LL41 Vishay Semiconductors Small Signal Schottky Diode Features • For general purpose applications • This diode features low turn-on voltage and high breakdown voltage • This device is protected by a PN junction guard ring against excessive voltage, such as electrostatic discharges • This diode is also available in the DO-35 case with type designation BAT41 • AEC-Q101 qualified • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC 17205 Mechanical Data Case: MiniMELF SOD-80 Weight: approx. 31 mg Cathode Band Color: black Packaging Codes/Options: GS18/10 k per 13" reel (8 mm tape), 10 k/box GS08/2.5 k per 7" reel (8 mm tape), 12.5 k/box Parts Table Part LL41 Ordering code Type Marking Remarks LL41-GS18 or LL41-GS08 - Tape and Reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Test condition Repetitive peak reverse voltage Surge forward current Power dissipation 1) Value Unit VRRM 100 V 1) mA IFRM 3501) mA tp = 10 ms IFSM 750 1) mA Tamb = 65 °C Ptot 2001) mW IF Forward continuous current Repetitive peak forward current Symbol tp < 1 s, δ < 0.5 100 Valid provided that electrodes are kept at ambient temperature Document Number 85671 Rev. 1.6, 05-Aug-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 LL41 Vishay Semiconductors Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Symbol Value Unit RthJA 3001) K/W Thermal resistance junction to ambient air Tj 125 °C Ambient operating temperature range Tamb - 65 to + 125 °C Storage temperature range Tstg - 65 to + 150 °C Junction temperature 1) Valid provided that electrodes are kept at ambient temperature Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Reverse breakdown voltage2) 2) Leakage current Forward voltage2) Diode capacitance 2) Test condition Symbol Min Typ. IR = 100 µA V(BR) 100 110 Max Unit V VR = 50 V, Tj = 25 °C IR 100 nA VR = 50 V, Tj = 100 °C IR 20 µA IF = 1 mA VF IF = 200 mA VF VR = 1 V, f = 1 MHz CD 400 450 mV 1000 mV 2 pF Pulse test, tp = 300 µs Typical Characteristics Tamb = 25 °C, unless otherwise specified 100000 IR - Reverse Leakage Current (nA) Ptot- Power Dissipation (mW) 250 200 150 100 50 Tj = 125 °C 10000 20225 50 100 Tamb - Ambient Temperature (°C) www.vishay.com 2 50 °C 100 25 °C 10 1 150 Figure 1. Admissible Power Dissipation vs. Ambient Temperature 75 °C 1000 0 0 100 °C 20226 0 10 20 30 40 50 60 70 80 90 100 VR - Reverse Voltage (V) Figure 2. Typical Reverse Characteristics For technical questions within your region, please contact one of the following: Document Number 85671 [email protected], [email protected], [email protected] Rev. 1.6, 05-Aug-10 LL41 Vishay Semiconductors 1000 5.0 CD - Diode Capacitance (pF) I F - Forward Current (mA) 4.5 100 T j = 125 ° C 10 1 - 40 °C 0.1 25 °C 0.01 0 18641 200 400 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 600 800 1000 0 1200 VF - Forward Voltage (mV) 5 Figure 3. Typical Forward Characteristics 10 15 20 25 30 35 40 VR - Reverse Voltage (V) 20227 Figure 4. Typical Capacitance vs. Reverse Voltage Package Dimensions in millimeters (inches): MiniMELF SOD-80 1.6 (0.063) 1.4 (0.055) Cathode indification * 0.47 (0.019) max. 3.7 (0.146) 3.3 (0.130) * The gap between plug and glass can be either on cathode or anode side Foot print recommendation: 1.25 (0.49) min. 2 (0.079) min. 2.5 (0.098) max. 5 (0.197) ref. Document no.:6.560-5005.01-4 Rev. 8 - Date: 07.June.2006 96 12070 Document Number 85671 Rev. 1.6, 05-Aug-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000