SF30AG - SF30JG 3.0A SUPER-FAST GLASS PASSIVATED RECTIFIER Features · · · · · Glass Passivated Die Construction · Lead Free Finish, RoHS Compliant (Note 4) Diffused Junction Super-Fast Switching for High Efficiency B A High Current Capability and Low Forward Voltage Drop A Surge Overload Rating to 125A Peak Low Reverse Leakage Current C D Mechanical Data · · Case: DO-201AD · · Moisture Sensitivity: Level 1 per J-STD-020C · · · · · Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 DO-201AD Terminals: Finish - Bright Tin. Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Mounting Position: Any Ordering Information: See Last Page Dim Min A 25.40 Max ¾ B 7.20 9.50 C 1.20 1.30 D 4.80 5.30 All Dimensions in mm Marking: Type Number Weight: 1.12 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA = 55°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage @ IF = 3.0A @ TA = 25°C @ TA = 100°C Reverse Recovery Time (Note 3) Typical Junction Capacitance (Note 2) Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: 1. 2. 3. 4. Symbol SF30 AG SF30 BG SF30 CG SF30 DG SF30 FG SF30 GG SF30 HG SF30 JG Unit VRRM VRWM VR 50 100 150 200 300 400 500 600 V VR(RMS) 35 70 100 140 210 280 350 420 V IO 3.0 A IFSM 125 A VFM 0.95 1.3 IRM trr Cj 1.5 5.0 100 35 V mA 40 50 75 50 ns pF RqJA 32 K/W Tj, TSTG -65 to +150 °C Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 5. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS24014 Rev. 4 - 2 1 of 3 www.diodes.com SF30AG - SF30JG ã Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FWD RECTIFIED CURRENT (A) 3.0 2.4 1.8 1.2 0.6 Single phase half-wave 60Hz resistive or inductive load 0 25 50 75 100 125 150 175 200 10 SF30AG - AF30DG SF30FG - AF30GG 1.0 SF30HG - AF30JG 0.1 0.01 0.6 1.0 1.2 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 100 150 SF30AGSF30GG SF30HGSF30JG Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) TA, AMBIENT TEMPERATURE (° C) Fig. 1 Forward Current Derating Curve 0.8 100 50 10 Tj = 25° C f = 1.0MHz 1 0 1 10 1 100 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS24014 Rev. 4 - 2 2 of 3 www.diodes.com SF30AG - SF30JG Ordering Information Notes: (Note 5) Device Packaging SF30AG-B DO-201AD 500/Bulk SF30AG-T DO-201AD 1.2K/Tape & Reel, 13-inch SF30BG-B DO-201AD 500/Bulk SF30BG-T DO-201AD 1.2K/Tape & Reel, 13-inch SF30CG-B DO-201AD 500/Bulk SF30CG-T DO-201AD 1.2K/Tape & Reel, 13-inch SF30DG-B DO-201AD 500/Bulk SF30DG-T DO-201AD 1.2K/Tape & Reel, 13-inch SF30FG-B DO-201AD 500/Bulk SF30FG-T DO-201AD 1.2K/Tape & Reel, 13-inch SF30GG-B DO-201AD 500/Bulk SF30GG-T DO-201AD 1.2K/Tape & Reel, 13-inch SF30HG-B DO-201AD 500/Bulk SF30HG-T DO-201AD 1.2K/Tape & Reel, 13-inch SF30JG-B DO-201AD 500/Bulk Shipping 5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. DS24014 Rev. 4 - 2 3 of 3 www.diodes.com SF30AG - SF30JG