SPICE MODELS: DF005S DF01S DF02S DF04S DF06S DF08S DF10S DF005S - DF10S 1.0A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Features · · · · · · Glass Passivated Die Construction Low Forward Voltage Drop, High Current Capability Surge Overload Rating to 50A Peak DF-S Designed for Surface Mount Application UL Listed Under Recognized Component Index, File Number E94661 L G Lead Free Finish, RoHS Compliant (Date Code 0532+) (Note 3) A B D E Mechanical Data · · Case: DF-S · · Moisture Sensitivity: Level 1 per J-STD-020C · · · Polarity: As marked on Case H Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 C J K Terminals: Finish - Tin. Solderable per MIL-STD-202, Method 208 e3 Dim Min Max A 7.40 7.90 B 6.20 6.50 C 0.22 0.30 D 0.076 0.33 E — 10.40 G 1.02 1.53 H 8.13 8.51 J 2.40 2.60 K 5.00 5.20 L 1.00 1.20 All Dimensions in mm Marking: Type Number, See Page 3 Weight: 0.38 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Forward Rectified Current @ TA = 40°C Symbol DF 005S DF 01S DF 02S DF 04S DF 06S DF 08S DF 10S Unit VRMM VRWM VR 50 100 200 400 600 800 1000 V VRMS 35 70 140 280 420 560 700 V IO 1.0 A Non-Repetitive Peak Forward Surge Current, 8.3 ms single half-sine-wave superimposed on rated load IFSM 50 A Forward Voltage (per element) VFM 1.1 V IRM 10 500 µA I2t Rating for Fusing (t<8.3ms) I2 t 10.4 A2 s Typical Total Capacitance (per element) (Note 1) CT 25 pF Typical Thermal Resistance, Junction to Ambient (Note 2) RqJA 40 °C/W Tj, TSTG -65 to +150 °C Peak Reverse Current at Rated DC Blocking Voltage (per element) @ IF = 1.0A @ TA = 25°C @ TA = 125°C Operating and Storage Temperature Range Notes: 1. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0V DC. 2. Thermal resistance, junction to ambient, measured on PC board with 5.0mm2 (0.03mm thick) land areas. 3. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS17001 Rev. 13 - 2 1 of 3 www.diodes.com DF005S-DF10S ã Diodes Incorporated 60 Hz Resistive or Inductive load 0.5 0 40 60 100 80 120 10 IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD CURRENT (A) 1.0 1.0 0.1 0.01 140 0.4 1.0 1.2 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typ Forward Characteristics (per element) TA, AMBIENT TEMPERATURE (°C) Fig. 1 Output Current Derating Curve 60 100 Tj = 25°C f = 1.0 Mhz Vsig = 50 mV p-p Single half-sine-Wave 50 CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 0.8 0.6 40 30 20 10 10 0 1 10 1 100 1 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance (per element) NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Peak Forward Surge Current 100 Tj = 125°C 10 1.0 Tj = 25°C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typ Reverse Characteristics (per element) DS17001 Rev. 13 - 2 2 of 3 www.diodes.com DF005S-DF10S Ordering Information (Note 4) Device* Packaging Shipping DFxS DFxS-T DF-S DF-S 50 Per Tube 1500/Tape & Reel, 13-inch * x = Device type, e.g. DF005S or DF10S, etc. Notes: 4. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information DFxxxS XXXX = Manufacturers’ code marking DFxxxS = Product type marking code, ex: DF10S YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52 IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS17001 Rev. 13 - 2 3 of 3 www.diodes.com DF005S-DF10S