BAT81S, BAT82S, BAT83S Vishay Semiconductors Small Signal Schottky Diodes Features • Integrated protection ring against static discharge • Low capacitance • Low leakage current • Low forward voltage drop • Very low switching time • AEC-Q101 qualified • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC • Halogen-free according to IEC 61249-2-21 definition 94 9367 Applications Mechanical Data • General purpose and switching Schottky barrier diode • HF-Detector • Protection circuit • Diode for low currents with a low supply voltage • Small battery charger • Power supplies • DC/DC converter for notebooks Case: DO-35 Weight: approx. 125 mg Cathode band color: black Packaging codes/options: TR/10 k per 13" reel (52 mm tape), 50 k/box TAP/10 k per Ammopack (52 mm tape), 50 k/box Parts Table Part Type differentiation Ordering code Type Marking Remarks BAT81S VR = 40 V BAT81S-TR or BAT81S-TAP BAT81S Tape and Reel/Ammopack BAT82S VR = 50 V BAT82S-TR or BAT82S-TAP BAT82S Tape and Reel/Ammopack BAT83S VR = 60 V BAT83S-TR or BAT83S-TAP BAT83S Tape and Reel/Ammopack Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Test condition Reverse voltage Repetitive peak forward current Document Number 85512 Rev. 1.8, 23-Jul-10 Symbol Value Unit BAT81S VR 40 V BAT82S VR 50 V BAT83S VR 60 V IF 30 mA tp ≤ 10 ms IFSM 500 mA tp ≤ 1 s IFRM 150 mA Forward continuous current Peak forward surge current Part For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 BAT81S, BAT82S, BAT83S Vishay Semiconductors Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Symbol Value Unit Thermal resistance junction to ambient air l = 4 mm, TL = constant RthJA 320 K/W Tj 125 °C Tstg - 65 to + 150 °C Junction temperature Storage temperature range Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Symbol IF = 0.1 mA VF Min. Typ. Max. Unit 330 mV IF = 1 mA VF 410 mV IF = 15 mA VF 1000 mV VR = VRmax IR 200 nA VR = 1 V, f = 1 MHz CD 1.6 pF Forward voltage Reverse current Diode capacitance Test condition Typical Characteristics Tamb = 25 °C, unless otherwise specified PR - Reverse Power Dissipation (mW) 14 1000 VR = 60 V I F - Forward Current (mA) 12 RthJA = 540 K/W 10 8 6 Limit at PPRR - Limit at100 100%%VRVR 4 PR - Limit at 80 % VR 100 Tj = 125 °C 10 Tj = 25 °C 1 0.1 2 0.01 0 25 50 75 100 125 Tj - Junction Temperature (°C) 15794 0 150 1.5 2.0 Figure 3. Forward Current vs. Forward Voltage 1000 2.0 CD - Diode Capacitance (pF) V R = V RRM I R - Reverse Current (µA) 1 V F - Forward Voltage (V) 15796 Figure 1. Max. Reverse Power Dissipation vs. Junction Temperature 0.5 100 10 1 f = 1 MHz 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.1 25 15795 0 50 75 100 125 Tj - Junction Temperature (°C) Figure 2. Reverse Current vs. Junction Temperature www.vishay.com 2 0.1 150 15797 1 10 100 VR - Reverse Voltage (V) Figure 4. Diode Capacitance vs. Reverse Voltage For technical questions within your region, please contact one of the following: Document Number 85512 [email protected], [email protected], [email protected] Rev. 1.8, 23-Jul-10 BAT81S, BAT82S, BAT83S Vishay Semiconductors Package Dimensions in millimeters (inches): DO-35 3.9 (0.154) max. 26 (1.024) min. 1.5 (0.059) 26 (1.024) min. 1.7 (0.067) 0.55. (0.022) max Cathode identification Rev. 6 - Date: 29. January 2007 Document no.: 6.560-5004.02-4 94 9366 Document Number 85512 Rev. 1.8, 23-Jul-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000