PR6001 - PR6005 6.0A FAST RECOVERY RECTIFIER SPICE MODEL: PR6001 Features · · · · · · Diffused Junction Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop A Low Reverse Leakage Current Lead Free Finish, RoHS Compliant (Note 4) C Mechanical Data · · A B Surge Overload Rating to 300A Peak D Case: R-6 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 · · Moisture Sensitivity: Level 1 per J-STD-020C · · · · Polarity: Cathode Band Ordering Information: See Last Page R-6 Terminals: Finish - Bright Tin. Plated Leads Solderable per MIL-STD-202, Method 208 Dim Min A 25.40 ¾ B 8.60 9.10 C 1.20 1.30 D 8.60 9.10 Marking: Type Number Max All Dimensions in mm Weight: 2.1 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA = 60°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage Symbol PR 6001 PR 6002 PR 6003 PR 6004 PR 6005 Unit VRRM VRWM VR 50 100 200 400 600 V VR(RMS) 35 70 140 280 420 V IO 6.0 A IFSM 300 A @ IF = 6.0A VFM 1.2 V @ TA = 25°C @ TA = 125°C IRM 10 150 mA Reverse Recovery Time (Note 3) trr 150 250 ns Typical Junction Capacitance (Note 2) Cj 140 70 pF Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: 1. 2. 3. 4. RqJA 32 K/W Tj, TSTG -65 to +150 °C Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. Measured at 1.0MHz and applied reverse voltage of 4.0 V DC. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25 A. See figure 5. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS26007 Rev. 3 - 2 1 of 3 www.diodes.com PR6001 - PR6005 ã Diodes Incorporated IFsm, PEAK FORWARD SURGE CURRENT (A) I(AV), AVERAGE FORWARD CURRENT 8 6 4 2 0 0 25 50 75 100 125 150 600 8.3ms Single Half Sine-Wave JEDEC Method 500 400 300 200 100 0 175 1 100 NUMBER OF CYCLES AT 60Hz Fig. 2 Max Non-Repetitive Peak Surge Current 1000 1000 100 Cj, CAPACITANCE (pF) IF, INSTANTANEOUS FORWARD CURRENT (A) TA, AMBIENT TEMPERATURE (° C) Fig. 1, Typical Forward Current Derating Curve 10 10 1 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 100 PR6001 - PR6004 PR6005 10 Tj = 25° C f = 1.0MHz 1.0 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 3, Typical Instantaneous Forward Characteristics 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS26007 Rev. 3 - 2 2 of 3 www.diodes.com PR6001 - PR6005 Ordering Information Notes: (Note 5) Device Packaging Shipping PR6001-T R-6 500/Tape & Reel, 13-inch PR6002-T R-6 500/Tape & Reel, 13-inch PR6003-T R-6 500/Tape & Reel, 13-inch PR6004-T R-6 500/Tape & Reel, 13-inch PR6005-T R-6 500/Tape & Reel, 13-inch 5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. DS26007 Rev. 3 - 2 3 of 3 www.diodes.com PR6001 - PR6005