: Level 1 per J-STD-020 Complementary PNP Type: FMMT593 Terminals: Finish – Matte Tin Plated Leads, Solderable per MILSTD-202, Method 208 e3 Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2) Weight: 0.008 grams (Approximate) Halogen and Antimony Free. “Green” Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability PPAP capable (Note 4) SOT23 Case: SOT23 C E C B B E Top View Device Symbol Top View Pin-Out Ordering Information (Notes 4 & 5) Part Number FMMT493TA FMMT493QTA FMMT493TC Notes: Compliance AEC-Q101 Automotive AEC-Q101 Marking 493 493 493 Reel size (inches) 7 7 13 Tape width (mm) 8 8 8 Quantity per reel 3,000 3,000 10,000 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally the same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/. 5. For packaging details, go to our website at http://www.diodes.com/products/packages.html. Marking Information 493 FMMT493 Document number: DS33093 Rev. 4 - 2 493 = Product Type Marking Code 1 of 7 www.diodes.com April 2013 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT493 Maximum Ratings (@TA = +25°C, unless otherwise specified.) Symbol Value Unit Collector-Base Voltage Characteristic VCBO 120 V Collector-Emitter Voltage VCEO 100 V Emitter-Base Voltage VEBO 7 V Continuous Collector Current Peak Pulse Current Base Current IC 1 A ICM 2 A IB 200 mA Symbol Value Unit PD 500 mW RθJA 250 °C/W RθJL 197 °C/W TJ, TSTG -55 to +150 °C Thermal Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Power Dissipation (Note 6) Thermal Resistance, Junction to Ambient (Note 6) Thermal Resistance, Junction to Lead (Note 7) Operating and Storage Temperature Range ESD Ratings (Note 8) Characteristic Electrostatic Discharge - Human Body Model Electrostatic Discharge - Machine Model Notes: Symbol ESD HBM ESD MM Value 4,000 ≥ 400 Unit V V JEDEC Class 3A C 6. For a device mounted on 15mm X 15mm 1oz weight copper that is on a single-sided FR4 PCB; device is measured under still air conditions whilst operating in a steady-state. 7. Thermal resistance from junction to solder-point (at the end of the collector lead). 8. Refer to JEDEC specification JESD22-A114 and JESD22-A115. FMMT493 Document number: DS33093 Rev. 4 - 2 2 of 7 www.diodes.com April 2013 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT493 Thermal Characteristics and Derating Information 0.6 VCE(sat) Max Power Dissipation (W) -IC Collector Current (A) 1 Limit 100m DC 1s 100ms 10m 10ms 1ms 15 x 15mm FR4 1oz Copper 1m 1 100µs 10 100 -VCE Collector-Emitter Voltage (V) 15 x 15mm FR4 1oz Copper 0.5 0.4 0.3 0.2 0.1 0.0 0 20 240 15 x 15mm FR4 1oz Copper 200 160 D=0.5 120 80 D=0.2 Single Pulse 40 0 100µ D=0.05 D=0.1 1m 10m 100m 1 Pulse Width (s) 10 100 1k Transient Thermal Impedance FMMT493 Document number: DS33093 Rev. 4 - 2 60 80 100 120 140 160 Temperature (°C) Derating Curve Max Power Dissipation (W) Thermal Resistance (°C/W) Safe Operating Area 40 3 of 7 www.diodes.com 15 x 15mm FR4 1oz Copper 100 10 1 0.1 100µ 1m 10m 100m 1 10 Pulse Width (s) 100 1k Pulse Power Dissipation April 2013 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT493 Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Symbol Min Typ Max Unit Collector-Base Breakdown Voltage Characteristic BVCBO 120 — — V Test Condition Collector-Emitter Breakdown Voltage (Note 9) BVCEO 100 — — V IC = 1mA Emitter-Base Breakdown Voltage BVEBO 7 — — V IE = 100µA Collector Cutoff Current ICBO — — 100 nA VCB = 100V Emitter Cutoff Current IEBO — — 50 nA VEB = 5.6V Collector Emitter Cutoff Current ICES — — 100 nA VCE = 100V IC = 100µA hFE 100 100 60 20 — — — — — 300 — — — IC = 1mA, VCE = 10V IC = 250mA, VCE = 10V IC = 500mA, VCE = 10V IC = 1A, VCE = 10V VCE(sat) — — 300 600 mV mV IC = 500mA, IB = 50mA IC = 1A, IB = 100mA Base-Emitter Turn-On Voltage(Note 9) VBE(on) — — 1.0 V IC = 1A, VCE = 10V Base-Emitter Saturation Voltage(Note 9) VBE(sat) — — 1.15 V IC = 1A, IB = 100mA Output Capacitance Cobo — — 10 pF VCB = 10V, f = 1MHz Transition Frequency fT 150 — — MHz Static Forward Current Transfer Ratio (Note 9) Collector-Emitter Saturation Voltage (Note 9) Note: VCE = 10V, IC = 50mA, f = 100MHz 9. Measured under pulsed conditions. Pulse width ≤ 300µs. Duty cycle ≤ 2%. FMMT493 Document number: DS33093 Rev. 4 - 2 4 of 7 www.diodes.com April 2013 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT493 Typical Electrical Characteristics (@TA = +25°C, unless otherwise specified.) FMMT493 Document number: DS33093 Rev. 4 - 2 5 of 7 www.diodes.com April 2013 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT493 Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. A SOT23 Dim Min Max Typ A 0.37 0.51 0.40 B 1.20 1.40 1.30 C 2.30 2.50 2.40 D 0.89 1.03 0.915 F 0.45 0.60 0.535 G 1.78 2.05 1.83 H 2.80 3.00 2.90 J 0.013 0.10 0.05 K 0.903 1.10 1.00 K1 0.400 L 0.45 0.61 0.55 M 0.085 0.18 0.11 0° 8° All Dimensions in mm B C H K J M K1 F D L G Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. Y Z C X FMMT493 Document number: DS33093 Rev. 4 - 2 Dimensions Value (in mm) Z 2.9 X 0.8 Y 0.9 2.0 C 1.35 E E 6 of 7 www.diodes.com April 2013 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT493 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2013, Diodes Incorporated www.diodes.com FMMT493 Document number: DS33093 Rev. 4 - 2 7 of 7 www.diodes.com April 2013 © Diodes Incorporated